# KORKİMYA — full text corpus

> Complete product and guide corpus for AI ingestion. Per-page Markdown for any URL below is also available by requesting it with the HTTP header `Accept: text/markdown`.

## Thermoplastic Polymers

### Polyethylene 271-701K
https://korkimya.com/sektorler/termoplastik-polimerler/polietilen-271-701k
For wire and cable insulation.
- Production method: Gas-phase polymerisation using Unipol technology
- Processing method: Extrusion
- Density (at 20°C), g/cm³: 0,956 – 0,964
- Melt flow index, g/10 min, 190°C/5,0 kgf: 0,30 – 0,60
- Within-batch MFI deviation, %, max.: ±10
Packaging: Polyethylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 6 years from the date of manufacture

### Polyethylene 271-70K
https://korkimya.com/sektorler/termoplastik-polimerler/polietilen-271-70k
For primary cable sheathing and various electrotechnical products.
- Production method: Gas-phase polymerisation using Unipol technology
- Processing method: Extrusion
- Density (at 20°C), g/cm³: 0,950 – 0,955
- Melt flow index, g/10 min, 190°C/5,0 kgf: 0,40 – 0,65
- Within-batch MFI deviation, %, max.: ±10
Packaging: Polyethylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 6 years from the date of manufacture

### Polyethylene 273-83
https://korkimya.com/sektorler/termoplastik-polimerler/polietilen-273-83
Blow-moulded containers of up to 120 litres; products in contact with dry and bulk goods, water- and oil-based products and chemicals.
- Production method: Gas-phase polymerisation using Unipol technology
- Processing method: Extrusion, blow moulding
- Density (at 23°C), g/cm³: 0,950 – 0,954
- Melt flow index, g/10 min, 190°C/5,0 kgf: 0,40 – 0,55
- Within-batch MFI deviation, %, max.: ±10
Packaging: Polyethylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 6 years from the date of manufacture

### Polyethylene 276-73
https://korkimya.com/sektorler/termoplastik-polimerler/polietilen-276-73
Blow-moulded containers of up to 20 litres and moulded parts of up to 250 g. Food-contact products and toys.
- Production method: Gas-phase polymerisation using Unipol technology
- Processing method: Blow moulding, injection moulding
- Density (at 20°C), g/cm³: 0,958 – 0,963
- Melt flow index, g/10 min, 190°C/5,0 kgf: 2,6 – 3,2
- Within-batch MFI deviation, %, max.: ±10
Packaging: Polyethylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 6 months from the date of manufacture

### Polyethylene 277-73
https://korkimya.com/sektorler/termoplastik-polimerler/polietilen-277-73
Large technical products over 250 g. Food-contact products and toys.
- Production method: Gas-phase polymerisation using Unipol technology
- Processing method: Injection moulding
- Density (at 20°C), g/cm³: 0,958 – 0,964
- Melt flow index, g/10 min, 190°C/5,0 kgf: 17,0 – 25,0
- Within-batch MFI deviation, %, max.: ±10
Packaging: Polyethylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 6 months from the date of manufacture

### Polietilen PE4BM-41
https://korkimya.com/sektorler/termoplastik-polimerler/polietilen-pe4bm-41
Cultural goods and household items; short-term food contact up to 80°C.
- Production method: Gas-phase polymerisation using Unipol technology
- Processing method: Blow moulding
- Density (at 23°C), g/cm³: 0,950 – 0,954
- Melt flow index, g/10 min, 190°C/21,6 kgf: 12 – 19
- MFI21,6/MFI2,16 ratio, max.: 140
Packaging: Polyethylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 5 years from the date of manufacture

### Polietilen PE4BM-42
https://korkimya.com/sektorler/termoplastik-polimerler/polietilen-pe4bm-42
Blow-moulded containers of 20-100 litres; short-term food contact up to 80°C.
- Production method: Gas-phase polymerisation using Unipol technology
- Processing method: Blow moulding
- Density (at 23°C), g/cm³: 0,946 – 0,950
- Melt flow index, g/10 min, 190°C/21,6 kgf: 7 – 11
- MFI21,6/MFI5 ratio, min.: 18
Packaging: Polyethylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 5 years from the date of manufacture

### Polietilen PE4BM-50
https://korkimya.com/sektorler/termoplastik-polimerler/polietilen-pe4bm-50
Containers larger than 200 litres. Food-contact products up to 80°C and medical products.
- Production method: Gas-phase polymerisation using Unipol technology
- Processing method: Extrusion, blow moulding
- Density (at 23°C), g/cm³: 0,948 – 0,952
- Melt flow index, g/10 min, 190°C/21,6 kgf: 3,6 – 5,6
- MFI21,6/MFI5 ratio, min.: 18
Packaging: Polyethylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 5 years from the date of manufacture

### Polietilen PE4BP-30
https://korkimya.com/sektorler/termoplastik-polimerler/polietilen-pe4bp-30
General-purpose pipes and fittings; blow-moulded containers up to 20 litres; various films from 15 microns. Corresponds to PE 63 class according to ISO 9080:2003.
- Production method: Gas-phase polymerisation using Unipol technology
- Processing method: Extrusion, blow moulding
- Density (at 23°C), g/cm³: 0,930 – 0,935
- Melt flow index, g/10 min, 190°C/5,0 kgf: 1,1 – 1,5
- MFI21,6/MFI5 ratio, min.: 18
Packaging: Polyethylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 5 years from the date of manufacture

### Polietilen PE4EC-04S
https://korkimya.com/sektorler/termoplastik-polimerler/polietilen-pe4ec-04s
Primary insulation for oil-well submersible pump cables and mining cables. Stabilised at the granulation stage with highly effective antioxidants and a metal deactivator.
- Production method: Gas-phase polymerisation using Unipol technology
- Processing method: Extrusion
- Density (at 23°C), g/cm³: 0,944 – 0,948
- Melt flow index, g/10 min, 190°C/21,6 kgf: 10 – 14
- MFI21,6/MFI5 ratio, min.: 18
Packaging: Polyethylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 5 years from the date of manufacture

### Polietilen PE4FE-69
https://korkimya.com/sektorler/termoplastik-polimerler/polietilen-pe4fe-69
Production of blown-tube film; for food-contact products up to 80°C.
- Production method: Gas-phase polymerisation using Unipol technology
- Processing method: Extrusion
- Density (at 23°C), g/cm³: 0,946 – 0,950
- Melt flow index, g/10 min, 190°C/21,6 kgf: 7 – 11
- MFI21,6/MFI5 ratio, min.: 18
Packaging: Polyethylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 5 years from the date of manufacture

### Polietilen PE4FE-72
https://korkimya.com/sektorler/termoplastik-polimerler/polietilen-pe4fe-72
Production of blown-tube film from 6 microns; food-contact products.
- Production method: Gas-phase polymerisation using Unipol technology
- Processing method: Extrusion
- Density (at 23°C), g/cm³: 0,941 – 0,945
- Melt flow index, g/10 min, 190°C/5,0 kgf / 190°C/21,6 kgf: 0,5-0,7 / 12-16
- MFI21,6/MFI5 ratio, min.: 18
Packaging: Polyethylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 5 years from the date of manufacture

### Polietilen PE4PP-25
https://korkimya.com/sektorler/termoplastik-polimerler/polietilen-pe4pp-25
Pipes and fittings for drinking water; food-contact products up to 80°C. Corresponds to PE 80 class according to ISO 9080:2003.
- Production method: Gas-phase polymerisation using Unipol technology
- Processing method: Extrusion, blow moulding
- Density (at 23°C), g/cm³: 0,937 – 0,941
- Melt flow index, g/10 min, 190°C/21,6 kgf: 12,0 – 16,0
- MFI21,6/MFI5 ratio, min.: 18
Packaging: Polyethylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 5 years from the date of manufacture

### Polietilen PE6FE-68
https://korkimya.com/sektorler/termoplastik-polimerler/polietilen-pe6fe-68
Production of blown-tube film. For food-contact products with cooking temperatures up to 80°C. Stabilised at the granulation stage with highly effective antioxidants and processing-aid additives.
- Production method: Gas-phase polymerisation using Unipol technology
- Processing method: Extrusion
- Density (at 23°C), g/cm³: 0,946 – 0,950
- Melt flow index, g/10 min, 190°C/21,6 kgf: 6 – 9
- MFI21,6/MFI5 ratio, min.: 18
Packaging: Polyethylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 5 years from the date of manufacture

### Polietilen PE33BM-51
https://korkimya.com/sektorler/termoplastik-polimerler/polietilen-pe33bm-51
Thin-wall small-volume containers and various extrusion products; food-contact products (up to 80°C), toys, medical products.
- Production method: Gas-phase polymerisation using Unipol technology
- Processing method: Extrusion, blow moulding
- Density (at 23°C), g/cm³: 0,954 – 0,959
- Melt flow index, g/10 min, 190°C/5,0 kgf: 1,5 – 1,9
- Within-batch MFI deviation, %, max.: ±10
Packaging: Polyethylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 5 years from the date of manufacture

### Polietilen PE3OT-49
https://korkimya.com/sektorler/termoplastik-polimerler/polietilen-pe3ot-49
Flat oriented tapes and flexible containers (up to 20 litres); film production; food-contact products up to 80°C.
- Production method: Gas-phase polymerisation using Unipol technology
- Processing method: Extrusion, blow moulding
- Density (at 23°C), g/cm³: 0,950 – 0,955
- Melt flow index, g/10 min, 190°C/5,0 kgf: 2,0 – 2,6
- Within-batch MFI deviation, %, max.: ±10
Packaging: Polyethylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 5 years from the date of manufacture

### Polipropilen RPG1034-04
https://korkimya.com/sektorler/termoplastik-polimerler/polipropilen-rpg1034-04
Production of biaxially oriented metallised film (high-speed extrusion).
- Production method: Gas-phase propylene polymerisation
- Melt flow index, g/10 min: 2,9 – 3,9
- Within-batch melt flow index deviation, %, max.: ±10
- Tensile yield strength, MPa, min.: 30
- Elongation at yield, %, min.: 8
Packaging: Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 3 years from the date of manufacture

### Polipropilen RPG1035-08
https://korkimya.com/sektorler/termoplastik-polimerler/polipropilen-rpg1035-08
Manufacture of monofilament, elastic tape and carpet backing.
- Production method: Gas-phase propylene polymerisation
- Melt flow index, g/10 min: 3,0 – 4,0
- Within-batch melt flow index deviation, %, max.: ±10
- Tensile yield strength, MPa, min.: 32
- Elongation at yield, %, min.: 7
Packaging: Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 3 years from the date of manufacture

### Polipropilen RPG1120-16
https://korkimya.com/sektorler/termoplastik-polimerler/polipropilen-rpg1120-16
Injection moulding of transparent general-purpose products.
- Production method: Gas-phase propylene polymerisation
- Melt flow index, g/10 min: 10,2 – 13,8
- Within-batch melt flow index deviation, %, max.: ±10
- Mass fraction of volatile matter, %, max.: 0,09
- Mass fraction of isotactic fraction, %, min.: 97
Packaging: Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 3 years from the date of manufacture

### Polipropilen RPG1250-20
https://korkimya.com/sektorler/termoplastik-polimerler/polipropilen-rpg1250-20
Production of carpet face yarn, bulked fibre and spunbond (high-speed drawing extrusion).
- Production method: Gas-phase propylene polymerisation
- Melt flow index, g/10 min: 21,3 – 28,8
- Within-batch melt flow index deviation, %, max.: ±10
- Tensile yield strength, MPa, min.: Not standardised
- Elongation at yield, %, min.: Not standardised
Packaging: Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 3 years from the date of manufacture

### Polipropilen RPG1350-21
https://korkimya.com/sektorler/termoplastik-polimerler/polipropilen-rpg1350-21
Thin-wall general-purpose products.
- Production method: Gas-phase propylene polymerisation
- Melt flow index, g/10 min: 29,8 – 40,3
- Within-batch melt flow index deviation, %, max.: ±10
- Tensile yield strength, MPa, min.: Not standardised
- Elongation at yield, %, min.: Not standardised
Packaging: Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 3 years from the date of manufacture

### Polipropilen RPG2002-24
https://korkimya.com/sektorler/termoplastik-polimerler/polipropilen-rpg2002-24
For hot and cold water pipes.
- Production method: Gas-phase propylene-ethylene copolymerisation
- Melt flow index, g/10 min: 0,2 – 0,3
- Within-batch melt flow index deviation, %, max.: ±10
- Tensile yield strength, MPa, min.: 22
- Elongation at yield, %, min.: 9
Packaging: Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 3 years from the date of manufacture

### Polipropilen RPG2019-25
https://korkimya.com/sektorler/termoplastik-polimerler/polipropilen-rpg2019-25
For blow moulding of transparent containers and extrusion of multilayer sheets.
- Production method: Gas-phase propylene-ethylene copolymerisation
- Melt flow index, g/10 min: 1,6 – 2,2
- Within-batch melt flow index deviation, %, max.: ±10
- Tensile yield strength, MPa, min.: 26
- Elongation at yield, %, min.: 9
Packaging: Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 3 years from the date of manufacture

### Polipropilen RPG2350-34
https://korkimya.com/sektorler/termoplastik-polimerler/polipropilen-rpg2350-34
Injection moulding of high-clarity thin-wall products.
- Production method: Gas-phase propylene-ethylene copolymerisation
- Melt flow index, g/10 min: 30 – 40,3
- Within-batch melt flow index deviation, %, max.: ±10
- Tensile yield strength, MPa, min.: 24
- Elongation at yield, %, min.: 8
Packaging: Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 3 years from the date of manufacture

### Polipropilen RPG3008-36
https://korkimya.com/sektorler/termoplastik-polimerler/polipropilen-rpg3008-36
Impact PP; for the production of sheets, plates, pipes and blow-moulded products.
- Production method: Gas-phase propylene-ethylene copolymerisation
- Melt flow index, g/10 min: 0,7 – 0,9
- Within-batch melt flow index deviation, %, max.: ±10
- Tensile yield strength, MPa, min.: 21
- Elongation at yield, %, min.: 9
Packaging: Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 3 years from the date of manufacture

### Polipropilen RPG3013-37
https://korkimya.com/sektorler/termoplastik-polimerler/polipropilen-rpg3013-37
Impact PP; production of corrugated, wave-profile and trapezoidal sheets by extrusion and blow moulding.
- Production method: Gas-phase propylene-ethylene copolymerisation
- Melt flow index, g/10 min: 1,1 – 1,5
- Within-batch melt flow index deviation, %, max.: ±10
- Tensile yield strength, MPa, min.: 25
- Elongation at yield, %, min.: 6
Packaging: Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 3 years from the date of manufacture

### Polipropilen RPG3093-42
https://korkimya.com/sektorler/termoplastik-polimerler/polipropilen-rpg3093-42
Impact PP; for household goods and automotive industry products.
- Production method: Gas-phase propylene-ethylene copolymerisation
- Melt flow index, g/10 min: 7,9 – 10,7
- Within-batch melt flow index deviation, %, max.: ±10
- Tensile yield strength, MPa, min.: 22
- Elongation at yield, %, min.: 3
Packaging: Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 3 years from the date of manufacture

### Polipropilen RPG3120-43
https://korkimya.com/sektorler/termoplastik-polimerler/polipropilen-rpg3120-43
Impact PP; injection moulding for household goods, technical products and the automotive industry.
- Production method: Gas-phase propylene-ethylene copolymerisation
- Melt flow index, g/10 min: 10,2 – 13,8
- Within-batch melt flow index deviation, %, max.: ±10
- Tensile yield strength, MPa, min.: 18
- Elongation at yield, %, min.: 7
Packaging: Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 3 years from the date of manufacture

### Polipropilen RPG3200-39
https://korkimya.com/sektorler/termoplastik-polimerler/polipropilen-rpg3200-39
Injection moulding of thin-wall household goods.
- Production method: Gas-phase propylene-ethylene copolymerisation
- Melt flow index, g/10 min: 17 – 23
- Within-batch melt flow index deviation, %, max.: ±10
- Tensile yield strength, MPa, min.: 24
- Elongation at yield, %, min.: 5
Packaging: Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 3 years from the date of manufacture

### Polipropilen RPG3350-48
https://korkimya.com/sektorler/termoplastik-polimerler/polipropilen-rpg3350-48
Impact PP; thin-wall technical and household products.
- Production method: Gas-phase propylene-ethylene copolymerisation
- Melt flow index, g/10 min: 30 – 40,3
- Within-batch melt flow index deviation, %, max.: ±10
- Tensile yield strength, MPa, min.: 21
- Elongation at yield, %, min.: 4
Packaging: Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 3 years from the date of manufacture

### Polipropilen RPG4012-37
https://korkimya.com/sektorler/termoplastik-polimerler/polipropilen-rpg4012-37
Production of corrugated, wave-profile and trapezoidal sheets by extrusion and blow moulding.
- Production method: Gas-phase propylene-ethylene copolymerisation
- Melt flow index, g/10 min: 0,8 – 1,6
- Within-batch melt flow index deviation, %, max.: ±15
- Tensile yield strength, MPa, min.: 22
- Elongation at yield, %, min.: 6
Packaging: Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 3 years from the date of manufacture

### Polipropilen RPG4024-04
https://korkimya.com/sektorler/termoplastik-polimerler/polipropilen-rpg4024-04
Production of biaxially oriented film.
- Production method: Gas-phase propylene-ethylene copolymerisation
- Melt flow index, g/10 min: 1,6 – 3,2
- Within-batch melt flow index deviation, %, max.: ±15
- Tensile yield strength, MPa, min.: 21
- Elongation at yield, %, min.: 6
Packaging: Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 3 years from the date of manufacture

### Polipropilen RPG4097-11
https://korkimya.com/sektorler/termoplastik-polimerler/polipropilen-rpg4097-11
Cast film production.
- Production method: Gas-phase propylene-ethylene copolymerisation
- Melt flow index, g/10 min: 6,4 – 13
- Within-batch melt flow index deviation, %, max.: ±15
- Tensile yield strength, MPa, min.: Not standardised
- Elongation at yield, %, min.: Not standardised
Packaging: Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road. · Shelf life: 3 years from the date of manufacture

## Bio-Based Products

### Distilled Tall Oil (DTO) Industrial Grade
https://korkimya.com/sektorler/bio-bazli-urunler/distilled-tall-oil-dto-industrial-grade
CAS 8002-26-4 | Formula Kompleks karışım
Asphalt and bitumen modification, Production of flotation chemicals, Adhesive and binder formulations, Fuel additive production, Industrial lubricant and grease formulations, Rubber and plastic processing, Emulsifier and surfactant production
- Appearance: Amber to dark amber-coloured liquid, clear
- Colour (Iodine): 80
- Acid number: 165
- Saponification number: 170
- Resin acid content: 40
Packaging: ISO Tank containers 20-22 MT net. Bulk liquid shipment in clean, dry, closed tanks. · Shelf life: 12 months (from date of manufacture)

### Distilled Tall Oil (DTO) Mid-High Grade
https://korkimya.com/sektorler/bio-bazli-urunler/distilled-tall-oil-dto-mid-high-grade
CAS 8002-26-4 | Formula Karma karışım
Production of alkyd resin and paint binders, Adhesive and filler formulations, Coating and varnish applications, Lubricant additive and process fluid production, Esterification reactions and plasticiser synthesis, Metalworking and cutting fluid formulations, Specialty industrial chemical production
- Appearance: Amber-coloured liquid, clear
- Acid number: 170
- Saponification number: 175
- Resin acid content: 30
- Unsaponifiable matter: 7
Packaging: ISO Tank containers 20-22 MT net. Bulk liquid shipment in clean, dry, closed tanks. · Shelf life: 12 months (from date of manufacture)

### Distilled Tall Oil (DTO) Premium
https://korkimya.com/sektorler/bio-bazli-urunler/distilled-tall-oil-dto-premium
CAS 8002-26-4 | Formula Kompleks karışım
Premium alkyd resin and paint binder production, Specialty coating and high-gloss varnish applications, High-performance adhesive and filler formulations, Esterification reactions for lubricant esters, Metalworking fluid and cutting oil formulations, Specialty resin and polymer production,...
- Appearance: Light amber-coloured liquid, clear and bright
- Acid number: 170
- Saponification number: 175
- Resin acid content: 30
- Unsaponifiable matter: 6
Packaging: ISO Tank containers 20-22 MT net. Shipment in clean, dry, closed tanks protected from contamination. · Shelf life: 12 months (from date of manufacture)

### Ecophalt (Tall Oil Pitch)
https://korkimya.com/sektorler/bio-bazli-urunler/ecophalt-tall-oil-pitch
CAS 8016-81-7 | Formula Kompleks karışım
Synonyms: Çam Yağı Zifti, Cam Yagi Zifti
Asphalt modification, Road paving, Roofing applications, Petrochemical applications
- Appearance: Dark brown to black viscous liquid
- Acid value: 40 – 70
- Softening point: 20
- Viscosity, 50°C: 60 – 300
- Viscosity, 100°C: 30 – 60
Packaging: Heated ISO tank containers, with coils. · Shelf life: 1 year (extendable to 2 years with internal control)

### Ecosky-3103 (Bio-Based Rubber Process Oil)
https://korkimya.com/sektorler/bio-bazli-urunler/ecosky-3103-biyobazli-kaucuk-proses-yagi
Synonyms: Ecosky-3103, ECOSKY 3103, Biyobazlı Kauçuk Proses Yağı, Bio Based Rubber Process Oil, Tall Oil Bazlı Proses Yağı
100% bio-based, carbon-negative rubber process oil. Produced from tall oil derivatives and used as a drop-in or partial alternative to TDAE and MES oils. REACH-registered, outside the scope of EUDR, does not enter the food chain.
- Appearance: Dark-coloured liquid
- Density, 15°C: 955 – 995
- Viscosity gravity constant: 0.930 – 0.945
- Viscosity, 40°C: 200 – 500
- Viscosity, 100°C: 20 – 40
Packaging: Delivered as a liquid in ISO tank containers, road tankers or IBC containers. · Shelf life: 1 year (extendable to 2 years with CoA verification)

### Hardwood Crude Tall Oil (CTO)
https://korkimya.com/sektorler/bio-bazli-urunler/hardwood-crude-tall-oil-cto
CAS 8002-26-4 | Formula Karmaşık karışım
Synonyms: Sert Ahşap Ham Çam Yağı
Collector/modifier in froth flotation of oxidised ores and phosphates, Hydrophilisation and adhesion-enhancing additive for mineral materials and agglomerates, Anti-stripping agent / binder modifier in asphalt applications, Mould release agent for concrete and moulds, Binder or co-binder in...
- Appearance: Dark brown liquid
- Density, 15°C: 950 – 990
- Acid value: 96
- Water content: 2
- Flow point: 0
Packaging: Delivered as a liquid in ISO tank containers, road tankers or IBC containers. · Shelf life: 1 year (extendable to 2 years with internal control as per CoA and product data sheet)

### Softwood Crude Tall Oil (CTO)
https://korkimya.com/sektorler/bio-bazli-urunler/softwood-crude-tall-oil-cto
CAS 8002-26-4 | Formula Karmaşık karışım (reçine asitleri, yağ asitleri, nötr maddeler)
Synonyms: Yumuşak Ahşap Ham Çam Yağı
Distillation feedstock for tall oil fatty acids (TOFA), rosin and pitch, Biofuel and bioenergy applications (co-combustion, HVO/SAF feedstock), Production of emulsifiers and surfactants, Tyre processing and tyre manufacturing, Adhesive, filler and coating applications, Mining flotation chemicals,...
- Appearance: Dark viscous liquid with characteristic resinous odour
Packaging: Steel drums: 200 kg net. IBC (intermediate bulk container): 900-1000 kg net. Road tanker and rail tank wagon: bulk. Packaging options determined by mutual agreement. · Shelf life: 12 months (from date of manufacture)

### Sülfat Terebentin (CST)
https://korkimya.com/sektorler/bio-bazli-urunler/sulfat-terebentin-cst
Synonyms: Crude Sulfate Turpentine, CST
Sulphate turpentine is used as a raw material for obtaining refined sulphate turpentine and distillation products.
- Appearance: Liquid coloured from light yellow to yellow
- Density (at 20°C): 0,855 – 0,870
- Distillation volume fraction (101325 Pa, between 145-170 °C): 70
- Acid number: 0,7
- Mass fraction of evaporation residue: 0,8
Packaging: ISO Tank Container · Shelf life: 6 months (from date of manufacture)

### Tall Oil Fatty Acids 180 (TOFA)
https://korkimya.com/sektorler/bio-bazli-urunler/tall-oil-fatty-acids-180-tofa
CAS 61790-12-3 | Formula Karma karışım (ağırlıklı olarak C18 yağ asitleri)
Synonyms: Çam Yağı Yağ Asitleri 180
Flotation reagents for mineral processing, Bitumen and asphalt modification, Production of industrial soap and cleaning products, Rubber processing and compound preparation, Adhesive and filler formulations, Metalworking fluid and cutting oil production, Fuel blend and combustion additive...
- Appearance: Amber to dark amber-coloured liquid
- Acid value: 180
- Iodine value: 150
- Resin acid content: 3
- Unsaponifiables: 6
Packaging: ISO Tank containers 20-24 MT net. Bulk liquid shipment in carbon steel or stainless steel tanks. · Shelf life: 12 months; extendable to 24 months with quality control testing

### Tall Oil Fatty Acids 185 (TOFA)
https://korkimya.com/sektorler/bio-bazli-urunler/tall-oil-fatty-acids-185-tofa
CAS 61790-12-3 | Formula Kompleks karışım (ağırlıklı olarak C18 yağ asitleri)
Synonyms: Çam Yağı Yağ Asitleri 185
Production of alkyd resins and oil-modified polymers, Metalworking fluid and lubricant ester formulations, Dimer acid and polyamide production, Adhesive and filler systems, Rubber processing and compound preparation, Printing ink and pigment dispersion, Industrial soaps and cleaning products,...
- Appearance: Light yellow to amber-coloured liquid
- Acid value: 185
- Iodine value: 150
- Resin acid content: 2
- Unsaponifiables: 4
Packaging: ISO Tank containers 20-22 MT net. Bulk liquid shipment in carbon steel or stainless steel tanks. · Shelf life: 12 months; extendable to 24 months with controlled quality monitoring

### Tall Oil Fatty Acids Rich Distillate
https://korkimya.com/sektorler/bio-bazli-urunler/tall-oil-fatty-acids-rich-distillate
Synonyms: TOFA Rich Distillate
Provides stable performance and process efficiency in various industrial applications. Offers good compatibility, effective reactivity and reliable performance in formulations.
- Acid number: 178,5
- Saponification number: 184
- Mass fraction of unsaponifiable matter: 5,2
- Palmitic (mass %): 3,8
- Linoleic and its isomers (mass %): 32,8 + 7,3
Packaging: Packaged in IBC and ISO Tank Containers.

## Inorganic Chemicals

### Potassium Hydroxide (KOH) 48%
https://korkimya.com/sektorler/inorganik-kimyasallar/potassium-hydroxide-koh-48
CAS 1310-58-3 | UN 1814 | Formula KOH
A clear 48% potassium hydroxide solution; a strong inorganic base used in the production of liquid soap, potassium salts, fertilizers and specialty chemicals.
- Appearance: Colourless liquid
- Potassium hydroxide (KOH), %: 48
- Chloride (Cl), %: 0,002
- Potassium chlorate (KClO3), %: 0,005
- Iron (Fe), %: 0,0002
Packaging: 1000 kg IBC / composite container · bulk (tanker) on request. · Shelf life: 12 months

### Potassium Hydroxide (KOH) 90%
https://korkimya.com/sektorler/inorganik-kimyasallar/potassium-hydroxide-koh-90
CAS 1310-58-3 | UN 1813 | Formula KOH
High-purity 90% potassium hydroxide (solid flakes/pellets); a strong inorganic base used in the production of liquid soap, potassium salts, fertilizers and specialty chemicals.
- Appearance: White flakes / pellets
- Potassium hydroxide (KOH), %: 90
- Potassium carbonate (K2CO3), %: 0,5
- Chloride (Cl), %: 0,005
- Sulphate (SO4), %: 0,002
Packaging: 25 kg PE bag · 1000 kg big-bag. · Shelf life: 24 months

### Inhibited Hydrochloric Acid
https://korkimya.com/sektorler/inorganik-kimyasallar/inhibited-hydrochloric-acid
CAS 7647-01-0 | UN 1789 | Formula HCl (sulu çözelti + inhibitör)
Synonyms: İnhibitörlü Hidroklorik Asit
Acid stimulation (matrix acidising) of oil and natural gas wells. Chemical cleaning of inorganic deposits from boilers, heat exchangers and industrial equipment. Acid pickling of ferrous and non-ferrous metals. Dissolution of cement and carbonate deposits. Metal surface preparation and...
- Appearance — available grades: SINIF A, SINIF B/C, SINIF D
- Mass fraction of HCl (%) — available grades: SINIF A, SINIF B/C, SINIF D
- Acid ratio (as HCl) (%) — available grades: SINIF A, SINIF B/C, SINIF D
- Density (20°C) (g/cm³) — available grades: SINIF A, SINIF B/C, SINIF D
- Iron content (total), max. (%) — available grades: SINIF A, SINIF B/C, SINIF D
Packaging: In airtight tanks made of materials resistant to hydrochloric acid (rubber-lined or enamelled steel; lined with graphite-plastic or diabase tiles). Bulk transport.

### CALCIUM HYPOCHLORITE
https://korkimya.com/sektorler/inorganik-kimyasallar/kalsiyum-hipoklorit
CAS 7778-54-3 | UN 3485 | Formula Ca(ClO)2
Used as an oxidising agent in various chemical processes and for the neutralisation of cyanide-containing wastewater and waste gases in the gold mining industry. Brand B calcium hypochlorite is also used for the disinfection of drinking and swimming pool water, animal cemeteries, septic tanks and...
- Appearance — available grades: A, B, S
- Mass fraction of active chlorine, %, min. — available grades: A, B, S
- Mass fraction of water, % — available grades: A, B, S
- Mass fraction of insoluble sediment, %, max. — available grades: A, B, S
- Thermal stability coefficient, min. — available grades: A, B, S
Packaging: Galvanised steel drums, thin-walled steel drums, lidded steel barrels, polyethylene barrels. Steel drums and barrels shall have polyethylene film inner bags.

### SIVI KLOR
https://korkimya.com/sektorler/inorganik-kimyasallar/sivi-klor
CAS 7782-50-5 | UN 1017 | Formula Cl2
- in the chemical industry for the production of chloroorganic and inorganic compounds (vinyl chloride, chloroform, dichloromethane, hydrochloric acid, propylene oxide), and for the production of bleaching agents; - in the pulp and paper industry for the bleaching of wood and paper pulp; - in the...
- Volume fraction of chlorine, %, min.: 99,8
- Mass fraction of water, %, max.: 0,01
- Mass fraction of nitrogen trichloride, %, max.: 0,002
- Mass fraction of non-volatile residue, %, max.: 0,015
Packaging: Rail tank wagons, tanker vehicles. · Shelf life: 12 months

### Sodium Hypochlorite 20%
https://korkimya.com/sektorler/inorganik-kimyasallar/sodium-hypochlorite-20
CAS 7681-52-9 | UN 1791 | Formula NaClO
Synonyms: Sodyum Hipoklorit
Disinfection of drinking water networks (Brand A - registered disinfectant). Disinfection of swimming pool water (Brand A). Oxidising reagent in the vitamin industry (Brand B). Bleaching of fabrics in the textile industry (Brand B). Industrial water treatment and sterilisation. Wastewater and...
- Appearance: Greenish-yellow homogeneous liquid
- Light transmittance coefficient (%): 20
- Active chlorine concentration (g/dm³): 190
- Alkali (as NaOH) (g/dm³): 10 – 20
- Iron concentration, max. (g/dm³): 0,02
Packaging: Rubber-lined steel tanks; corrosion-resistant containers lined with rubber, polyethylene or fibreglass.

### Sodium Hypochlorite 50%
https://korkimya.com/sektorler/inorganik-kimyasallar/sodium-hypochlorite-50
CAS 7681-52-9 | UN 1791 | Formula NaClO
Synonyms: Sodyum Hipoklorit
Disinfection of drinking water networks. Disinfection and treatment of swimming pool water. Industrial water treatment and sterilisation. Bleaching in the textile and paper industries. Oxidising reagent in the chemical industry. Disinfection of food facilities and equipment. Wastewater and...
- Appearance: Homogeneous liquid from light yellow to greenish yellow
- Light transmittance coefficient (%): 50
- Active chlorine concentration (g/dm³): 170
- Alkali (as NaOH) (g/dm³): 20 – 30
- Iron concentration, max. (g/dm³): 0,02
Packaging: Rubber-lined steel tanks; corrosion-resistant containers lined with rubber, polyethylene or fibreglass. Polyethylene barrels.

### TECHNICAL CALCIUM CHLORIDE (LIQUID)
https://korkimya.com/sektorler/inorganik-kimyasallar/teknik-kalsiyum-klorur-sivi
CAS 10043-52-4 | Formula CaCl2
Synonyms: kalsiyum klorür
- in the chemical, forest products and wood processing, oil, oil refining and petrochemical industries; - in refrigeration technology; - in construction and building materials production; - in non-ferrous metallurgy, road construction and operation; as a desiccant and for other purposes.
- Appearance: Transparent or slightly hazy solution of yellowish-grey or greenish colour
- Mass fraction of calcium chloride, %, min.: 35
- MgCl2 calculated as NaCl, %, max.: 3
- Mass fraction of water-insoluble residue, %, max.: 0,15
Packaging: Steel rail tank wagons, tanker vehicles. · Shelf life: 8 months from date of manufacture

### TECHNICAL SODIUM HYDROXIDE
https://korkimya.com/sektorler/inorganik-kimyasallar/teknik-sodyum-hidroksit
CAS 1310-73-2 | UN 1824 | Formula NaOH
Synonyms: kostik soda, sodyum hidroksit, kostik
- in the chemical, petrochemical, pulp and paper industries, in non-ferrous metallurgy and other branches of the economy; - in the production of mineral fertilisers; - in oil refining and the petrochemical industry for oil processing and gas liquefaction, and in the production of diesel fuel,...
- Appearance: Colourless or coloured liquid. Formation of crystalline sediment is permitted
- Mass fraction of sodium hydroxide, %, min.: 46,0
- Mass fraction of sodium chloride, %, max.: 3,0
- Mass fraction of sodium carbonate, %, max.: 0,6
- Mass fraction of sodium chlorate, %, max.: 0,25
Packaging: Medium-tonnage cubic containers on metal pallets. The use of other packaging that preserves the integrity of the load during storage and transport is permitted; specially rubber-lined rail tank wagons. · Shelf life: 2 months in metal packaging; 12 months from date of manufacture in polyethylene or non-metal packaging

## Amines

### Amines, C12-14 Alkyldimethyl
https://korkimya.com/sektorler/aminler/amines-c12-14-alkyldimethyl
CAS 68439-71-4 | UN 2735 | Formula C14-16H31-35N
C12-14 alkyl dimethyl amine is a long-chain tertiary amine that serves as the key intermediate for cationic surfactants (quaternary ammonium compounds, amine oxides, betaines).
- Appearance: Colourless to pale-yellow clear liquid
- Purity, %: 98,0
- Water content, %: 0,10
- Colour (Hazen): 30
- Total amine value, mgKOH/g: 240 – 260
Packaging: Drum or IBC · bulk on request. · Shelf life: 12 months

### BENZAMINE N
https://korkimya.com/sektorler/aminler/benzamin-n
UN 3082
Benzamine N is used as a curing agent for epoxy resins.
- Appearance: Light brown to brown viscous resin
- Mass fraction of aminobenzylaniline, %, min.: 85
- Mass fraction of 4,4'-diaminodiphenylmethane, %, max.: 10
- Mass fraction of aniline, %, max.: 1,5
Packaging: Benzamine N is filled into steel barrels, aluminium barrels and steel drums. · Shelf life: 10 years from the date of manufacture

### DPG (Difenilguanidin)
https://korkimya.com/sektorler/aminler/dpg-difenilguanidin
CAS 102-06-7 | UN 2811 | Formula C13H13N3
Secondary vulcanisation accelerator for rubber compounds. Synergistic combination with thiazole and sulphenamide accelerators. Curing agent for shellac and phenolic resins. Vulcanisation activator in tyres and technical rubber goods. Nitrile, SBR and natural rubber compounds. Accelerator in the...
- Appearance (Class A): Beyazdan açık sarıya veya leylak rengine toz
- Appearance (Class B, C, D): Silindirik şekilli granüller
- Diphenylguanidine content, min.: 97
- Melting point (Class A, min.): 145,3
- Melting point (Class B, D): 146,0 – 150,0
Packaging: Three- or four-ply paper sacks with polyethylene inner liners; flexible BigBag containers made of polypropylene fabric. · Shelf life: 12 months

### Diethanolamine Pure (DEA)
https://korkimya.com/sektorler/aminler/dietanolamin-saf-dea
CAS 111-42-2 | Formula C4H11NO2
Glyphosate production. Gas treatment. Personal care products. Use of DEA in metalworking fluids, detergents and cleaners. Plastic and rubber additive. Processing aid for paper, textiles and leather. Etc.
- Diethanolamine: 99,2
- Impurities (water, monoethanolamine, triethanolamine, unidentified impurities): 0,8
- Water: 0,3
- Colour (Pt.-Co.): 20
- Crystallisation point: +26,5
Packaging: Steel drum: 220 kg / drum. Plastic drum: 235 kg / drum. IBC: 1100 kg net. Bulk. · Shelf life: 12 months

### Monoethanolamine Pure (MEA)
https://korkimya.com/sektorler/aminler/monoetanolamin-saf-mea
CAS 141-43-5 | Formula C2H7NO
Synonyms: Colamine, Glycinol, Olamine, Ethanolamine, 2-Aminoethanol
Ethyleneamine production. Gas treatment. Metalworking fluids. Electroplating. Detergents, cleaners and ink removers. Plastic and rubber additive. Wood preservation formulations. Personal care products. Etc.
- Monoethanolamine: 99,3
- Diethanolamine: 0,5
- Water: 0,4
- Colour (Pt.-Co.): 10
- Density (at 20°C): 1,010 – 1,025
Packaging: Steel drum: 210 kg / drum. Plastic drum: 222 kg / drum. IBC: 1010 kg net. Bulk. · Shelf life: 5-12 months

### POLYAMINE
https://korkimya.com/sektorler/aminler/poliamin
UN 3077
For obtaining liquid polyisocyanate used in the production of integral and rigid polyurethane foam; as a curing agent for epoxy resins.
- Mass fraction of 4,4'-diaminodiphenylmethane, %: 70-85
- Mass fraction of aniline, %, max.: 0,2
Packaging: Polyamine is packaged in steel drums, thick-walled welded steel barrels for chemical products and steel barrels. To enable discharge of the product from barrels and drums, it must be melted by external heating to a temperature of 70-90 °C. · Shelf life: 2 years from the date of manufacture

### TMQ (2,2,4-Trimetil-1,2-Dihidrokinolin Polimer)
https://korkimya.com/sektorler/aminler/tmq-2-2-4-trimetil-1-2-dihidrokinolin-polimer
CAS 147-47-7 | Formula (C12H15N)n
High-performance antioxidant and anti-ageing agent in technical rubber goods. Stabiliser in the production of large-size tyres (OTR, TBR). Protects rubber compounds against the effects of heat and oxygen. Anti-ozone-cracking agent in rubber compounds. Synergistic use in combination with other...
- Appearance — available grades: SINIF B, SINIF C
- Softening temperature — available grades: SINIF B, SINIF C
- Secondary amines, min. — available grades: SINIF B, SINIF C
- Primary amines, max. — available grades: SINIF B, SINIF C
- Ash content, max. — available grades: SINIF B, SINIF C
Packaging: Four-ply paper sacks or flexible containers (BigBag). Alternative packaging options are available on request. · Shelf life: 12 months

### Trietanolamin 85%
https://korkimya.com/sektorler/aminler/trietanolamin-85
CAS 102-71-6 | Formula C6H15NO3
Synonyms: Nitrilotriethanol, TEA, Tris(2-Hydroxyethyl)amine
Liquid laundry detergents, esterquats, dishwashing detergents, lubricating greases and specialty lubricants, polishes, metalworking fluids, corrosion inhibitors, cleaners and degreasers, paints and printing inks. Also used in cement production, cosmetics and medicine, laboratory environments,...
- Appearance: Transparent liquid between colourless and light yellow
- Triethanolamine: 85
- Diethanolamine: 15
- Water: 0,5
- Density (at 20°C): 1,100 – 1,130
Packaging: Steel drum: 225 kg / drum. Plastic drum: 235 kg / drum. IBC: 1100 kg. Bulk. · Shelf life: 12 months

### DMEA (Dimetiletanolamin)
https://korkimya.com/sektorler/aminler/dmea-dimetiletanolamin
CAS 108-01-0 | UN 2051 | Formula C4H11NO
Synonyms: Dimethylethanolamine, DMEA, N,N-Dimethylethanolamine, DMAE, 2-(Dimethylamino)ethanol
Multi-purpose tertiary amino alcohol · neutraliser for water-based paints, corrosion inhibitor, polyurethane catalyst, fuel additive and pharmaceutical synthesis intermediate
- Appearance: Colorless to pale yellow clear oily liquid
- Dimethylethanolamine Content (%): 99.7
- Total Impurities (%): 0.3
- Water content (%): 0.1
- Vinyloxyethanol (%): 0.003
Packaging: 180 kg steel drum (216.5 L), 1000 kg IBC tank or bulk by tanker · Shelf life: 12 months from date of manufacture

## Silicon Chemicals

### Hydrophilic Amorphous Fumed Silica (K-200)
https://korkimya.com/sektorler/silikon-kimyasallari/hydrophilic-amorphous-fumed-silica-k-200
CAS 112945-52-5 | Formula SiO2
K-200 is a high-purity hydrophilic amorphous fumed silica with a specific surface area of 200 m²/g; it is used for rheology and thixotropy control, reinforcement and viscosity build-up.
- Specific surface area (BET), m²/g: 200 ± 20
- pH (in 4% dispersion): 3,7 – 4,7
- Loss on drying (2 h, 105°C), %: 1,0
- Loss on ignition (2 h, 1000°C), %: 1,5
- SiO2 content, %: 99,8
Packaging: 10 kg multi-layer (PE-lined) kraft bag · big-bag on request. · Shelf life: 24 months

### ETHYL SILICATE-40
https://korkimya.com/sektorler/silikon-kimyasallari/etilsilikat-40
UN 1292
As a starting material for obtaining a binder used in the manufacture of moulds in foundry production.
- 400 nm: 0,5
- 670 nm: 0,1
- Mass fraction of silicon dioxide, %: 40 - 42
- Mass fraction of tetraethoxysilane, %: 10 - 15
- Density at 20 °C, g/cm3: 1,05 – 1,07
Packaging: Rail tank cars, containers, steel barrels. · Shelf life: 12 months from the date of manufacture

### PHENYLTRICHLOROSILANE
https://korkimya.com/sektorler/silikon-kimyasallari/feniltriklorosilan
CAS 98-13-5 | UN 1804 | Formula C6H5SiCl3
Synonyms: triklorofenilsilan, fenilsilikon triklorür
In the production of organosilicon oligomers and polymers.
- Appearance: Colourless or slightly coloured transparent liquid. Opalescence and mechanical impurities resulting from packaging are permitted
- Mass fraction of phenyltrichlorosilane, %, min.: 99,3
- Mass fraction of impurities, %, max.: 0,7
- - diphenyl: 0,15
- - total mass fraction of hydrogen-containing impurities (trichlorosilane, phenyldichlorosilane): 0,2
Packaging: Rail tank cars, road tankers, special tank containers, steel barrels. · Shelf life: 12 months from the date of manufacture

### General-Purpose Silicone Resin Solution
https://korkimya.com/sektorler/silikon-kimyasallari/genel-amacli-silikon-recine-cozeltisi
UN 1263
Technical grade: used in the production of general-purpose silicone organic enamels; enhanced grade: used in the modification of various paint and varnish materials.
- Appearance: Homogeneous liquid from light yellow to dark brown. Gel-like sediment formation is permitted
- Mass fraction of non-volatile matter, %: 65 ±5
- Density at +20 °C, g/cm3: 0,99 - 1,15
- max.: 6
- Viscosity at (20 ± 0,5) °C using VZ-246 viscometer with 4 mm nozzle diameter, min.: Minimum, with VZ-246 viscometer, 4 mm nozzle diameter
Packaging: Rail tank cars, steel barrels, thick-walled steel barrels, galvanised or aluminium barrels. For road transport, the resin may be placed in the customer's transport packaging. · Shelf life: 1 year from the date of manufacture

### PFMS Resin
https://korkimya.com/sektorler/silikon-kimyasallari/pfms-recine
UN 1866
Synonyms: PFMS
Used in the production of general-purpose bituminous mastics, enamels and paints, and as a hydrophobising agent; used to impregnate wood and concrete products and to impart flame-retardant properties to them.
- Appearance: Light yellow to brown liquid. Gel-like sediment and mechanical impurities resulting from packaging are permitted
- Mass fraction of non-volatile matter, %: 55 ±5
Packaging: Road tankers, rail tank cars, tank containers, steel barrels with a capacity of 200 L, steel drums. By agreement with the customer, the product may also be packed in other packaging that ensures product integrity. · Shelf life: 12 months from the date of manufacture

### Silicone Organic Resin
https://korkimya.com/sektorler/silikon-kimyasallari/silikon-organik-recine
UN 1866
Silicone organic resin 134-276 (solution); used in the production of general-purpose enamels and paints.
- Appearance — available grades: A, B
- Mass fraction of non-volatile matter, % — available grades: A, B
Packaging: Rail tank cars, steel barrels. For road transport, the product may be placed in the customer's transport packaging. · Shelf life: 1 year from the date of manufacture

### TETRAETHOXYSILANE
https://korkimya.com/sektorler/silikon-kimyasallari/tetraetoksisilan
CAS 78-10-4 | UN 1292 | Formula Si(C2H5O)4
Synonyms: ortosilikat asidinin tetraetil esteri, tetraetilortosilikat, tetraetilsilikat, tetraetilsilisik asidin esteri
For preparing binder solutions in the manufacture of ceramic moulds in investment casting; as a binder component in heat- and chemical/atmospheric-resistant coatings and other areas, where, after hydrolysis in alkaline media, drying or calcination, a hard, durable material is required that is...
- Appearance: Transparent liquid. Mechanical impurities resulting from metal packaging are permitted
- Mass fraction of main substance, %, min.: 98,5
- Density, g/cm3: 0,930 - 0,940
- Mass fraction of chloride ion, %, max.: 0,02
- Mass fraction of ethanol, %, max.: 0,42
Packaging: Special stainless steel rail tank cars, aluminium rail tank cars, polyethylene barrels. · Shelf life: 12 months from the date of manufacture

### TRICHLOROSILANE
https://korkimya.com/sektorler/silikon-kimyasallari/triklorosilan
CAS 10025-78-2 | UN 1295 | Formula Cl3HSi
Synonyms: triklorosilan, silikorokloroform
Grade A - for export and silane production; Grade B - for the production of organosilicon products; Grade V - for the production of phenyltrichlorosilane used in heat-resistant and electrical-insulation varnishes, resins, hydrophobising fluids and oils.
- Colourless transparent liquid: Colourless or yellow-coloured liquid. Mechanical impurities are permitted
- Mass fraction of trichlorosilane, %, min.: 99,5
- Mass fraction of silicon tetrachloride, %, max.: 0,25
- Mass fraction of dichlorosilane, %, max.: 0,05
- Mass fraction of iron, mg/kg, max.: 1,0
Packaging: Special tank wagons, special tank containers. · Shelf life: Grade A - 90 days from the date of manufacture; Grades B and V - 12 months from the date of manufacture

## Solvents

### Acetone Technical
https://korkimya.com/sektorler/solventler/acetone-technical
CAS 67-64-1 | UN 1090 | Formula C3H6O
Solvent in paint and varnish manufacture · Nitrocellulose coating and lacquer formulations · Industrial surface cleaning and degreasing · Synthetic resin and adhesive systems · Raw material in methyl methacrylate (MMA) production · Bisphenol-A (BPA) synthesis · Chemical synthesis processes and...
- Appearance: Colourless, clear liquid
- Acetone content (%): 99,75
- Density (20°C) (g/cm³): 0,789 – 0,791
- Water content (%): 0,20
- Methyl alcohol content (%): 0,05
Packaging: Steel drum: 160-180 kg · IBC tank: 800-900 kg · ISO tank: 20-22 MT · Shelf life: 12 months

### Isopropyl Alcohol (IPA)
https://korkimya.com/sektorler/solventler/isopropyl-alcohol-ipa
CAS 67-63-0 | UN 1219 | Formula C3H8O
Industrial cleaner and degreaser formulations · Solvent for paint, varnish and coating systems · Printing and graphic arts chemicals · Electronic surface cleaning applications · Cosmetics and personal care products · Disinfectant and antiseptic manufacture · Perfumery and fragrance formulations ·...
- Appearance: Colourless, clear liquid
- Density (20°C) (g/cm³): 0,785 – 0,786
- Isopropyl alcohol content (%): 99,7
- Colour (Pt-Co scale) (Pt-Co): 5
- Acidity (acetic acid) (%): 0,0007
Packaging: Steel drum: 160-180 kg · IBC tank: 800-900 kg · ISO tank: 20-24 MT · Tanker: 24-26 MT · Shelf life: 12 months

### ISOPROPYL ALCOHOL 99.7%
https://korkimya.com/sektorler/solventler/izopropil-alkol-99-7
CAS 67-63-0 | UN 1219 | Formula C3H8O
Isopropyl alcohol is used as a solvent in organic synthesis and in various branches of industry. It is used in the production of glass-cleaning fluids.
- Technical: Grade C
- Appearance: Colourless transparent liquid free of mechanical impurities
- Density at 20 °C, g/cm3: 0,785-0,786
- Mass fraction of isopropyl alcohol, %, min.: 99,7
- Colour intensity by platinum-cobalt scale, max.: 5
Packaging: Tank containers, road tankers. · Shelf life: 12 months from the date of manufacture

### TECHNICAL ISOPROPYL ALCOHOL
https://korkimya.com/sektorler/solventler/teknik-izopropil-alkol
CAS 67-63-0 | UN 1219 | Formula C3H8O
Isopropyl alcohol is used for cleaning surfaces and hands and as a component of disinfection and cleaning products.
- Appearance: Colourless transparent liquid
- Mass fraction of isopropyl alcohol, %, min.: 75
Packaging: Road tankers, tank containers. · Shelf life: 12 months from the date of manufacture

### Xylene (Mixed)
https://korkimya.com/sektorler/solventler/xylene-mixed
CAS 1330-20-7 | UN 1307 | Formula C8H10
Strong aromatic solvent in paint, varnish and coating systems · Synthetic resin and adhesive formulations · Raw material for p-xylene and phthalic anhydride in the petrochemical industry · Printing inks and graphic chemicals · Solvent for tyre and rubber processing · Agrochemical formulations ·...
- Appearance: Clear and bright liquid
- Density (15°C) (kg/m³): 863 – 878
- Water content (mg/kg): 50
- Total xylene content (wt.%): 95,0
- C8 aromatics (wt.%): 95,0
Packaging: Supplied in bulk by ISO tank or road tanker. Alternative packaging options are available on request. · Shelf life: 24 months

## Hydrocarbon Resins

### C5-C9 Hydrocarbon Resin
https://korkimya.com/sektorler/hidrokarbon-recineler/c5-c9-hidrokarbon-recine
Synonyms: SPS-5/9 Kopolimer Rezin, C5-C9 Hydrocarbon Resin
Paint and varnish industry - lacquers, paints, enamels; Road marking; Production of adhesive and impregnation compositions
- Softening point: 85 °C – 120 °C
- Colour (Gardner scale, 50% toluene solution): 1 #Ga – 7 #Ga
- Acid number: 1.0 mg KOH/g
- Iodine number: 50 J/100 cm³
- Relative density: 1.05 g/cm³ – 1.12 g/cm³
Packaging: Paper or polypropylene bags with 25 kg net weight. Big bags: 500 kg and 1000 kg. · Shelf life: 12 months (at temperatures not exceeding 50 degrees C)

### C9 Hydrocarbon Resin
https://korkimya.com/sektorler/hidrokarbon-recineler/c9-hidrokarbon-recine
CAS 68131-77-1
Synonyms: C9 Aromatik Hidrokarbon Rezini, C9 Hydrocarbon Resin
Printing inks and coatings; Hot-melt adhesives; Modifier in rubber and elastomer compounds; Binder in paints and varnishes; Adhesive tapes and labels; Floor coatings and waterproofing products
- Appearance: Granules 3-8 mm in diameter or irregularly shaped flakes; solid material ranging from yellow to brown
- Colour - iodometric scale (50% xylene solution): 10 mg J2/100 cm³ – 30 mg J2/100 cm³
- Gardner colour scale: 5 birim – 8 birim
- Softening point: 75 °C – 145 °C
- Acid number: 1,0 mg KOH/g
Packaging: Kraft bag: 25 kg. Big bag: 500-1000 kg. Filled drum: as per customer request. · Shelf life: 12 months (in original packaging)

## Surfactants

### 3-(Dimethylamino) Propylamine (DMAPA)
https://korkimya.com/sektorler/yuzey-aktif-maddeler/3-dimethylamino-propylamine-dmapa
CAS 109-55-7 | UN 2734 | Formula C5H14N2
DMAPA is a key intermediate in surfactant production, primarily for cocamidopropyl betaine; it is used in water treatment, epoxy curing and ion exchange resins.
- Appearance: Colourless to pale-yellow clear liquid
- Purity, %: 99,5
- Water content, %: 0,1
- Colour (Hazen): 20
- Boiling point, °C: 133 – 135
Packaging: Drum or IBC · bulk upon request. · Shelf life: 12 months

### C16-18 Fatty Alcohol Ethoxylate 12EO
https://korkimya.com/sektorler/yuzey-aktif-maddeler/c16-18-fatty-alcohol-ethoxylate-12eo
CAS 68439-49-6 | Formula C16-C18 yağlı alkol + 12 EO
Synonyms: Ceteareth-12
Primary emulsifier in cosmetic O/W emulsions (cream, lotion, foundation) · Hair care and conditioner formulations · Skin care and moisturiser formulations · Sun-care and skin-care emulsions · Auxiliary chemicals for textile and leather finishing · Industrial emulsion and dispersion formulations
- Appearance: Solid
- Hydroxyl value (mg KOH/g): 70 – 78
- Saponification value (mg KOH/g): 1,0
- Acid value (mg KOH/g): 0,5
- pH [1% solution]: 5,0 – 7,5
Packaging: 100 kg polymer drum or bulk. Alternative packaging options are available on request. · Shelf life: 24 months

### C16-18 Fatty Alcohol Ethoxylate 20EO
https://korkimya.com/sektorler/yuzey-aktif-maddeler/c16-18-fatty-alcohol-ethoxylate-20eo
CAS 68439-49-6 | Formula C16-C18 yağlı alkol + 20 EO
Synonyms: Ceteareth-20
Emulsifier for O/W cosmetic emulsions (cream, lotion, hair care products) · Wetting agent and dispersant in personal care products · Detergent and cleaning product formulations · Auxiliary chemicals for textile and leather processing · Emulsifier in agrochemical formulations · Industrial process...
- Appearance: White/cream solid in flake form
- Hydroxyl value (mg KOH/g): 48 – 54
- Water content (%): 1,0
- Cloud point [1% NaCl 10%] (°C): 74 – 80
- pH [5% solution]: 5,0 – 7,0
Packaging: 25 kg bag (500 kg per pallet). Alternative packaging options are available on request. · Shelf life: 24 months

### Ethoxylated Castor Oil
https://korkimya.com/sektorler/yuzey-aktif-maddeler/ethoxylated-castor-oil
CAS 61791-12-6
Synonyms: PEG-33 Castor Oil, Gliserol polietilen glikol risinoleat
Emulsifier for vegetable oils and fatty esters · Solubilisation of perfumes and active substances · Solubiliser in pharmaceutical and cosmetic formulations · Injection formulations and topical preparations · Food-approved emulsifier (feed grade) · Personal care and hair care formulations ·...
- Appearance: Clear yellow viscous liquid or semi-solid
- Identity (C and D): Conforms to EP test
- Solution appearance (S): Conforms to EP test
- Alkalinity (ml HCl 0,1M): 0,5
- Acid value (mg KOH/g): 2,0
Packaging: 200 kg drum, 1000 kg IBC container or bulk. Alternative packaging options are available on request.

### OKSANOL KD-6
https://korkimya.com/sektorler/yuzey-aktif-maddeler/oksanol-kd-6
CAS 71060-57-6 | UN 3082 | Formula CnH2n+1O(CH2CH2O)mH
In the production of surfactants and as a component of synthetic detergents; In the leather and fur industry, as a levelling agent for dyeing leather and sheepskin with acid metal-complex and direct dyes; As an emulsifier and degreaser; In the production of insecticide preparations and pesticide...
- Appearance: Yellowish hazy liquid
- Colour intensity by iodine scale at 35-40 °C, mg J2/100 cm3, max.: 5
- Mass fraction of water, %, max.: 0,5
- 1%, °C: 65-88
Packaging: Steel drums, polyethylene drums, polyethylene canisters, metal transport containers. · Shelf life: 12 months from the date of manufacture

### Kokoamidopropil Betain (CAPB)
https://korkimya.com/sektorler/yuzey-aktif-maddeler/kokoamidopropil-betain-capb
CAS 61789-40-0 | Formula C19H38N2O3
Synonyms: Cocamidopropyl Betaine, CAPB, Coco Amido Propyl Betaine, Coconut Oil Amidopropyl Betaine, Alkylamidopropyl Betaine
Coconut oil derived amphoteric surfactant · foam booster and skin conditioner for shampoo, liquid soap, shower gel and bubble bath formulations
- Appearance: Pale yellow clear viscous liquid
- Active Matter Content (%): 29 – 31
- Total Solids (%): 36 – 38
- pH (5% aqueous solution): 4 – 6
- Sodium Chloride (NaCl, %): 6.5
Packaging: 220 kg plastic or steel drum, 1000 kg IBC tank or bulk by tanker · Shelf life: 12 months from date of manufacture

### Sodyum Laureth Sülfat (SLES)
https://korkimya.com/sektorler/yuzey-aktif-maddeler/sodyum-laureth-sulfat-sles
CAS 68585-34-2 | Formula C14H29NaO5S (genel - 2EO)
Synonyms: Sodium Laureth Sulfate, Sodium Lauryl Ether Sulfate, SLES, SLES 70, Sodium Lauryl Ether Sulphate
High-foaming anionic surfactant · main surfactant for shampoo, shower gel, liquid soap, dishwashing and laundry detergent formulations (70% active matter)
- Appearance (20°C): Colorless to pale yellow flowable paste
- Active Matter (%): 68 – 73
- Unsulfated Matter (%): 3.0
- Sodium Sulfate (Na2SO4, %): 1.5
- pH (5% aqueous solution): 7.5 – 10.0
Packaging: 230 kg plastic or steel drum, 1100 kg IBC tank or bulk by heated tanker · Shelf life: 6 months from date of manufacture

### Sodyum Lauril Sülfat (SLS)
https://korkimya.com/sektorler/yuzey-aktif-maddeler/sodyum-lauril-sulfat-sls
CAS 151-21-3 | Formula C12H25NaO4S
Synonyms: Sodium Lauryl Sulfate, SLS, Sodium Dodecyl Sulfate, SDS, Sodium Lauryl Sulphate
Strongly foaming anionic surfactant · used in toothpaste, industrial cleaners, textile auxiliaries and emulsion polymerisation (28-30% liquid form)
- Appearance (20°C): Colorless to pale yellow clear solution, slight opacity acceptable
- Active Matter (%): 28.0 – 30.0
- Unsulfated Matter (%): 2.0
- Sodium Sulfate (Na2SO4, %): 2.0
- pH (10% aqueous solution): 9 – 12
Packaging: 220 kg plastic drum, 1100 kg IBC tank or bulk by tanker · Shelf life: 12 months from date of manufacture

### Ethoxylated Fatty Alcohol C12-C14 3EO
https://korkimya.com/sektorler/yuzey-aktif-maddeler/etoksillenmis-yag-alkolu-c12-c14-3eo
CAS 68439-50-9
Synonyms: C12-14 Alcohol Ethoxylate 3EO, Lauryl Alcohol Ethoxylate 3 EO, Fatty Alcohol Ethoxylate C12-C14 3EO, AE3, Laureth-3
Low-foaming non-ionic surfactant · for heavy-duty degreasers, metal degreasing, textile wetting and agrochemical formulations (3 mol EO)
- Appearance (20°C): Clear or slightly hazy flowable liquid
- Color (Hazen, melt): 50
- pH (1% aqueous solution): 6 – 9
- Hydroxyl Number (mg KOH/g): 166 – 176
- Water content (%): 0.3
Packaging: 200 kg plastic or steel drum, 1000 kg IBC tank or bulk by heated tanker · Shelf life: 12 months from date of manufacture

### Ethoxylated Fatty Alcohol C12-C14 7EO
https://korkimya.com/sektorler/yuzey-aktif-maddeler/etoksillenmis-yag-alkolu-c12-c14-7eo
CAS 68439-50-9
Synonyms: C12-14 Alcohol Ethoxylate 7EO, Lauryl Alcohol Ethoxylate 7 EO, Fatty Alcohol Ethoxylate C12-C14 7EO, AE7, Laureth-7
Versatile non-ionic surfactant · for laundry detergent, liquid cleaners, textile and emulsion polymerisation applications (7 mol EO)
- Appearance (20°C): White to pale yellow viscous liquid or soft paste
- Color (Iodine scale, mg I2/100cm³): 4
- pH (1% aqueous solution): 6 – 9
- Cloud Point (1% aqueous solution, °C): 53 – 56
- Hydroxyl Number (mg KOH/g): 100 – 115
Packaging: 200 kg plastic or steel drum, 1000 kg IBC tank or bulk by heated tanker · Shelf life: 12 months from date of manufacture

## Oxidizing Chemicals

### Hydrogen Peroxide 30%
https://korkimya.com/sektorler/oksitleyici-kimyasallar/hydrogen-peroxide-30
CAS 7722-84-1 | Formula H2O2
Synonyms: Hidrojen Peroksit, Dihidrojen dioksit
Bleaching in textile and paper industries; Water treatment and disinfection; Chemical synthesis and process chemistry; Food industry (sterilisation of packaging and equipment); Electronics industry (cleaning and surface treatment); Cosmetics and personal care products
- Hydrogen peroxide content (H2O2): 35.0 % – 40.0 %
- Acetic acid concentration: 6.0 g/dm³
- Non-volatile residue concentration: 0.70 g/dm³
- Appearance: Colourless transparent liquid
Packaging: IBC tanks. Metal/plastic drums. Bulk transport (tanker). Net weight: as per individual order. · Shelf life: 6 months (from the date of manufacture)

### Hydrogen Peroxide 50%
https://korkimya.com/sektorler/oksitleyici-kimyasallar/hydrogen-peroxide-50
CAS 7722-84-1 | Formula H2O2
Synonyms: Hidrojen Peroksit
Textile and cellulose bleaching; Paper and pulp bleaching; Water treatment and disinfection; Chemical synthesis and oxidising agent; Electronics and semiconductor sector; Cosmetics and personal care products; Food industry (at permitted dosage)
- Hydrogen peroxide (H2O2) by mass: 50,0 % – 55,0 %
- Mass concentration of acetic acid: 6,0 g/dm³
- Mass concentration of non-volatile residue: 0,70 g/dm³
- Appearance: Colourless transparent liquid
Packaging: 1 m³ HDPE containers. Net weight: ~1,160 kg per container. Bulk shipment is possible. · Shelf life: Within the guaranteed period from the date of manufacture (H2O2 decrease max. 2.5%)

### Sodium Percarbonate (SPC)
https://korkimya.com/sektorler/oksitleyici-kimyasallar/sodium-percarbonate-spc
CAS 15630-89-4
Synonyms: Sodium percarbonate, disodium carbonate compound with hydrogen peroxide (2:3), SPC, Sodium Carbonate Peroxihydrate
Bleaching, cleaning and stain removal in detergent powders and automatic dishwasher detergents; Bleaching agent in textile and paper industries; Stain remover in stain-removal products; Oxidising disinfectant in various industrial cleaning applications
- Active oxygen content: 12.5 % – 13.5 %
- Bulk density: 1150 g/l – 1250 g/l
- Moisture content: 0.8 %
- Particle size >1600 μm: 1 %
- Particle size <150 μm: 2 %
Packaging: Big bag: 1000 kg. Bag: 25 kg.

## Oleochemicals

### 2-Octyldodecanol
https://korkimya.com/sektorler/oleokimyasallar/2-octyldodecanol
CAS 5333-42-6 | Formula C20H42O
Synonyms: Octyldodecanol, 2-oktil-1-dodekanol
Cosmetic oil component for alcoholic lotions; Oil phase in O/W and W/O emulsions; Superfatting agent in shampoos and hair care products; Skin care cream and lotion formulations; Sun-care and after-sun products; Component of industrial lubricants and metalworking fluids; Perfumery and fragrance...
- Appearance: Water-white oily liquid alcohol
- iso-C20-OH content: 90 %
- Acid value: 1 mg KOH/g
- Iodine value: 8 g I2/100g
- Colour APHA: 50
Packaging: 170 kg drum, 850 kg IBC container or bulk. Alternative packaging options are available on request. · Shelf life: 24 months (sealed, cool, dry)

### Oleic Acid 75%
https://korkimya.com/sektorler/oleokimyasallar/oleic-acid-75
CAS 112-80-1 | Formula C18H34O2
Synonyms: Oleik Asit ≥%75 (C18:1)
Production of anionic surfactants and detergents; Mining and mineral flotation processes; Metalworking fluid and cutting-oil additives; Industrial lubricant and grease formulations; Paper and textile surface finishing chemicals; Cosmetic emollient and skin care products; Adhesive and plasticiser...
- Product form: Liquid at 9°C
- Acid value: 197 mg KOH/g – 205 mg KOH/g
- Saponification value: 198 mg KOH/g – 207 mg KOH/g
- Iodine value: 90,0 g I2/100g
- Color Lovibond 5¼": max. 10.0Y / 1.0R
Packaging: Supplied in bulk in ISO tank containers. Alternative packaging options are available on request. · Shelf life: 24 months (from the date of manufacture)

### Oleic Acid Ethyl Ester
https://korkimya.com/sektorler/oleokimyasallar/oleic-acid-ethyl-ester
CAS 111-62-6 | Formula C20H38O2
Synonyms: Ethyl (Z)-octadec-9-enoate, Ethylis oleas, Ethyl oleate
Lipophilic solvent in pharmaceutical formulations (steroids, fat-soluble vitamins); Carrier oil in injection preparations; Emollient in cosmetics and skin care products; Production of food flavours and aroma chemicals (Fl. No. 09.192); Perfumery and fragrance formulations; Solubilisation of...
- Appearance: Clear, light yellow or colourless liquid
- Water content: 1,0 %
- Acid value: 0,5 mg KOH/g
- Iodine value: 75 g I2/100g – 90 g I2/100g
- Saponification value: 177 mg KOH/g – 188 mg KOH/g
Packaging: 180 kg drum or bulk. Alternative packaging options are available on request. · Shelf life: 24 months (cool, dark, sealed)

### Palm Kernel Oil (RBD)
https://korkimya.com/sektorler/oleokimyasallar/palm-cekirdegi-yagi-rbd
CAS 8023-79-8
Synonyms: Palm Çekirdeği Yağı, Palm Kernel Oil, RBD Palm Kernel Oil, RBDPKO, Rafine Palm Çekirdek Yağı
Used in food-grade commercial baking and CBS production; raw material for soap, surfactants and fatty acids in oleochemistry…
- Appearance: Light-colored, clear liquid/semi-solid oil
- Free Fatty Acid (as lauric acid), %: 0,1
- Moisture, %: 0,1
- Color (5¼" Lovibond): 1,5 R
- Iodine Value (Wijs): 19
Packaging: Supplied in bulk: road tanker, ISO tank, flexibag or pipeline transfer. Drums are available on request. · Shelf life: 365 days (from the date of manufacture)

## Wax & Paraffin Chemicals

### Candle Wax
https://korkimya.com/sektorler/wax-ve-parafin/candle-wax
CAS 64742-51-4 | Formula CnH2n+2
Candle and decorative candle production (basic raw material) · Impregnation and coating of flexible food packaging · Coating of wood, concrete and metal containers for food storage · Cosmetic product formulations (lipstick, balms) · Medical device and pharmaceutical applications · Mould-release...
- Appearance: White solid mass
- Drop point (°C): 52,0
- Flash point (COC) (°C): 200
- Water content (%): Trace amount
- Sulphur content (mg/kg): 20,0
Packaging: Supplied in granular form on pallets. Alternative packaging options are available on request. · Shelf life: 24 months

### Paraffin Wax Emulsion
https://korkimya.com/sektorler/wax-ve-parafin/paraffin-wax-emulsion
CAS 8002-74-2
Moisture and swelling preventer in MDF, chipboard and wood-composite panel production · Imparts anti-dust property in wood panel manufacturing · Reduces dust emissions during cutting and sanding operations · Wood-fibre and particleboard impregnation · Surface coating and barrier applications for...
- Appearance: White homogeneous milky emulsion
- Solids content (%): 55 – 60
- pH (20°C): 3,5 – 5,5
- Viscosity (20°C) (mPa.s): 20 – 200
- Ion type: Cationic
Packaging: Supplied in bulk in stainless steel tanks or IBC containers. Alternative packaging options are available on request. · Shelf life: 6 months

### Paraffin Wax
https://korkimya.com/sektorler/wax-ve-parafin/paraffin-wax
CAS 8002-74-2 | Formula CnH2n+2
Candle and decorative candle production · Additive for the rubber and plastics industries · Impregnation/coating of paper, cardboard and packaging materials · Auxiliary chemicals for textile, leather and weaving · Wood and metal surface protection applications · Pharmaceutical and cosmetic...
- Appearance: White solid - plate or granules
- Melting point (°C): 52 – 58
- Oil content (%): 0,5
- Penetration (25°C) (×0,1 mm): 13 – 20
- Saybolt colour (82°C): +25
Packaging: Supplied on pallets in slab or granular form. Alternative packaging options are available on request. · Shelf life: 24 months

## Chlorinated Solvents

### Purified Chloroform
https://korkimya.com/sektorler/klorlu-solventler/aritilmis-kloroform
CAS 67-66-3 | UN 1888 | Formula CHCl3
Synonyms: triklorometan, metan triklorür, metil triklorür, metiniltriklorür, metinilklorür
Purified chloroform is used in the production of refrigerants and fluoroplastics, in chemical analysis, as a solvent, in the medical industry, in the production of fragrant substances and in other industrial sectors.
- Density at 20 °C, g/cm3: 1,473-1,490
- Mass fraction of water, %, max.: 0,06
- Mass fraction of acid as hydrochloric acid, %, max.: 0,001
- Mass fraction of total organic chloride impurities, %, max.: 0,025
- Mass fraction of acetaldehyde, %, max.: 0,0005
Packaging: Heavy-walled welded steel drums of 110 and 275 dm3 capacity, corrosion-resistant steel drums of 100 and 250 dm3 capacity, lined steel drums of 216.5 dm3 capacity, dedicated rail tank cars; tank containers. · Shelf life: Product stabilised with amylene: 1 year

### Dikloroetan (Metilen Klorür)
https://korkimya.com/sektorler/klorlu-solventler/dikloroetan-metilen-klorur
UN 1593 | Formula CH2Cl2
Synonyms: diklorometan, metilen klorür, freon 30
Used in the production of chemical fibres, photographic and motion-picture film, plastics, perfumes and rubber technical products; in surface degreasing in metallurgy and the radio industry; as a polyurethane foam solvent in the paint and varnish industry; and in other industrial sectors.
- Appearance: Colourless transparent liquid free of mechanical impurities
- Density at 20 °C, g/cm3: 1,326 - 1,328
- Mass fraction of water, %, max.: 0,01
- Mass fraction of residue after evaporation, %, max.: 0,0005
- Mass fraction of iron, %, max.: 0,0001
Packaging: Rail tank cars and tanker vehicles, steel drums. · Shelf life: Product stabilised with amylene: 1 year from the date of manufacture; for non-stabilised methylene chloride the storage period has not been determined

## Organic Chemicals

### Monochloroacetic Acid (MCA)
https://korkimya.com/sektorler/organik-kimyasallar/monochloroacetic-acid-mca
CAS 79-11-8 | UN 1751 | Formula C2H3ClO2
Monochloroacetic acid (MCA) is a high-purity chemical intermediate in the form of white flakes; it is used in the production of carboxymethyl cellulose, agrochemicals, thioglycolic acid and surfactants.
- Appearance: White flakes
- Monochloroacetic acid (MCA), %: 99,0
- Dichloroacetic acid (DCA), %: 0,5
- Acetic acid, %: 0,3
- Moisture, %: 0,5
Packaging: 25 kg PE bag · 1000 kg big-bag. · Shelf life: 12 months

### Korkamide AP-85
https://korkimya.com/sektorler/organik-kimyasallar/korkamide-ap-85
CAS 7621-86-5
Plasticiser-2 is used to obtain polymers with special characteristics, including fibre-forming polymers used in the production of para-aramid high-strength heat-resistant fibres.
- Appearance: Light beige to beige crystalline powder
- Mass fraction, main substance content on dry basis, %, min.: 99,96
- Melting point, °C, min.: 234,0
- Mass fraction of water, %, max.: 0,20
- Mass fraction of residue after calcination, %, max.: 0,04
Packaging: Cardboard wound drums of up to 50 dm3 capacity, returnable imported polyethylene drums of up to 55 dm3 capacity, polyethylene drums with double-sealed polyethylene inner bags of up to 65 dm3 capacity. · Shelf life: 6 months from the date of manufacture

### Korkamide AP-96
https://korkimya.com/sektorler/organik-kimyasallar/korkamide-ap-96
CAS 7621-86-5
Plasticiser-2 with enhanced performance properties is used to obtain polymers with special characteristics, including fibre-forming polymers used in the production of special para-aramid high-strength heat-resistant fibres.
- Appearance: Light beige to beige crystalline powder
- Mass fraction of plasticiser-2, %, min.: 99,85
- Melting point, °C, min.: 234,0
- Mass fraction of water, %, max.: 0,12
- Mass fraction of residue after calcination, %, max.: 0,03
Packaging: Polyethylene drums with two polyethylene inner bags of up to 65 dm3 capacity. · Shelf life: 12 months from the date of manufacture

### Phenol Synthetic Technical
https://korkimya.com/sektorler/organik-kimyasallar/phenol-synthetic-technical
CAS 108-95-2 | UN 1671 | Formula C6H6O
Key raw material in the manufacture of bisphenol A (BPA); production of phenol-formaldehyde resin (Bakelite, phenolic resin); production of caprolactam and nylon; epoxy resin and laminate manufacture; plastic and polymer synthesis; raw material for detergents and surfactants; industrial chemical...
- Appearance: Colourless to light pink crystalline solid / liquid
- Crystallisation temperature, °C: 40,7
- Water content, %: 0,03
- Non-volatile matter, %: 0,001
- Water solubility (20°C), %: 8,3
Packaging: Steel drum: 200-220 kg; IBC tank: 1000 kg; ISO tank: 20-24 MT; Tanker: 24-26 MT. · Shelf life: 12 months (in original sealed packaging)

## Acrylic Resins

### Methacrylic Acid (MAA)
https://korkimya.com/sektorler/akrilik-recineler/methacrylic-acid-maa
CAS 79-41-4 | UN 2531 | Formula C4H6O2
Methacrylic acid (MAA) is an unsaturated carboxylic acid and polymer monomer; it is used in the production of acrylic resins, coatings, adhesives and superabsorbents.
- Appearance: Colourless clear liquid or crystalline solid
- Purity, %: 99,0
- Moisture, %: 0,05
- Colour (Hazen): 20
- Acid value, mgKOH/g: 645,0 – 655,0
Packaging: Drum or IBC · bulk on request. · Shelf life: 6 months

### Thermoplastic Acrylic Resin
https://korkimya.com/sektorler/akrilik-recineler/termoplastik-akrilik-recine
Formula Tescilli akrilik polimer
Road marking paint binder. Facade and exterior coating formulations. Protective coatings for concrete and masonry surfaces. Wood and slate surface coatings. Artificial stone and decorative surface coatings. Metal surface coatings, including galvanised steel. Paint and varnish industry formulations...
- Appearance: Clear to slightly hazy viscous liquid in xylene
- Viscosity (VZ-246, ø4 mm), s: 100 – 150
- Gardner colour: 2
- Non-volatile matter, %: 48 – 52
- Acid value, mg KOH/g: 15
Packaging: Supplied in drums or IBC containers. Keep containers closed and store in original packaging. · Shelf life: 12 months

## Alkyl Benzenes

### Linear Alkyl Benzene (LAB)
https://korkimya.com/sektorler/alkil-benzenler/linear-alkyl-benzene-lab
CAS 67774-74-7 | Formula C16-20H26-34
Key raw material for the production of linear alkyl benzene sulphonic acid (LABSA) by sulphonation. Synthesis of biodegradable anionic surfactants. Domestic and industrial liquid/powder detergent formulations. Manufacture of laundry detergent and softener active components. Auxiliary chemicals for...
- Appearance — available grades: MARKA A, MARKA B
- Density, 15°C, kg/m³ — available grades: MARKA A, MARKA B
- Density, 20°C, kg/m³ — available grades: MARKA A, MARKA B
- Bromine index, max., mg/100g — available grades: MARKA A, MARKA B
- Sulphonatable matter, min., % — available grades: MARKA A, MARKA B
Packaging: Supplied in bulk via ISO tank containers or road tankers. Packaging options to be agreed upon mutually. · Shelf life: 12 months

## Anhydrides

### Ftalik Anhidrit
https://korkimya.com/sektorler/anhidritler/ftalik-anhidrit
CAS 85-44-9 | Formula C8H4O3
Synonyms: 2-benzofuran-1,3-dione
Plasticiser production (DOP, DINP, etc.). Alkyd resin production. Paint and coating systems. Unsaturated polyester resins. Pigment and dye chemicals. Rubber chemicals. Insulation materials. Chemical intermediate manufacture. Fibreglass resin systems.
- Appearance: White-coloured flakes, powder or molten liquid
- Phthalic anhydride content, %: 99,9
- Crystallisation temperature, °C: 130,9
- Phthalic acid content: Not present
- Maleic anhydride content, %: 0,05
Packaging: PP Bag: 25 kg. Big Bag: 500-1000 kg. Molten Bulk Tank: 20-24 MT. ISO Tank: 20-24 MT. · Shelf life: 12 months

## Aromatic Organic Chemicals

### Teknik Klorobenzen
https://korkimya.com/sektorler/aromatik-organik-kimyasallar/teknik-klorobenzen
CAS 108-90-7 | UN 1134
Used in the manufacture of intermediates, dyestuffs, organosilicon compounds and pesticides.
- Appearance: Colourless transparent liquid free of mechanical impurities
- Density at 20 °C, g/cm3: 1,105-1,108
- Mass fraction of water, %, max.: 0,03
- Mass fraction of chlorobenzene, %, min.: 99,9
- Mass fraction of benzene, %, max.: 0,01
Packaging: Steel drums, rail tank cars. · Shelf life: 24 months from the date of manufacture

## Organic Acids

### 2-Etilhekzanoik Asit
https://korkimya.com/sektorler/organik-asitler/2-etilhekzanoik-asit
CAS 149-57-5 | UN 3082
2-ethylhexanoic acid is used in the production of siccative agents, solvents and organotin compounds; in the preparation of metal salts that act as catalysts in plasticiser production; and for other purposes.
- Appearance: Light yellow to dark brown liquid, purple, green and grey tones are permitted
- Mass fraction of main substance, %, min.: 95,00
- Density, g/cm3: 0,890-0,910
Packaging: 2-ethylhexanoic acid is packed in polyethylene drums and metal-palletised medium-tonnage cube containers. Other packaging that is not inferior in functional properties to the packaging specified above and that ensures cargo integrity during storage and transport is permitted. · Shelf life: 12 months from the date of manufacture

## Plastic Additives

### Liquid Chlorinated Paraffins
https://korkimya.com/sektorler/plastik-katkilari/sivi-klorlu-parafinler
Formula CnH2n+2-xClx
Synonyms: klorparafinler
Liquid chlorinated paraffins are used in diesel fuel, lubricants, lubricating compositions for natural leather processing, polyvinyl chloride-based and other polymer material compositions, and for finishing treatments. XP-52 - in the production of PVC plasticisers for the cable industry; XP-470A1...
- Colour intensity by optical density, max. — available grades: XP-52, XP-250
- Mass fraction of chlorine (Cl), % — available grades: XP-52, XP-250
- Mass fraction of acid as hydrochloric acid, %, max. — available grades: XP-52, XP-250
- Mass fraction of iron, %, max. — available grades: XP-52, XP-250
- Thermal stability as mass fraction of released hydrogen chloride, %, max. — available grades: XP-52, XP-250
Packaging: Special heated-jacket rail tank cars, steel drums, polyethylene drums, customer-owned steel packaging, road tankers, special steel containers. · Shelf life: XP-52 - 12 months; XP-250 - 6 months; XP-418, XP-470 A1, XP-470 A2 - 12 months; XP-470B - 3 months from the date of manufacture

## Guides & Articles

### What is DMAPA and what is it used for?
https://korkimya.com/kaynaklar/aminler/dmapa-nedir-ne-icin-kullanilir
Published: 2026-06-10 | Modified: 2026-06-10
DMAPA (3-dimethylaminopropylamine) is a colorless liquid bifunctional amine carrying both a primary and a tertiary amine group on the same molecule; its most common use is as an intermediate in the synthesis of amphoteric and mild surfactants such as cocamidopropyl betaine (CAPB) found in shampoos and liquid soaps.
DMAPA (3-dimethylaminopropylamine) is a bifunctional amine used to make amphoteric surfactants such as cocamidopropyl betaine. We explain its definition, key applications and safe handling.

### KOH 48% vs 90%: which grade should you choose?
https://korkimya.com/kaynaklar/inorganik-kimyasallar/koh-48-ile-koh-90-arasindaki-fark
Published: 2026-06-10 | Modified: 2026-06-10
KOH 48% and KOH 90% are two commercial forms of the same chemical (potassium hydroxide): 48% is a ready-to-use aqueous solution, while 90% is a solid flake or granule. The choice depends on the trade-off between ease of dosing and water content versus shipping cost: plants that want liquid metering and are not sensitive to freight per active ingredient prefer 48%, while those that want no added water or need to ship a high active concentration over long distances prefer 90%.
KOH 48% is a ready-to-use liquid solution; KOH 90% is a solid flake/granule. The difference spans ease of dosing to shipping cost. We explain which to choose and when.

### Monochloroacetic acid (MCA): uses and handling
https://korkimya.com/kaynaklar/inorganik-kimyasallar/monokloroasetik-asit-mca-kullanim-alanlari
Published: 2026-06-10 | Modified: 2026-06-10
Monochloroacetic acid (MCA, ClCH2COOH) is a crystalline organic acid carrying a reactive chlorine atom on its carbon chain; it is used mainly in the production of carboxymethyl cellulose (CMC), in betaine-type surfactants, in herbicide synthesis and as an alkylation/carboxymethylation agent across many fine chemicals.
Monochloroacetic acid (MCA) is a reactive intermediate used to make carboxymethyl cellulose (CMC), betaines, herbicides and many fine chemicals. We explain its key uses and safe handling.

### What is methacrylic acid (MAA)? Properties and applications
https://korkimya.com/kaynaklar/akrilik-recineler/metakrilik-asit-maa-nedir
Published: 2026-06-10 | Modified: 2026-06-10
Methacrylic acid (MAA, CH2=C(CH3)COOH) is a pungent liquid vinyl monomer carrying both a carboxyl group and a polymerizable double bond; it is used mainly as a comonomer to add reactive carboxyl functionality to acrylic resins and emulsion polymers, to provide crosslinking and adhesion, and to produce ion-exchange resins and specialty coatings.
Methacrylic acid (MAA) is a reactive vinyl monomer used in acrylic resins, emulsion polymers and ion-exchange resins. We explain its properties, key applications and safe handling.

### Fumed Silica (K-200): Thickening, Thixotropy Uses & Dosage
https://korkimya.com/kaynaklar/silikon-kimyasallari/pirojenik-silika-k-200-kullanim-ve-dozaj
Published: 2026-06-10 | Modified: 2026-06-10
Fumed silica (K-200) is used as a thickener and thixotropic agent in liquid systems; typical dosage is 0.5-3% by weight of the total formulation, giving a rheology that flows under shear and rebuilds structure at rest.
Typical dosage ranges and dispersion methods for K-200 hydrophilic fumed silica as a thickener and thixotropic agent in resins, paints, adhesives and filled systems.

### Amine-Based Surfactant Intermediates: DMAPA and C12-14 Alkyldimethylamine
https://korkimya.com/kaynaklar/yuzey-aktif-maddeler/amin-bazli-yuzey-aktif-madde-ara-urunleri
Published: 2026-06-10 | Modified: 2026-06-10
Amine-based surfactant intermediates are the amine building blocks used before the final surfactant (betaines, amine oxides, quaternary ammonium compounds) is made; DMAPA is the intermediate for cocamidopropyl betaine, while C12-14 alkyldimethylamine is the key intermediate for cationic surfactants.
How amine intermediates like DMAPA and C12-14 alkyldimethylamine serve as building blocks for betaine, amine oxide and quaternary ammonium surfactants, with selection criteria.

### What Is Ecosky-3103 Bio-Based Rubber Process Oil?
https://korkimya.com/kaynaklar/termoplastik-polimerler/ecosky-3103-biyobazli-kaucuk-proses-yagi-nedir
Published: 2026-06-10 | Modified: 2026-06-10
Ecosky-3103 is a 100% bio-based, carbon-negative rubber process oil used to improve filler dispersion and processability in rubber compounds; it offers a renewable alternative to petroleum-derived TDAE process oils.
Ecosky-3103 is a 100% bio-based, carbon-negative rubber process oil used as a plasticiser and processing aid in rubber compounds. What it is, why it is used and how it differs from TDAE.

### Hydrocarbon Resins Application Guide: Adhesives, Coatings and Rubber
https://korkimya.com/kaynaklar/termoplastik-polimerler/hidrokarbon-recineleri-uygulama-rehberi
Published: 2026-06-10 | Modified: 2026-06-10
Hydrocarbon resins are petroleum-based low-molecular-weight thermoplastic resins used as tackifiers that provide tack and adhesion in adhesives, as film-forming resins that add hardness and gloss in coatings, and as additives that improve processability and reinforcement in rubber.
An application guide to hydrocarbon resins (C5, C9 and hydrogenated grades) as tackifiers in adhesives, film-formers in coatings and processing/reinforcing additives in rubber.

### Hydrogen Peroxide (H2O2): concentration (30%/50%), uses and supply
https://korkimya.com/kaynaklar/inorganik-kimyasallar/hidrojen-peroksit-kullanim-konsantrasyon-tedarik
Published: 2026-06-22 | Modified: 2026-06-22
Hydrogen peroxide (H2O2) is a powerful oxidizing and bleaching chemical that decomposes into water and oxygen, leaving no persistent residue. In industry it is used most in textile and pulp bleaching, water treatment and disinfection, chemical synthesis and electronics/semiconductor cleaning. It is sold at different concentrations; in the KORKİMYA portfolio it is supplied as a colorless transparent liquid in 30% (~35-40% H2O2 by mass) and 50% (50-55% H2O2 by mass) grades.
What is hydrogen peroxide (H2O2), where are the 30% and 50% grades used, how to choose and how to source it safely? A guide to concentration, uses and supply.

### What is calcium hypochlorite? Uses, granular grades and supply
https://korkimya.com/kaynaklar/inorganik-kimyasallar/kalsiyum-hipoklorit-nedir-kullanim-alanlari
Published: 2026-06-22 | Modified: 2026-06-22
Calcium hypochlorite (Ca(ClO)2) is a white or slightly coloured granular oxidiser and disinfectant that releases a high level of active chlorine when added to water. Its most common uses are swimming pool and drinking-water disinfection; it is also used as an oxidiser in chemical processes and to neutralise cyanide-containing wastewater and waste gases in the gold mining industry.
Calcium hypochlorite (Ca(ClO)2) is a granular oxidiser used from pool and drinking-water disinfection to gold mining. Definition, grades, safety and supply.

### Sodium Hypochlorite: concentration (20%/50%), stability, storage and supply
https://korkimya.com/kaynaklar/inorganik-kimyasallar/sodyum-hipoklorit-konsantrasyon-stabilite-tedarik
Published: 2026-06-22 | Modified: 2026-06-22
Sodium hypochlorite (NaClO), also known as liquid chlorine, is a yellowish-green aqueous oxidiser and disinfectant solution. It is mainly used for drinking water and pool disinfection, industrial water and wastewater treatment, textile and paper bleaching, and as an oxidising reagent in the chemical industry. Commercial solutions are referenced by their active chlorine content (for example 15%, 20% or 50%); the right grade depends on your dosing, logistics and storage setup.
What is sodium hypochlorite (NaClO, liquid chlorine), which concentrations are supplied, how is it stored and handled safely? Active chlorine, 20% vs 50% and supply basics.

### Chloroform (CHCl3): purity, applications and industrial supply
https://korkimya.com/kaynaklar/solventler/kloroform-chcl3-saflik-kullanim-tedarik
Published: 2026-06-22 | Modified: 2026-06-22
Chloroform (CHCl3, trichloromethane) is a colorless, dense, chlorinated solvent. In industry it is used mainly in the production of refrigerants and fluoroplastics, as a solvent in chemical analysis, in medical and pharmaceutical applications, and in the production of fragrant substances. KORKİMYA supplies purified chloroform ex-stock from its Istanbul warehouse, KKDIK-registered and with a Turkish Safety Data Sheet.
Chloroform (CHCl3, trichloromethane) is a colorless, dense chlorinated solvent. We explain its definition, key applications, technical properties and KORKİMYA's ex-stock supply terms.

### Sodium Percarbonate (SPC): applications, active oxygen and supply
https://korkimya.com/kaynaklar/inorganik-kimyasallar/sodyum-perkarbonat-spc-kullanim-tedarik
Published: 2026-06-22 | Modified: 2026-06-22
Sodium percarbonate (SPC, sodium carbonate peroxyhydrate, CAS 15630-89-4) is a solid, white, granular oxidising bleach that breaks down into soda ash and hydrogen peroxide when dissolved in water. The grade supplied by KORKİMYA contains 12.5-13.5% active oxygen and is most often used for bleaching and stain removal in detergent powders and automatic dishwasher detergents, for textile and paper bleaching, and as an oxidising disinfectant in industrial cleaning.
What is sodium percarbonate (SPC), which industries use it, what is its active oxygen content, and how is KKDIK-registered, ex-stock supply arranged? We explain.

### What is diethanolamine (DEA)? Uses and supply
https://korkimya.com/kaynaklar/aminler/dietanolamin-dea-nedir-kullanim-alanlari
Published: 2026-06-22 | Modified: 2026-06-22
Diethanolamine (DEA, CAS 111-42-2, formula C4H11NO2) is a secondary ethanolamine carrying two hydroxyethyl groups on a single nitrogen atom; at room temperature it is a colorless to pale-yellow viscous clear liquid or a white solid. Its most common applications are glyphosate (herbicide) production, the removal of acidic gases from natural gas and flue gases, detergent and personal-care formulations, and metalworking fluids.
Diethanolamine (DEA) is a versatile ethanolamine used in glyphosate production, gas treatment and metalworking fluids. Definition, applications and supply.

### Parafin Wax (Parafin): nedir, kullanım alanları, erime noktası ve tedarik
https://korkimya.com/kaynaklar/wax-ve-parafin/parafin-wax-nedir-kullanim-tedarik
Published: 2026-06-30 | Modified: 2026-06-30
Parafin wax (parafin), petrol rafinasyonundan elde edilen, oda sıcaklığında katı, kokusuz ve genellikle beyaz renkli bir hidrokarbon mumudur. Endüstride en çok mum üretiminde, kağıt/karton ve ambalaj kaplamada, kauçuk ve plastik katkısında, tekstil ve deri emprenyesinde, ahşap/metal yüzey korumada ve kozmetik/eczacılık formülasyonlarında kullanılır. KORKİMYA portföyünde iki ana form bulunur: katı parafin mumu (Paraffin Wax, CAS 8002-74-2; erime noktası 52-58°C) ve suda dağılmış parafin emülsiyonu (Paraffin Wax Emulsion, CAS 8002-74-2).
Parafin wax (parafin) nedir, nerede kullanılır, erime noktası kaç derecedir ve nasıl tedarik edilir? Parafin mumu ve parafin emülsiyonu için kullanım ve tedarik rehberi.

### Ftalik Anhidrit (PA): nedir, kullanım alanları ve tedarik
https://korkimya.com/kaynaklar/anhidritler/ftalik-anhidrit-nedir-kullanim-tedarik
Published: 2026-06-30 | Modified: 2026-06-30
Ftalik anhidrit (phthalic anhydride, PA), formülü C8H4O3 ve CAS numarası 85-44-9 olan, beyaz renkli pul, toz veya ergimiş sıvı halinde tedarik edilen aromatik bir anhidrittir. Endüstride en çok ftalat plastikleştiricilerin (DOP, DINP vb.), alkid reçinelerin, doymamış polyester reçinelerin (UPR), boya ve coating sistemlerinin ve pigment/boya kimyasallarının üretiminde bir temel hammadde ve kimyasal ara ürün olarak kullanılır. KORKİMYA portföyünde endüstriyel saflıkta (min %99,9) ftalik anhidrit; PP torba, big bag, ergitilmiş bulk tank ve ISO tank seçenekleriyle sunulur.
Ftalik anhidrit (phthalic anhydride, PA) nedir, plastikleştirici, alkid ve doymamış polyester reçine üretiminde nerede kullanılır, teknik özellikleri nelerdir ve nasıl güvenle tedarik edilir? Kullanım ve tedarik rehberi.

### C16-18 Yağlı Alkol Etoksilat (12EO): noniyonik yüzey aktif madde, kullanım ve tedarik
https://korkimya.com/kaynaklar/yuzey-aktif-maddeler/yagli-alkol-etoksilat-c16-18-12eo-nedir-kullanim-tedarik
Published: 2026-06-30 | Modified: 2026-06-30
C16-18 yağlı alkol etoksilat 12EO (INCI adıyla Ceteareth-12, CAS 68439-49-6), setil-stearil (C16-C18) yağ alkollerinin ortalama 12 mol etilen oksit ile etoksillenmesiyle elde edilen noniyonik bir yüzey aktif maddedir. İyon taşımayan yapısı sayesinde sert suya ve elektrolitlere toleranslıdır; başlıca emülgatör, ıslatıcı ve dispersan olarak çalışır. KORKİMYA portföyünde katı formda sunulur ve en çok kozmetik O/W (yağ-içinde-su) emülsiyonlarında birincil emülgatör olarak; ayrıca saç ve cilt bakımı, güneş koruyucu emülsiyonlar, tekstil/deri terbiyesi ve endüstriyel emülsiyon-dispersiyon...
C16-18 yağlı alkol etoksilat 12EO (Ceteareth-12) nedir, noniyonik yüzey aktif madde nasıl çalışır, nerede emülgatör/ıslatıcı olarak kullanılır ve nasıl tedarik edilir? Teknik özellik ve tedarik rehberi.

### DMEA (Dimetiletanolamin): nedir, kullanım alanları ve tedarik
https://korkimya.com/kaynaklar/aminler/dmea-dimetiletanolamin-nedir-kullanim-tedarik
Published: 2026-06-30 | Modified: 2026-06-30
DMEA (dimetiletanolamin), aynı molekülde hem tersiyer amin hem de hidroksil grubu taşıyan çok yönlü bir tersiyer amino alkoldür. Endüstride en çok su bazlı boya, vernik ve metalik pigmentli kaplama sistemlerinde pH nötralizasyonu ve stabilizasyon için, ayrıca poliüretan katalizörü, epoksi sertleştirici, korozyon inhibitörü / kazan suyu katkısı, gaz arıtmada CO2 ve H2S absorbanı ve farmasötik sentez ara maddesi olarak kullanılır. KORKİMYA portföyünde renksizden açık sarıya berrak yağımsı sıvı (CAS 108-01-0, formül C4H11NO) olarak, minimum %99,7 saflıkta tedarik edilir.
DMEA (dimetiletanolamin, N,N-dimetiletanolamin) nedir, nerelerde kullanılır ve nasıl güvenle tedarik edilir? Tersiyer amino alkolün kullanım, teknik özellik ve tedarik rehberi.

### Termoplastik Yol Çizgi Boyasında Hidrokarbon Reçine: C9 ve C5-C9 Rehberi
https://korkimya.com/kaynaklar/termoplastik-polimerler/termoplastik-yol-cizgi-boyasi-hidrokarbon-recine
Published: 2026-07-03 | Modified: 2026-07-03
Termoplastik yol çizgi boyasında hidrokarbon reçinesi, eriyik haldeki karışımı bir arada tutan ve yol yüzeyine yapışmayı sağlayan bağlayıcı reçine görevini üstlenir. Isıyla eritilerek uygulanan bu boyalarda reçine; pigmenti, dolguyu ve cam boncukları tek bir film içinde birleştirir, çizginin sertliğini ve ısıl kararlılığını belirler. Bu amaçla en yaygın tercih edilen bağlayıcılar C9 hidrokarbon reçine ile C5-C9 kopolimer hidrokarbon reçinedir. KORKİMYA, yol markalama üreticilerine 75-145 °C yumuşama noktalı C9 Hidrokarbon Reçine ve 85-120 °C yumuşama noktalı C5-C9 Hidrokarbon Reçine...
Termoplastik yol çizgi boyasında bağlayıcı reçine olarak kullanılan C9 ve C5-C9 hidrokarbon reçinelerin rolü, teknik özellikleri ve seçim kriterleri. Yol markalama üreticileri için tedarik, ambalaj ve numune süreçlerini de kapsayan rehber.

### Baskı mürekkeplerinde hidrokarbon reçine: C9 aromatik reçinenin rolü ve seçimi
https://korkimya.com/kaynaklar/termoplastik-polimerler/baski-murekkeplerinde-hidrokarbon-recine
Published: 2026-07-03 | Modified: 2026-07-03
Baskı mürekkebinde hidrokarbon reçine, film oluşturucu ve bağlayıcı reçine olarak görev yapar: çözünürlüğü destekler, pigmenti ıslatır, baskı filminin parlaklığını (gloss) yükseltir ve filmin sertlik ile yapışmasını iyileştirir. Özellikle C9 aromatik hidrokarbon reçine, aromatik yapısı sayesinde aromatik çözücü ve bağlayıcı sistemlerle uyumludur; bu nedenle gravür ve heatset ofset mürekkeplerinin reçine sistemlerinde kullanılır. KORKİMYA'nın C9 Hidrokarbon Reçinesi (CAS 68131-77-1), 75-145 °C yumuşama noktası aralığı ve 5-8 Gardner renk değeriyle baskı mürekkebi ve kaplama formülasyonları...
Gravür ve ofset mürekkeplerinde hidrokarbon reçine ne işe yarar? C9 aromatik reçinenin parlaklık, pigment ıslatma ve film performansına katkısı ile teknik özellik ve tedarik rehberi.

### Kauçuk ve lastikte hidrokarbon reçine: tackifier ve takviye rolü
https://korkimya.com/kaynaklar/termoplastik-polimerler/kaucuk-lastikte-hidrokarbon-recine-takviye
Published: 2026-07-03 | Modified: 2026-07-03
Kauçuk ve lastik bileşimlerinde hidrokarbon reçineler öncelikle yapışkanlaştırıcı (tackifier) olarak görev yapar: ham kauçuğun kendine ve diğer yüzeylere yapışkanlığını (building tack) artırarak katmanların vulkanizasyon öncesinde güvenle birleşmesini sağlar. Aynı zamanda dolgu dağılımını iyileştirir, karışımın işlenebilirliğini kolaylaştırır ve vulkanizatın sertlik/takviye profiline katkı sunar. C9 aromatik hidrokarbon reçineler, doğal ve sentetik kauçuklarla gösterdikleri iyi uyum sayesinde lastik ve teknik kauçuk üretiminde yaygın tercih edilir. KORKİMYA, kauçuk ve elastomer bileşimlerine...
Kauçuk ve lastik bileşimlerinde hidrokarbon reçinesi (C9 aromatik) tackifier ve işleme reçinesi olarak ne işe yarar? Building tack, işlenebilirlik, teknik özellikler, C9 - C5-C9 karşılaştırması ve tedarik rehberi.

### Sıcak Eriyik ve PSA Yapıştırıcılarda Hidrokarbon Reçinenin Tackifier Rolü
https://korkimya.com/kaynaklar/termoplastik-polimerler/sicak-eriyik-yapistiricida-hidrokarbon-recine-tackifier
Published: 2026-07-03 | Modified: 2026-07-03
Sıcak eriyik (hot-melt, HMA) ve basınca duyarlı (PSA) yapıştırıcılarda tackifier reçine, formülasyona tack (ilk yapışkanlık) ve yapışma dayanımı kazandıran bileşendir. Baz polimer tek başına yeterli ilk yapışkanlığı göstermez; hidrokarbon reçinesi polimer matrisine katılarak yapıştırıcının yüzeye ilk temasta tutunmasını ve kalıcı bağ oluşturmasını sağlar. Reçine seçimi polimerle uyumluluk, yumuşama noktası ve renk esasına göre yapılır; açık renk gerektiğinde düşük Gardner değerli reçine tercih edilir. KORKİMYA, HMA ve PSA üreticileri için yumuşama noktası 85-120 °C ve Gardner 1-7 renk...
Hot-melt (HMA) ve basınca duyarlı (PSA) yapıştırıcı formülasyonlarında hidrokarbon reçinesinin tackifier olarak işlevi: reçine seçim kriterleri, C5-C9 ve C9 reçinelerin teknik özellikleri ve tedarik koşulları.

### Hidrokarbon Reçine Seçim Rehberi: C9 mu, C5 mi, C5-C9 mu?
https://korkimya.com/kaynaklar/termoplastik-polimerler/hidrokarbon-recine-secim-rehberi
Published: 2026-07-03 | Modified: 2026-07-03
Hidrokarbon reçine seçimi dört kritere dayanır: yumuşama noktası, renk (Gardner), polimer uyumluluğu ve hedef uygulama. Açık renk ve güçlü tack isteyen sıcak eriyik (HMA) ve basınca duyarlı (PSA) yapıştırıcılarda C5 veya C5-C9, sertlik ve yüksek yumuşama noktası isteyen kaplama, mürekkep ve kauçuk işlerinde C9, renk ve koku hassasiyeti en üst düzeyde olan işlerde hidrojene reçine tercih edilir. Tek reçineyle geniş bir uygulama yelpazesi kapatmak isteyenler için C5-C9 kopolimer en dengeli başlangıçtır. KORKİMYA portföyünde C9 ve C5-C9 hidrokarbon reçineler bulunur; uygulamanızı paylaşarak...
C9 aromatik, C5 alifatik, C5-C9 kopolimer ve hidrojene hidrokarbon reçineler arasında seçim yapan formülatör ve satın almacılar için karar rehberi: yumuşama noktası, Gardner renk, polimer uyumluluğu ve uygulama bazlı öneriler.

### C9 hidrokarbon reçine tedariki: ambalaj, numune ve teklif süreci
https://korkimya.com/kaynaklar/termoplastik-polimerler/c9-hidrokarbon-recine-tedarik-numune
Published: 2026-07-03 | Modified: 2026-07-03
C9 hidrokarbon reçine (CAS 68131-77-1) tedariki için KORKİMYA'ya iletişim formu üzerinden talep oluşturmanız yeterlidir: ürün İstanbul deposunda stoklu tutulur ve stoktan teslim edilir. Ambalaj seçenekleri 25 kg kraft torba ve 500-1000 kg big bag'dir; talep üzerine dolu varil ile de sevkiyat yapılır. Formülasyon denemeleri için ücretsiz numune gönderilir; fiyat ve teklif, kullanım alanı ve miktar bilgisiyle birlikte aynı formdan talep edilir. Ürün KKDIK kapsamında kayıtlıdır, Türkçe GBF (Güvenlik Bilgi Formu) sağlanır ve fatura TL olarak kesilir.
C9 hidrokarbon reçineyi KORKİMYA'dan nasıl tedarik edersiniz? Ambalaj seçenekleri, İstanbul deposundan stoktan teslim, ücretsiz numune, teklif alma ve Türkçe GBF: satın alma sürecinin tamamı bu rehberde.

### How to choose an Ethyl Silicate-40 supplier (foundry and refractory sourcing guide)
https://korkimya.com/kaynaklar/silikon-kimyasallari/etil-silikat-40-tedarikci-secimi
Published: 2026-07-22 | Modified: 2026-07-22
When choosing an Ethyl Silicate-40 (ETS-40 / TEOS) supplier, compare five criteria: lot-to-lot specification consistency with a certificate of analysis (CoA) per lot, KKDIK registration with a Turkish Safety Data Sheet (SDS), local stock versus an 8-12 week import lead time, sample verification before the purchase order, and TRY payment terms. KORKİMYA meets all five ex-stock.
How do you choose the right supplier for Ethyl Silicate-40 (ETS-40 / TEOS), the investment-casting and refractory binder? We explain specification consistency, KKDIK registration, local stock, sample and CoA verification and TRY payment terms against KORKİMYA's supply conditions.

### How to choose a DMAPA supplier: a guide for betaine producers
https://korkimya.com/kaynaklar/yuzey-aktif-maddeler/dmapa-tedarikci-secimi
Published: 2026-07-22 | Modified: 2026-07-22
When choosing a DMAPA supplier, weigh five criteria: amine purity and batch-to-batch spec consistency via CoA, KKDIK registration and a Turkish SDS, local stock versus import lead time, a sample that validates betainization performance, and TRY payment terms. KORKİMYA supplies DMAPA at a minimum 99.5% purity, KKDIK-registered, ex-stock from local inventory.
A supplier-selection guide to DMAPA for cocamidopropyl betaine (CAPB) and amphoteric surfactant producers: amine purity and spec consistency, KKDIK and Turkish SDS, local stock versus import, sample validation and TRY payment terms.

### How to choose a K-200 (fumed silica) supplier: a buying guide for pyrogenic silica
https://korkimya.com/kaynaklar/silikon-kimyasallari/k-200-fumed-silika-tedarikci-secimi
Published: 2026-07-22 | Modified: 2026-07-22
When choosing a fumed (pyrogenic) silica supplier, check six criteria: verify BET surface area and specification consistency via a CoA, select the hydrophilic grade that fits your application, ask for KKDIK registration and a Turkish SDS, compare local stock against import lead time, request a sample to validate rheology performance, and clarify TRY invoicing and payment terms.
When choosing a fumed (pyrogenic) silica supplier, we explain how to evaluate BET surface-area and specification consistency, hydrophilic grade fit, KKDIK registration and Turkish SDS, local stock versus import lead time, samples and TRY terms.

### How to choose a KOH 90% supplier: a guide for soap, biodiesel and fertilizer buyers
https://korkimya.com/kaynaklar/inorganik-kimyasallar/koh-90-tedarikci-secimi
Published: 2026-07-22 | Modified: 2026-07-22
When choosing a KOH 90% supplier, check five criteria: consistent assay verified per batch by a certificate of analysis (CoA, min 90%), a grade that fits your application (soap saponification, biodiesel catalyst, potassium fertilizer), KKDIK registration and a Turkish Safety Data Sheet, local stock versus long import lead times, sample availability, and TRY-based payment terms. KORKİMYA meets these from Istanbul stock.
We explain how to evaluate a potassium hydroxide (KOH 90%) supplier on assay consistency, grade fit, KKDIK registration, local stock and sampling, and how KORKİMYA meets these criteria.

### Chemical raw-material sourcing: import or local stock? A decision guide for manufacturers
https://korkimya.com/kaynaklar/hammadde-tedarik/kimyasal-hammadde-tedarik-rehberi
Published: 2026-07-22 | Modified: 2026-07-22
The import-vs-local-stock decision for chemical raw materials is not made on unit price, but on total landed cost, lead-time risk, FX exposure, compliance documents such as KKDIK and the SDS, and sampling. Local stock wins where lead times are long and unpredictable; direct import can win on a one-off, high-volume buy chasing a fixed unit cost. For most manufacturers the right answer is a second-source strategy that combines both.
Import channel or local-stock supplier for chemical raw materials? A decision framework based on total landed cost, lead time, FX and KKDIK compliance, plus a supplier evaluation checklist and a second-source strategy.

### Hydrogen peroxide 30% or 50%? Which concentration should you choose
https://korkimya.com/kaynaklar/inorganik-kimyasallar/hidrojen-peroksit-30-vs-50-hangi-konsantrasyon
Published: 2026-07-22 | Modified: 2026-07-22
For textile/paper bleaching, water treatment and disinfection the choice follows your application dose: if you dilute on site and dose at low concentration, the 50% grade is more economical per unit of active substance for shipping and storage; if you want ready dosing and relatively easier handling, the 30% grade fits. In the KORKİMYA portfolio it comes in 30% (~35-40% H2O2 by mass) and 50% (50-55% H2O2 by mass) grades.
Hydrogen peroxide 30% or 50% for textile and pulp bleaching, water treatment and disinfection? A guide to choosing the right concentration by dilution economics, handling and application dose.

### Sodium hypochlorite 20% or 50%? Active chlorine, stability and freight economics
https://korkimya.com/kaynaklar/inorganik-kimyasallar/sodyum-hipoklorit-20-vs-50-hangi-konsantrasyon
Published: 2026-07-22 | Modified: 2026-07-22
Choosing between 20% and 50% sodium hypochlorite (NaClO) rests on three levers: active chlorine per litre (dosing and freight economics), free-alkali buffering (decay rate and storage life) and the clarity/handling of the solution. The critical point: in the KORKİMYA portfolio the '20%' and '50%' in the grade name refer to the light transmittance coefficient, not to chlorine strength. Per the product data, the 20% grade actually carries higher active chlorine (min. 190 g/dm³); the 50% grade has active chlorine of min. 170 g/dm³ but higher free alkali (20-30 g/dm³). So water treatment and...
Choosing between 20% and 50% sodium hypochlorite (NaClO) depends on active chlorine per litre, free-alkali buffering and freight economics. A decision rule for water treatment, sanitation and textile buyers.

### What is TOFA 185 and how is it used in alkyd resin production?
https://korkimya.com/kaynaklar/bio-bazli-urunler/tofa-185-nedir-alkid-recine-uretiminde-kullanimi
Published: 2026-07-17 | Modified: 2026-07-17
TOFA 185 (Tall Oil Fatty Acids 185) is a high-purity tall oil fatty acid obtained by distilling crude tall oil, a by-product of cellulose (pulp) production; with a min. acid value of 185 mg KOH/g, max. 2% rosin acid, max. 4% unsaponifiables and a light yellow–amber color, it is a bio-based, oleic/linoleic-rich feedstock preferred for color-sensitive alkyd resins, inks and dimer acid derivatives.
TOFA 185 (Tall Oil Fatty Acids 185) is a high-purity tall oil fatty acid with a min. acid value of 185 mg KOH/g, max. 2% rosin acid and a light yellow–amber color. We explain its role in alkyd resin chemistry and why low color and high purity matter.

### TOFA 185 vs TOFA 180: which tall oil fatty acid grade should you choose?
https://korkimya.com/kaynaklar/bio-bazli-urunler/tofa-185-vs-tofa-180-hangi-tall-oil-fatty-acid-gradi
Published: 2026-07-17 | Modified: 2026-07-17
TOFA 185 and TOFA 180 are two refinement grades of the same raw material (tall oil fatty acids): TOFA 185 is higher in purity, offering a min. acid value of 185, max. 2% rosin acid and max. 4% unsaponifiables with a lighter (light yellow–amber) color; TOFA 180 has a min. acid value of 180, max. 3% rosin acid and max. 6% unsaponifiables and is intended for more economical, rosin-tolerant applications. Choose 185 for color-sensitive alkyd resins, inks and dimer acid; choose 180 for rosin-tolerant uses such as flotation, asphalt, soap and rubber.
TOFA 185 offers higher purity, lighter color and lower rosin acid (max. 2%); TOFA 180 is more economical for rosin-tolerant applications. We compare the specifications and selection criteria of the two grades.

### TOFA 185 in dimer acid and polyamide production
https://korkimya.com/kaynaklar/bio-bazli-urunler/tofa-185-ile-dimer-asit-ve-poliamit-uretimi
Published: 2026-07-17 | Modified: 2026-07-17
TOFA 185 is the main feedstock for dimer acid production thanks to the high unsaturation represented by its min. iodine value of 150: two unsaturated C18 fatty acid molecules join catalytically through their double bonds (dimerize) to form a C36 dicarboxylic acid, i.e. dimer acid. Dimer acid is then polycondensed with a diamine to make polyamide resins and hot-melt adhesives; the low rosin acid and low unsaponifiable content of TOFA 185 yield a lighter-colored, more consistent dimer acid.
The unsaturation of TOFA 185 (min. iodine value 150) lets two fatty acid molecules join into dimer acid, which in turn is the building block of polyamide resins and hot-melt adhesives. We explain this chain and why the purity of TOFA 185 matters.

### What is TOFA 180 and why is it preferred in mining flotation?
https://korkimya.com/kaynaklar/bio-bazli-urunler/tofa-180-nedir-flotasyon-toplayici
Published: 2026-07-17 | Modified: 2026-07-17
TOFA 180 (Tall Oil Fatty Acids 180) is an amber to dark-amber fatty-acid feedstock derived from tall oil with an acid value of at least 180 mg KOH/g; in mining flotation it is used, after saponification with an alkali, as an anionic collector that adsorbs onto the surface of non-sulfide ores such as oxides, carbonates and phosphates. Its high tolerance for rosin (resin acid, max. 3%) and unsaponifiables (max. 6%) together with its low cost make it an economical collector choice in many flotation circuits.
TOFA 180 (Tall Oil Fatty Acids 180) is a fatty-acid feedstock with an acid value of min. 180 mg KOH/g and a high tolerance for rosin and unsaponifiables. We explain how it works as an anionic collector in flotation and why it is an economical choice.

### Bitumen/asphalt modification and road emulsifiers with TOFA 180
https://korkimya.com/kaynaklar/bio-bazli-urunler/tofa-180-bitum-asfalt-modifikasyon-emulgator
Published: 2026-07-17 | Modified: 2026-07-17
TOFA 180 (Tall Oil Fatty Acids 180) is a fatty-acid feedstock used in bitumen/asphalt applications for two core functions: it is an intermediate in the production of anti-stripping additives that improve adhesion between bitumen and mineral aggregate, and of emulsifiers that keep droplets stable in bitumen emulsions. Being an economical feedstock with a high tolerance for rosin and unsaponifiables makes it a preferred choice in both hot- and cold-mix road technologies.
TOFA 180 is a fatty-acid feedstock used to make asphalt anti-stripping agents and bitumen-emulsion emulsifiers. We explain its role in hot- and cold-mix road applications.

### Industrial soap and metal cutting fluids with TOFA 180
https://korkimya.com/kaynaklar/bio-bazli-urunler/tofa-180-endustriyel-sabun-metal-kesme-sivilari
Published: 2026-07-17 | Modified: 2026-07-17
TOFA 180 (Tall Oil Fatty Acids 180) is a fatty-acid feedstock that, when saponified with an alkali such as potassium or sodium hydroxide, forms industrial soap; these soaps are used both in cleaning formulations and in metal-working/cutting fluids as a lubricating, emulsifying and corrosion-inhibiting component. Being economical with a high tolerance for rosin and unsaponifiables makes it a suitable feedstock for these cost-sensitive applications.
Saponified with an alkali, TOFA 180 is used in industrial soap production and as a lubricating, emulsifying and corrosion-inhibiting component in metalworking/cutting fluids. We explain saponification, emulsion and dilution.

### Ecosky-3103 vs TDAE: carbon footprint and performance comparison
https://korkimya.com/kaynaklar/bio-bazli-urunler/ecosky-3103-tdae-karbon-ayak-izi-performans-karsilastirmasi
Published: 2026-07-17 | Modified: 2026-07-17
Ecosky-3103 and TDAE do the same job in a rubber compound: TDAE is an aromatic-extract by-product of petroleum refining, while Ecosky-3103 is a 100% bio-based oil made from tall oil derivatives. Technically, Ecosky-3103 is a drop-in replacement for TDAE; the biggest difference is carbon footprint: per the producer declaration Ecosky-3103 is -1771.1 kg CO2/tonne (carbon-negative) whereas TDAE carries roughly +2900 kg CO2/tonne. So the compound's carbon burden drops sharply with no change in function.
Ecosky-3103 is a carbon-negative rubber process oil made from tall oil derivatives and a drop-in replacement for TDAE. We compare the two on carbon footprint, bio-based content, REACH/EUDR status and technical equivalence.

### Ecosky-3103 dosage and formulation guide for rubber compounds
https://korkimya.com/kaynaklar/bio-bazli-urunler/ecosky-3103-lastik-bilesikleri-dozaj-formulasyon-rehberi
Published: 2026-07-17 | Modified: 2026-07-17
Ecosky-3103 is typically used at 20-60 phr (parts per hundred rubber) as an extender oil and plasticiser in tyre and technical rubber compounds. You can start at the same phr as the TDAE/MES oil it replaces, then fine-tune by verifying mix viscosity, filler (carbon black/silica) dispersion and cure time. R&D validation is recommended for each formulation.
Practical dosage (phr) ranges, carbon black/silica dispersion, viscosity effect and cure notes for using Ecosky-3103 as an extender oil and plasticiser in tyre and technical rubber compounds.

### Ecosky-3103 and EUDR/REACH compliance: sustainable rubber sourcing
https://korkimya.com/kaynaklar/bio-bazli-urunler/ecosky-3103-eudr-reach-uyumu-surdurulebilir-kaucuk-tedariki
Published: 2026-07-17 | Modified: 2026-07-17
Ecosky-3103 is a 100% bio-based rubber process oil made from tall oil derivatives, the forest-derived by-product of kraft paper production. It is REACH-registered for the EU market and falls outside the scope of the EU Deforestation Regulation (EUDR), because its feedstock comes not as a product of forests but as a side stream of existing pulp production. This structure gives tyre and rubber manufacturers a tangible decarbonisation tool without competing with the food chain for resources.
Ecosky-3103 is a REACH-registered, out-of-EUDR-scope rubber process oil made from tall oil derivatives. We explain the forest by-product feedstock, the EUDR out-of-scope rationale, REACH registration and the decarbonisation narrative.

### Tall oil value chain: from CTO to TOFA and process oil
https://korkimya.com/kaynaklar/bio-bazli-urunler/tall-oil-deger-zinciri-cto-tofa-proses-yagi
Published: 2026-07-17 | Modified: 2026-07-17
The tall oil value chain starts from crude tall oil (CTO), the forest-derived by-product of kraft (sulphate) pulp production. CTO is separated by fractional distillation into fatty acids (TOFA), rosin (tall oil rosin), distilled tall oil (DTO), the distillation residue pitch (tall oil pitch) and further derivatives (such as bio-based process oil). A single renewable by-product thus gives rise to a product family spanning mining to tyres, paint to asphalt.
The tall oil value chain starts from crude tall oil (CTO) and, through distillation, splits into TOFA, distilled tall oil (DTO), rosin, pitch and bio-based process oil. This guide maps the whole chain and links every product from a sourcing perspective.