LDPE Film Grade FC 08-13
CAS 9002-88-4
Generic registry number (not stated in the manufacturer TDS)
LDPE with increased density
- MFR (190 °C, 2.16 kg)
- Typical: 0.8 g/10 min
- Density (23 °C) [1]
- Typical: 929 kg/m³
- Tensile stress at break (MD/TD) [7]
- Typical: 28 / 25 MPa
- Tensile strain at break (MD/TD) [7]
- Typical: 550 / 650 %
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| MFR (190 °C, 2.16 kg) | Typical: 0.8 g/10 min | ISO 1133-1 · °C |
| Density (23 °C) [1] | Typical: 929 kg/m³ | ISO 1183-1 · °C |
| Tensile stress at break (MD/TD) [7] | Typical: 28 / 25 MPa | ISO 527-1,3 |
| Tensile strain at break (MD/TD) [7] | Typical: 550 / 650 % | ISO 527-1,3 · % |
| Dart drop [7] | Typical: 120 g | ISO 7765-1 method A |
| Haze [7] | Typical: 5 % | ASTM D1003 · % |
| Vicat softening temperature [2] | Typical: 103 °C | ISO 306/A 50 · °C |
| Recommended film thickness | Typical: 0.025 – 0.08 mm | |
| Recommended processing temperature | Typical: 170 – 220 °C | °C |
Detailed application areas
Bags & pouches, blown films, shrink films and surface protection films; blow moulding products. Suitable for conventional extrusion machines. Suitability and final article regulatory compliance must be assessed by user tests.
Packaging & storage
Storage
Avoid UV and >40 °C; dry before use if condensation occurs.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
LDPE Film Grade FC 08-13 (CAS 9002-88-4) is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; MFR (190 °C, 2.16 kg): Typical: 0.8 g/10 min; Density (23 °C) [1]: Typical: 929 kg/m³.
LDPE with increased density
- CAS
- 9002-88-4
- TN-VED Code
- 3901 10
- Category
- Thermoplastic Polymers
Test Methods
ISO 1133-1 · ISO 1183-1 · ISO 527-1,3 · ISO 7765-1 method A · ASTM D1003 · ISO 306/A 50
Key features
Why this product?
- Combustible; observe fire safety rules. [1] Density: pressed specimen, internal method. [2] ISO 294-1 standard injection moulded specimen. [7] Film: 50 µm, melt 180 °C, blow-up ratio 2.5:1.
- 25 kg PE bags; shrink- or stretch-wrapped pallets, 1375 kg polymer. Road or rail silo transport also available.
- Increased-density LDPE (MD LDPE); high rigidity, good optical properties and chemical resistance; additives-free.
- Bags/pouches, blown, shrink and surface-protection films; blow-moulding products.
- Recommendations are not guarantees; user must test suitability and final-article regulatory compliance (e.g. food contact).
- Product compliance: see DDS.
- Protect from UV and >40 °C.
- High humidity/temperature changes may cause condensation in packaging; dry if present.
- Recyclable by modern methods; keep in-house waste clean for direct recycling.
- 25 kg PE bags; shrink/stretch pallets, 1375 kg polymer.
- Road/rail silo transport available.
- Heat-treated pooling pallets remain provider property; collected after use for reuse.
- Polymers are registration-exempt; monomers/relevant additives registered.
- Only REACH-compliant raw materials used.
- No identified SVHC >0.1% at publication.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com