LDPE Film Grade FC 243-51
CAS 9002-88-4
Generic registry number (not stated in the manufacturer TDS)
Low density polyethylene
- Melt mass-flow rate
- Typical: 2 g/10 min
- Density (23 °C) [3]
- Typical: 922 kg/m³
- Tensile stress at break (MD/TD) [11]
- Typical: 24 / 19 MPa
- Tensile strain at break (MD/TD) [11]
- Typical: 340 / 600 %
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| Melt mass-flow rate | Typical: 2 g/10 min | ISO 1133-1 · g/10 min |
| Density (23 °C) [3] | Typical: 922 kg/m³ | ISO 1183-2 · °C |
| Tensile stress at break (MD/TD) [11] | Typical: 24 / 19 MPa | ISO 527-1,3 |
| Tensile strain at break (MD/TD) [11] | Typical: 340 / 600 % | ISO 527-1,3 · % |
| Dart drop [11] | Typical: 92 g | ISO 7765-1 method A |
| Haze [11] | Typical: 10 % | ISO 14782 · % |
| Vicat softening temperature [3] | Typical: 94 °C | ISO 306/A 120 · °C |
| Melting temperature | Typical: 112 °C | ISO 11357-3 · °C |
| Crystallization temperature | Typical: 97 °C | ISO 11357-3 · °C |
| Recommended film thickness | Typical: 0.02 - 0.1 mm | |
| Recommended processing temperature | Typical: 160 - 200 °C | °C |
Detailed application areas
Recommended for general purpose films, bubble films and foamed sheets; not a guarantee. Users must test suitability and regulatory compliance, including food contact. For conventional extrusion machines.
Packaging & storage
Packaging
25 kg PE bags; shrink/stretch-wrapped pallets, 1375 kg polymer. Road or rail silo transport also available.
Storage
Protect from UV and temperatures above 40 °C. Dry pellets before use if condensation occurs.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
LDPE Film Grade FC 243-51 (CAS 9002-88-4) is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; Melt mass-flow rate: Typical: 2 g/10 min; Density (23 °C) [3]: Typical: 922 kg/m³. KORKİMYA supplies LDPE Film Grade FC 243-51 in 25 kg PE bags; shrink/stretch-wrapped pallets, 1375 kg polymer. Road or rail silo transport also available..
Low density polyethylene
- CAS
- 9002-88-4
- TN-VED Code
- 3901 10
- Category
- Thermoplastic Polymers
Test Methods
ISO 1133-1 · ISO 1183-2 · ISO 527-1,3 · ISO 7765-1 method A · ISO 14782 · ISO 306/A 120 · ISO 11357-3
Key features
Why this product?
- Combustible; observe fire safety rules. Lift adhered bags without rotation first. [3] ISO 293 pressed specimens; ISO 291, room temperature. [11] MD/TD film: 0.07 mm for MFR=0.3, 0.04 mm for MFR>0.3; blow-up ratio 2:1 (MFR: g/10 min).
- [3] Standard pressed specimens (ISO 293), conditioned at room temperature (ISO 291).
- [11] Properties on film in M.D./T.D.; thickness 0.07 mm (MFR=0.3 g/10min), 0.04 mm (MFR more than 0.3 g/10min); blow up ratio 2:1.
- Good molten stability, excellent processability and good film mechanics; no additives.
- Heat-treated pallets are pooled for collection/reuse and remain provider property.
- REACH: polymer registration exempt; monomers/relevant additives registered, raw materials compliant.
- No SVHC >0.1% at source revision.
- Compliance: DDS; safety: MSDS.
- Modern recycling methods; keep in-house waste clean for direct recycling.
- Film grade LDPE with good molten stability and excellent processability; films have good mechanical properties.
- Does not contain any additives.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com