Korkamide AP-96
| Parameter | Value |
|---|---|
| Appearance | Light beige to beige crystalline powder |
| Mass fraction of plasticiser-2, %, min. | min 99,85 |
| Melting point, °C, min. | min 234,0 |
| Mass fraction of water, %, max. | maks 0,12 |
| Mass fraction of residue after calcination, %, max. | maks 0,03 |
| Colour intensity in hydrochloric acid solution at 0,5 mol/dm3 molar concentration, colour unit, max. | maks 3,0 |
| Mass fraction of impurities insoluble in hydrochloric acid solution, %, max. | maks 0,10 |
Plasticiser-2 with enhanced performance properties is used to obtain polymers with special characteristics, including fibre-forming polymers used in the production of special para-aramid high-strength heat-resistant fibres.
- Para-Aramid Fibre Production
- High-Strength Polymer
- Heat-Resistant Fibres
- Ballistic Protection Fibres
- Fibre-Forming Polymer
- Technical Textile Raw Material
Polyethylene drums with two polyethylene inner bags of up to 65 dm3 capacity.
Plasticiser-2 shall be stored, in the manufacturer's packaging, in enclosed dry storage areas protected from direct sunlight.
12 months from the date of manufacture
By rail and road transport.
Doküman tarihi: September 27, 2026
Bu belge, KORKİMYA tarafından tedarik edilen Korkamide AP-96 için geçerli KORKİMYA tedarik spesifikasyonunu gösterir. Bu belge bir parti analiz sonucu değildir. Her sevkiyatla birlikte parti bazlı analiz sertifikası düzenlenir.
Ürünün tüm bilgileri için Korkamide AP-96 ürün sayfasına bakabilirsiniz.