- Density, g/cm³
- 1.25
- Drying Time, h
- ~24
- Packing
- A: 17.5 kg + B: 3.5 kg (total 21 kg)
- Consumption, kg/m²
- 0.350-0.450
Technical Specifications
| Parameter | Value |
|---|---|
| Density, g/cm³ | 1.25 |
| Drying Time, h | ~24 |
| Packing | A: 17.5 kg + B: 3.5 kg (total 21 kg) |
| Consumption, kg/m² | 0.350-0.450 |
| Mixing Ratio, % | A/B: 5/1 |
| Hardness, Shore D | 70-75 |
| Shelf Life, months | 12 |
| Application Equipment | Applied with brush and roller |
Product Description
ANTI-AST is a two-component, solvent-free, epoxy resin-based, electrically conductive primer.
Application Areas
- Industrial floors.
- Production and storage areas.
- Places with sensitive electrical and electronic equipment.
- Areas with an explosion risk.
- As the bottom layer of antistatic floors.
Advantages
- Electrostatically conductive.
- Easy to apply.
- Forms a hard film.
- The film surface is glossy and slick, and prevents water and oil permeability.
- Easy to clean.
- Does not harbour bacteria.
- Dust-free.
Application
Loose particles and paint residues on the surface must be completely removed, broken and cracked areas must be repaired, and the surface must be mechanically roughened (by blastrac or milling) and cleaned of dust with a vacuum cleaner. After priming with POX 002 epoxy primer, conductive copper tapes are bonded and ANTI-AST Epoxy Conductive Primer is applied over them.
- The surfaces must have sufficient strength. The concrete must have a compressive strength of at least 25 N/mm² and a tensile strength of at least 1.5 N/mm².
- ANTI-AST must have completed its curing before the top coat is applied.
- Application should be avoided below 10°C and in very humid environments.
- Attention must be paid to the mixing ratios.
- Recommended products for use under this product: POX 002 Two-Component Solvent-Free Epoxy Primer
- Recommended products for use over this product: POX 070 Antistatic Epoxy Coating
Packaging & storage
Packaging
A: 17.5 kg + B: 3.5 kg (total 21 kg)
Shelf Life
12 months
Where it is used
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
Two-Component, Solvent-Free, Epoxy Resin-Based Conductive Primer Typical specifications: Density, g/cm³: 1.25; Drying Time, h: ~24; Packing: A: 17.5 kg + B: 3.5 kg (total 21 kg). KORKİMYA supplies ANTI-AST in A: 17.5 kg + B: 3.5 kg (total 21 kg). Shelf life: 12 months.
ANTI-AST is a two-component, solvent-free, epoxy resin-based, electrically conductive primer.
Two-Component, Solvent-Free, Epoxy Resin-Based Conductive Primer
- Category
- PRIMERS
Frequently asked questions
What are the key specifications of ANTI-AST?
The recorded supply specification for ANTI-AST includes Density, g/cm³: 1.25; Drying Time, h: ~24; Packing: A: 17.5 kg + B: 3.5 kg (total 21 kg); Consumption, kg/m²: 0.350-0.450; Mixing Ratio, %: A/B: 5/1. The full table is listed on this page.
How is ANTI-AST packaged and stored?
Packaging: A: 17.5 kg + B: 3.5 kg (total 21 kg). Shelf life: 12 months.
Is ANTI-AST KKDİK registered, and which documents are available?
Yes. ANTI-AST supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com