Construction Chemicals
The products in this section are formulated, ready-to-use construction systems: primers, floor coatings, waterproofing materials, injection resins, spray polyurethane foam and polyurea, sports surfaces, binders, adhesives and sealants.
They are not chemical raw materials. They are applied directly to a floor, roof, wall or structure. Each product page lists technical values and packaging.
If you know the job but not the product name, start with the application map or the product finder.
Looking for raw materials for production or formulation? Chemical raw material catalog
Product groups
The products fall into eight groups. Each group page lists its products with technical values and packaging.
PrimersPolyurethane, epoxy, acrylic and bitumen primers for preparing concrete, plaster, metal and other substrates.12 products
Floor coatingsEpoxy and polyurethane floor coatings: self-levelling, intermediate, top coat and antistatic systems.7 products
Waterproofing materialsBitumen-rubber, polyurethane, polyurea and elastomeric waterproofing materials, plus epoxy repair compounds.15 products
Injection materialsFlexible injection resins with catalyst and a low-viscosity epoxy injection resin.3 products
Spray insulationSpray polyurethane foam for thermal insulation and polyurea coating systems.7 products
Sports floor coatingsPolyurethane and acrylic systems for sports halls, running tracks and tennis courts: fillers, coatings, line paint and a protective layer.8 products
Binders and bonding agentsOne-component hot-applied and cold-applied binders: press, pour and spray types.3 products
Adhesives and masticsTwo-component polyurethane adhesives for rubber and parquet, and polyurethane and polysulfide sealants.6 products
Application map
Choose where the work is, then the job. The map shows the products used for that job. Each link is based on the product's own technical text.
Where
Job
Factory and industrial floors. Epoxy, polyurethane and polyurea floor systems for production areas exposed to forklift traffic, abrasion and chemicals.
Products
Floor primer. Epoxy primers that seal the concrete and stop dusting before the coating goes on.
Factory and industrial floors4 uses
Epoxy, polyurethane and polyurea floor systems for production areas exposed to forklift traffic, abrasion and chemicals.
Floor primer3 products
Epoxy primers that seal the concrete and stop dusting before the coating goes on.
Self-levelling coating4 products
Self-levelling epoxy and polyurethane coatings, with an epoxy intermediate coat, form a seamless floor.
Top coat and non-slip texture2 products
A roller-applied epoxy top coat, or an orange-peel textured coating where the floor must not be slippery.
Spray polyurea floor1 product
A thin, fast-curing polyurea layer that vehicles can drive on one hour after application.
- PUR 890
Antistatic Polyurea Floor Coating System
Warehouses and cold stores3 uses
Floor coatings and joint sealing in storage halls with forklift traffic, including cold stores.
Warehouse floor coating3 products
Hard epoxy and polyurea coatings for storage floors under forklift traffic.
Cold store floor2 products
Elastic self-levelling polyurethane coatings that list cold stores among their uses.
Floor joints1 product
A two-component polyurethane sealant for horizontal joints under heavy traffic.
- SEAL 2K H
Two-Component Polyurethane-Based Sealant Developed for Horizontal Surfaces
Car parks4 uses
Floor coatings, deck waterproofing, leak injection and joint sealing in open and enclosed car parks.
Car park floor coating5 products
An epoxy primer, then epoxy or polyurethane coatings that carry vehicle traffic.
- AQUATEX
Two-Component, Solvent-Based Epoxy Primer and Impregnation System
- POX 020
Two-Component, Reaction-Curing Epoxy Self-Levelling Coating
- POX 040
Two-Component, Reaction-Curing, Epoxy Resin-Based Epoxy Top Coat Floor and Wall Paint Cured with Polyamide Hardener
- POX 050
Orange Peel Textured Epoxy Floor Coating Material
- PUR 021
Two-Component Polyurethane-Based Self-Levelling Floor Coating
Deck waterproofing5 products
Bitumen-rubber, polyurethane and polyurea membranes for car park decks above and below ground.
- IZOBITUM 2K
Polymer-Modified, Bitumen-Rubber-Based, Two-Component Waterproofing Material
- PROOF MY
One-Component Polyurethane-Based, Easy-to-Apply, UV-Resistant Liquid Membrane Developed for Waterproofing and Protection
- PUR 560
Two-Component, 100% Solids Hybrid Polyurea Coating System with Fast-Curing and Flexible Properties
- PUR 670
Two-Component Flexible 100% Pure Polyurea Spray Coating System
- PUR 770
Two-Component Hot-Applied Flexible and Economical Polyurea Coating System
Leak injection2 products
Water-reactive polyurethane injection resins that stop seepage through cracks in underground garages.
Joint sealing2 products
Polyurethane and polysulfide sealants for horizontal joints under vehicle traffic.
Roofs4 uses
Liquid-applied membranes, spray polyurea and spray foam insulation for flat, sloped and lightweight roofs.
Primer under the membrane2 products
Primers that improve adhesion of the waterproofing layer to concrete or old asphalt membranes.
Liquid waterproofing membrane8 products
Bitumen-rubber, elastomeric and polyurethane membranes, applied by brush, roller or spray, that cure into a seamless layer.
- KB
One-Component, Bitumen-Rubber-Based, UV-Resistant, Elastic Waterproofing Material
- FLEXAL
Elastomeric Resin-Based, UV-Resistant, One-Component, Elastic Waterproofing Material
- SB
UV-Resistant Waterproofing Membrane Consisting of Special Mineral Filler and Polymer Components
- FLEX AST
One-Component, Water-Based Elastomeric Resin Primer
- PROOF
One-Component, Polyurethane-Based, Easy-to-Apply Liquid Membrane Developed for Waterproofing and Protection
- PROOF MY
One-Component Polyurethane-Based, Easy-to-Apply, UV-Resistant Liquid Membrane Developed for Waterproofing and Protection
- PROOF RC 1K
One-Component Polyurethane-Bitumen-Based Liquid Membrane Developed for Waterproofing and Protection
- PROOF RC 2K
Two-Component Polyurethane-Bitumen-Based Liquid Membrane Developed for Waterproofing and Protection
Spray polyurea coating3 products
Machine-sprayed polyurea that forms a one-piece membrane on concrete, trapezoidal sheet and sandwich panel roofs.
Spray foam insulation1 product
Spray polyurethane foam that insulates the roof without thermal bridges.
- PUR K35
Polyurethane-Based Spray Foam System for Thermal Insulation, Applied with Special Pressure Machines, Available in Different Densities
Terraces and balconies4 uses
Waterproofing under tiles, exposed membranes and transparent coatings over existing tiles on terraces and balconies.
Waterproofing under tiles3 products
A bitumen emulsion primer and bitumen or polyurethane-bitumen membranes laid before the tiles.
- KBE
One-Component Bitumen Emulsion-Based Primer
- IZOBITUM 2K
Polymer-Modified, Bitumen-Rubber-Based, Two-Component Waterproofing Material
- PROOF RC 2K
Two-Component Polyurethane-Bitumen-Based Liquid Membrane Developed for Waterproofing and Protection
Exposed membrane6 products
UV-resistant elastic membranes that stay exposed to sun and weather.
- KB
One-Component, Bitumen-Rubber-Based, UV-Resistant, Elastic Waterproofing Material
- FLEXAL
Elastomeric Resin-Based, UV-Resistant, One-Component, Elastic Waterproofing Material
- SB
UV-Resistant Waterproofing Membrane Consisting of Special Mineral Filler and Polymer Components
- FLEX AST
One-Component, Water-Based Elastomeric Resin Primer
- PROOF MY
One-Component Polyurethane-Based, Easy-to-Apply, UV-Resistant Liquid Membrane Developed for Waterproofing and Protection
- PUR 450
Two-Component, Cold-Applied Hybrid Polyurea Coating Material Applied by Roller or Trowel, Developed for Waterproofing
Polyurea and foam systems4 products
Spray polyurea for trafficked and green terraces, and spray foam where the terrace also needs insulation.
- PUR 560
Two-Component, 100% Solids Hybrid Polyurea Coating System with Fast-Curing and Flexible Properties
- PUR 670
Two-Component Flexible 100% Pure Polyurea Spray Coating System
- PUR 770
Two-Component Hot-Applied Flexible and Economical Polyurea Coating System
- PUR K35
Polyurethane-Based Spray Foam System for Thermal Insulation, Applied with Special Pressure Machines, Available in Different Densities
Transparent and decorative coating3 products
A transparent coating that waterproofs existing tiles without removing them, an aliphatic top coat and a decorative 3D floor resin.
- T GLASS
Two-Component, UV-Resistant Transparent Waterproofing Material with High Chemical and Physical Resistance
- FLOOR AL S
Two-Component Polyurethane-Based Aliphatic Top Coat Paint
- POX 007
Ultra-Clear, High-Gloss Casting Epoxy Resin
Foundations and basements4 uses
Waterproofing of foundations, basement walls and retaining walls, and injection of leaking cracks.
Bitumen waterproofing3 products
A bitumen emulsion primer and bitumen-rubber coatings for below-ground walls in contact with soil.
- KBE
One-Component Bitumen Emulsion-Based Primer
- KB
One-Component, Bitumen-Rubber-Based, UV-Resistant, Elastic Waterproofing Material
- IZOBITUM 2K
Polymer-Modified, Bitumen-Rubber-Based, Two-Component Waterproofing Material
Polyurethane-bitumen membrane2 products
Polyurethane-bitumen liquid membranes for foundations and floors.
- PROOF RC 1K
One-Component Polyurethane-Bitumen-Based Liquid Membrane Developed for Waterproofing and Protection
- PROOF RC 2K
Two-Component Polyurethane-Bitumen-Based Liquid Membrane Developed for Waterproofing and Protection
Spray polyurea2 products
Spray polyurea that covers foundation and retaining walls in one piece.
Leak injection2 products
Water-reactive polyurethane resins injected into leaking cracks and joints in foundations.
Tunnels4 uses
Leak and structural crack injection, waterproofing membranes and primers for tunnels and underground passages.
Leak injection2 products
Polyurethane injection resins that react with water and plug leaking cracks and joints.
Structural crack injection1 product
A low-viscosity epoxy resin injected through packers to restore strength at static cracks.
- POX 088
Two-Component, Epoxy-Based, Low-Viscosity Injection Resin
Tunnel waterproofing5 products
Polyurethane-bitumen, hybrid polyurea and spray polyurea membranes for tunnel structures.
- PROOF RC 2K
Two-Component Polyurethane-Bitumen-Based Liquid Membrane Developed for Waterproofing and Protection
- PUR 450
Two-Component, Cold-Applied Hybrid Polyurea Coating Material Applied by Roller or Trowel, Developed for Waterproofing
- PUR 560
Two-Component, 100% Solids Hybrid Polyurea Coating System with Fast-Curing and Flexible Properties
- PUR 670
Two-Component Flexible 100% Pure Polyurea Spray Coating System
- PUR 770
Two-Component Hot-Applied Flexible and Economical Polyurea Coating System
Concrete impregnation primer1 product
An epoxy impregnation primer that penetrates capillary voids and can be used on damp surfaces.
- AQUATEX
Two-Component, Solvent-Based Epoxy Primer and Impregnation System
Water tanks and reservoirs3 uses
Coatings for drinking water tanks, waterproofing of other tanks and injection of leaking reservoirs.
Drinking water tanks2 products
The two products whose own data names drinking water tanks: an epoxy primer and a polyurethane tank membrane.
- AQUATEX
Two-Component, Solvent-Based Epoxy Primer and Impregnation System
- PROOF 2K Y
Two-Component Polyurethane-Based Insulation Membrane Developed for Pool Waterproofing
Tank waterproofing5 products
Membranes and polyurea coatings for water and waste tanks that do not hold drinking water.
- PROOF RC 2K
Two-Component Polyurethane-Bitumen-Based Liquid Membrane Developed for Waterproofing and Protection
- FLEX AST
One-Component, Water-Based Elastomeric Resin Primer
- PUR 560
Two-Component, 100% Solids Hybrid Polyurea Coating System with Fast-Curing and Flexible Properties
- PUR 670
Two-Component Flexible 100% Pure Polyurea Spray Coating System
- PUR 890
Antistatic Polyurea Floor Coating System
Leak injection2 products
Polyurethane injection resins that stop seepage through cracks and joints in tanks and reservoirs.
Swimming pools3 uses
Waterproofing membranes, a top coat and a transparent coating for swimming, decorative and ornamental pools.
Pool waterproofing4 products
Elastomeric and polyurea membranes that line the pool basin.
- FLEX AST
One-Component, Water-Based Elastomeric Resin Primer
- PUR 560
Two-Component, 100% Solids Hybrid Polyurea Coating System with Fast-Curing and Flexible Properties
- PUR 670
Two-Component Flexible 100% Pure Polyurea Spray Coating System
- PUR 770
Two-Component Hot-Applied Flexible and Economical Polyurea Coating System
Pool top coat1 product
An aliphatic polyurethane top coat for indoor and outdoor pools that resists UV and wear.
- FLOOR AL S
Two-Component Polyurethane-Based Aliphatic Top Coat Paint
Tiled and mosaic pools1 product
A transparent coating that waterproofs decorative pools clad with ceramics or glass mosaic without removing the tiles.
- T GLASS
Two-Component, UV-Resistant Transparent Waterproofing Material with High Chemical and Physical Resistance
Wet areas4 uses
Waterproofing under and over tiles, and tile and panel bonding in bathrooms, WCs and kitchens.
Bitumen and mineral waterproofing under tiles4 products
Bitumen emulsion, bitumen-rubber, mineral-filled and elastomeric coatings that are covered with ceramic tiles.
- KBE
One-Component Bitumen Emulsion-Based Primer
- SB
UV-Resistant Waterproofing Membrane Consisting of Special Mineral Filler and Polymer Components
- IZOBITUM 2K
Polymer-Modified, Bitumen-Rubber-Based, Two-Component Waterproofing Material
- FLEX AST
One-Component, Water-Based Elastomeric Resin Primer
Polyurethane membrane under tiles4 products
Polyurethane and hybrid polyurea liquid membranes under the tiles on bathroom floors and walls.
- PROOF
One-Component, Polyurethane-Based, Easy-to-Apply Liquid Membrane Developed for Waterproofing and Protection
- PROOF MY
One-Component Polyurethane-Based, Easy-to-Apply, UV-Resistant Liquid Membrane Developed for Waterproofing and Protection
- PROOF RC 2K
Two-Component Polyurethane-Bitumen-Based Liquid Membrane Developed for Waterproofing and Protection
- PUR 450
Two-Component, Cold-Applied Hybrid Polyurea Coating Material Applied by Roller or Trowel, Developed for Waterproofing
Transparent waterproofing over tiles2 products
A transparent coating that waterproofs existing tiled floors in bathrooms and kitchens, and a decorative 3D floor resin.
Tile and panel bonding1 product
A polyurethane adhesive for tiles and cork or SBR sound-insulating panels on wet floors.
- PUR K 25
Two-Component Polyurethane-Based Rubber Adhesive
Sports halls and grounds4 uses
Elastic poured floors for indoor halls and fitness centres, and rubber granule surfaces for outdoor sports grounds.
Pore filling1 product
A polyurethane putty that fills the pores of the rubber mat so a self-levelling coating can follow.
- FLOOR M200
Two-Component Polyurethane Resin-Based Pore-Filling Putty
Hall floor coating3 products
Flexible self-levelling polyurethane coatings poured over EPDM sheets in indoor sports halls.
Sports floor top coat1 product
A UV-resistant aliphatic polyurethane top coat for sports floors and fitness centres.
- FLOOR AL S
Two-Component Polyurethane-Based Aliphatic Top Coat Paint
Rubber granule grounds3 products
Polyurethane binders and coatings for poured granule sports grounds and multi-purpose fields.
Running tracks2 uses
A coloured self-levelling polyurethane coating for athletics tracks, also used to renew existing tracks.
Track coating1 product
A solvent-free polyurethane track coating made for outdoor conditions.
- FLOOR AF
Two-Component Polyurethane-Based Self-Levelling Floor Coating for Athletics Tracks
Track renewal1 product
The same coating repairs or renews existing polyurethane sports floors.
- FLOOR AF
Two-Component Polyurethane-Based Self-Levelling Floor Coating for Athletics Tracks
Tennis, basketball and volleyball courts4 uses
The acrylic court system on asphalt or concrete: primer, pore filler, cushion layer, textured top coat, varnish and lines.
Base preparation2 products
An elastomeric primer and an acrylic pore filler that close the pores of new asphalt or concrete and level the surface.
Cushion layer1 product
An acrylic layer with rubber granules that gives the court surface flexibility.
- FLEX CS
Acrylic Resin-Based Flexible Layer with Special Granulometric Rubber
Top coat and varnish2 products
A quartz-filled acrylic top coat that controls game speed, then a protective varnish over it.
- TOPCOAT 40
One-Component Acrylic Top Coat for Tennis Courts
- VARNISH LK
One-Component Protective Layer for Top Coat
Line marking1 product
A flexible acrylic paint for the playing lines, applied over a primer coat.
- LINE PAINT
One-Component Flexible Line Marking Paint for Sports Surfaces
Playgrounds and rubber floors3 uses
Binders for poured and pressed rubber granule floors, adhesives for rubber coverings and top coats for playgrounds.
Rubber granule binder3 products
Polyurethane binders for pressed rubber tiles and for poured or sprayed granule floors.
Rubber covering adhesive2 products
Two-component polyurethane adhesives that bond rubber coverings to concrete, metal, asphalt and playground bases.
Pore filling and top coat3 products
A putty that fills the pores of rubber granule floors, and polyurethane coatings for playground surfaces.
- FLOOR M200
Two-Component Polyurethane Resin-Based Pore-Filling Putty
- FLOOR AL S
Two-Component Polyurethane-Based Aliphatic Top Coat Paint
- FLOOR AF
Two-Component Polyurethane-Based Self-Levelling Floor Coating for Athletics Tracks
Parquet installation2 uses
Polyurethane adhesives for parquet and laminate, and a bitumen emulsion primer for parquet laid in hot bitumen.
Parquet adhesive3 products
Two-component polyurethane adhesives for long and short parquet, laminate and wood coverings.
Primer for hot-bitumen bonding1 product
A bitumen emulsion primer applied on the screed before parquet is laid in hot bitumen.
- KBE
One-Component Bitumen Emulsion-Based Primer
Concrete repair and anchoring3 uses
Epoxy anchoring and grouting mortars, repair putties and primers, and surface hardening and protection for concrete.
Anchoring and grouting2 products
Epoxy mortars for planting rebar, fixing steel parts to concrete and grouting under machines, rails and bearings.
- EPOXAN 300
Epoxy-Based, Two-Component Anchoring, Installation and Repair Mortar
- GROUT 500
Three-Component, Solvent-Free Repair and Filling Mortar
Local repair5 products
Epoxy putties, binders and primers, and elastic coatings, for patching damaged concrete and hairline cracks.
- EPOXAN 500
Two-Component, Solvent-Free, Thixotropic Lightweight Epoxy Filler Putty
- POX 005
Two-Component, Solvent-Free, Epoxy-Based Filled Primer
- POX 006
Two-Component, Solvent-Based Epoxy Primer and Impregnation System
- SEAL 2K-D
Two-Component Polyurethane-Based Thixotropic Sealant Developed for Vertical Surfaces
- PUR 770
Two-Component Hot-Applied Flexible and Economical Polyurea Coating System
Surface hardening and protection4 products
Impregnating primers and an acrylic curing polish that reduce dusting and water absorption of concrete.
Crack injection3 uses
Polyurethane resins that stop leaks and an epoxy resin that restores strength in cracked concrete.
Leak-stopping injection2 products
One-component polyurethane resins that react with water into an elastic plug, for concrete that moves.
Structural injection1 product
A low-viscosity epoxy resin that fills static cracks and, once cured, is stronger than concrete.
- POX 088
Two-Component, Epoxy-Based, Low-Viscosity Injection Resin
Packer fixing and surface sealing1 product
An epoxy paste that seals the crack surface and fixes the packers before injection.
- EPOXAN 300
Epoxy-Based, Two-Component Anchoring, Installation and Repair Mortar
Bridges and viaducts4 uses
Deck waterproofing, bearing grout, anchoring, crack injection and joint sealing for bridges.
Deck waterproofing4 products
Polyurethane and polyurea membranes for bridge platforms.
- PROOF MY
One-Component Polyurethane-Based, Easy-to-Apply, UV-Resistant Liquid Membrane Developed for Waterproofing and Protection
- PROOF RC 2K
Two-Component Polyurethane-Bitumen-Based Liquid Membrane Developed for Waterproofing and Protection
- PUR 450
Two-Component, Cold-Applied Hybrid Polyurea Coating Material Applied by Roller or Trowel, Developed for Waterproofing
- PUR 770
Two-Component Hot-Applied Flexible and Economical Polyurea Coating System
Bearings and anchoring2 products
Epoxy grout under bridge bearings and epoxy mortar for guardrails and seismic dampers.
- GROUT 500
Three-Component, Solvent-Free Repair and Filling Mortar
- EPOXAN 300
Epoxy-Based, Two-Component Anchoring, Installation and Repair Mortar
Crack injection1 product
An epoxy injection resin that restores strength at static cracks in bridge concrete.
- POX 088
Two-Component, Epoxy-Based, Low-Viscosity Injection Resin
Joint sealing2 products
Elastic polyurethane and polysulfide sealants for joints at bridge connections.
Food, pharma and hospital areas4 uses
Hygienic, easy-to-clean floor and wall systems for food plants, pharmaceutical sites, laboratories and hospitals.
Primer for hygienic areas3 products
Epoxy primers and impregnation systems listed for food, chemical and pharmaceutical plants.
Hygienic floor coating6 products
Seamless epoxy and polyurethane coatings that are easy to clean and do not harbour bacteria.
- POX 020
Two-Component, Reaction-Curing Epoxy Self-Levelling Coating
- POX 030
Two-Component, Epoxy-Based High-Strength Intermediate Coating
- POX 040
Two-Component, Reaction-Curing, Epoxy Resin-Based Epoxy Top Coat Floor and Wall Paint Cured with Polyamide Hardener
- POX 050
Orange Peel Textured Epoxy Floor Coating Material
- PUR 021
Two-Component Polyurethane-Based Self-Levelling Floor Coating
- FLOOR SL
Two-Component Flexible Self-Levelling Coating Developed for Indoor Sports Halls
Operating theatres and hospital floors4 products
Floor systems listed for operating theatres and hospitals, and a primer for operating theatre walls.
Kitchens and restaurants1 product
An antibacterial polyurea coating for restaurant and kitchen floors.
- PUR 770
Two-Component Hot-Applied Flexible and Economical Polyurea Coating System
Antistatic areas2 uses
A conductive epoxy floor system for rooms with sensitive electronic equipment and areas with an explosion risk.
Conductive primer1 product
A conductive epoxy primer laid over copper tapes as the bottom layer of the antistatic floor.
- ANTI-AST
Two-Component, Solvent-Free, Epoxy Resin-Based Conductive Primer
Antistatic top coat1 product
The charge-carrying epoxy top coat of the antistatic system.
- POX 070
Two-Component, Solvent-Free Epoxy Resin-Based Antistatic Epoxy Floor Coating System
Road and floor marking2 uses
Acrylic marking paint for roads and pedestrian crossings, and an acrylic primer for lines on concrete floors.
Road marking1 product
A cold-applied acrylic paint for highways, pedestrian crossings and airports.
- LINE PAINT
One-Component Flexible Line Marking Paint for Sports Surfaces
Primer for floor marking1 product
A transparent acrylic primer that gives line marking adhesion on concrete floors.
- POX 001
One-Component, Solvent-Based, Acrylic-Based Transparent Concrete Primer
Joints3 uses
Elastic sealants for horizontal joints in floors, roads and car parks, and for junctions in floor coatings.
Horizontal joints under traffic2 products
Polyurethane and polysulfide joint fillers for horizontal joints that carry heavy traffic.
Submerged and chemical-exposed joints1 product
A polysulfide sealant for joints that stay under water or face chemicals, such as at fuel stations.
- JOINT 60
Two-Component Polysulfide-Based Self-Levelling Sealant
Coating junctions1 product
A thixotropic polyurethane paste for chamfers where horizontal and vertical surfaces of a floor coating meet.
- SEAL 2K-D
Two-Component Polyurethane-Based Thixotropic Sealant Developed for Vertical Surfaces
All applications as a list
Every place, job and product link from the map
Factory and industrial floors
Warehouses and cold stores
Car parks
Roofs
Terraces and balconies
Foundations and basements
- Bitumen waterproofing
- Polyurethane-bitumen membrane
- Spray polyurea
- Leak injection
Tunnels
Water tanks and reservoirs
- Drinking water tanks
- Tank waterproofing
- Leak injection
Swimming pools
Wet areas
Sports halls and grounds
- Pore filling
- Hall floor coating
- Sports floor top coat
- Rubber granule grounds
Running tracks
Tennis, basketball and volleyball courts
- Base preparation
- Cushion layer
- Top coat and varnish
- Line marking
Playgrounds and rubber floors
- Rubber granule binder
- Rubber covering adhesive
- Pore filling and top coat
Parquet installation
Concrete repair and anchoring
Crack injection
- Leak-stopping injection
- Structural injection
- Packer fixing and surface sealing
Bridges and viaducts
- Deck waterproofing
- Bearings and anchoring
- Crack injection
- Joint sealing
Food, pharma and hospital areas
Antistatic areas
Road and floor marking
- Road marking
- Primer for floor marking
Joints
Product finder
Type a product name, a job or a substrate, or use the filters. Product group, place of use and sector are separate filters.
61 products found
AST PU
One-Component Polyurethane-Based Solvent-Borne Primer
UNIVERSAL AST 2K-570
Two-Component Polyurethane-Based Primer
POX 001
One-Component, Solvent-Based, Acrylic-Based Transparent Concrete Primer
POX 090
One-Component Acrylic-Based Concrete Polish
POX 002
Two-Component, Solvent-Free, 100% Solids Epoxy Resin-Based Primer
POX 003
Two-Component Epoxy Primer with Extra Moisture Tolerance
POX 005
Two-Component, Solvent-Free, Epoxy-Based Filled Primer
POX 006
Two-Component, Solvent-Based Epoxy Primer and Impregnation System
AQUATEX
Two-Component, Solvent-Based Epoxy Primer and Impregnation System
ANTI-AST
Two-Component, Solvent-Free, Epoxy Resin-Based Conductive Primer
KBE
One-Component Bitumen Emulsion-Based Primer
FLEX AST
One-Component, Water-Based Elastomeric Resin Primer