- Density, g/cm³
- 1.05-1.08
- Drying Time, h
- ~24
- Usage Amount, SBR
- SBR 92% + colorant 3% + binder 5%
- Viscosity, mPa·s
- 4500
Technical Specifications
| Parameter | Value |
|---|---|
| Density, g/cm³ | 1.05-1.08 |
| Drying Time, h | ~24 |
| Usage Amount, SBR | SBR 92% + colorant 3% + binder 5% |
| Viscosity, mPa·s | 4500 |
| Packing | 200 kg steel drum |
| Usage Amount, EPDM | EPDM 92% + binder 8% |
Product Description
PUR 700 is a one-component, polyurethane-based, multi-purpose binder and adhesive. It is an SBR and EPDM rubber binding material for solvent-free press types. It has a structure resistant to chemical effects, physical stresses and minor substrate movements.
Advantages
- Water-resistant.
- Cures quickly in hot and humid weather.
- Has a flexible structure.
- Provides excellent resistance to outdoor conditions.
Application Areas
- Production of rubber tiles
- Bonding of concrete, metal and PVC
- Bonding of wooden materials
- Used for bonding rubber, gaskets, felt and cork
Application
In machine press applications, the rubber buffing granules you select for high efficiency must be clean and thoroughly free from chemical oils, dust and soil. Before pressing, the granules and pigment for colouring are added to the mixer. Then 5% binder is mixed in, and the material is pressed and cured at 120 °C-160 °C for between 5 and 20 minutes, depending on the thickness of the product to be obtained. On request, a single spray of steam can be applied to accelerate the curing of the product.
Packaging & storage
Packaging
200 kg steel drum
Where it is used
Used together with
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
One-Component Hot-Applied Press-Type Binder Typical specifications: Density, g/cm³: 1.05-1.08; Drying Time, h: ~24; Usage Amount, SBR: SBR 92% + colorant 3% + binder 5%. KORKİMYA supplies PUR 700 in 200 kg steel drum.
PUR 700 is a one-component, polyurethane-based, multi-purpose binder and adhesive. It is an SBR and EPDM rubber binding material for solvent-free press types. It has a structure resistant to chemical effects, physical stresses and minor substrate movements.
One-Component Hot-Applied Press-Type Binder
- Category
- BINDERS AND BONDING AGENTS
Frequently asked questions
What are the key specifications of PUR 700?
The recorded supply specification for PUR 700 includes Density, g/cm³: 1.05-1.08; Drying Time, h: ~24; Usage Amount, SBR: SBR 92% + colorant 3% + binder 5%; Viscosity, mPa·s: 4500; Packing: 200 kg steel drum. The full table is listed on this page.
How is PUR 700 packaged and stored?
Packaging: 200 kg steel drum.
Is PUR 700 KKDİK registered, and which documents are available?
Yes. PUR 700 supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com