PUR 800

One-Component Cold-Applied Pour-Type Binder

AI-generated illustrative studio still-life for Binders and bonding agents, on a transparent background: recycled-rubber tiles and a disc of bound EPDM granules. Not a photograph of an actual project, job site, or product package. — Illustrative application image; not a photograph of the actual product or package.

Density, g/cm³: 1.05-1.08
Drying Time, h: ~24
Usage Amount, SBR: SBR 100% + binder 18%-23%
Viscosity, mPa·s: 4500

Technical Specifications

Parameter	Value
Density, g/cm³	1.05-1.08
Drying Time, h	~24
Usage Amount, SBR	SBR 100% + binder 18%-23%
Viscosity, mPa·s	4500
Packing	200 kg steel drum
Usage Amount, EPDM	EPDM 100%, binder 18%-23%

Product Description

PUR 800 is a one-component, polyurethane-based, multi-purpose binder developed for in-situ casting applications. It has a structure resistant to physical stresses and minor substrate movements.

Advantages

Water-resistant.
Cures quickly in hot and humid weather.
Has a flexible structure.
Provides excellent resistance to outdoor conditions.
High adhesion strength.

Application Areas

Construction of playgrounds
Production of rubber tiles
Bonding of concrete, metal and PVC
Bonding of wooden materials
Decorative coatings
Sports grounds
Used for bonding rubber, gaskets, felt and cork

Application

In pour-in-place applications, in order to bond EPDM rubber and SBR rubber buffing granules to each other with high efficiency, the granules must be clean and thoroughly free from chemical oils, dust and soil. For the mix, SBR rubber is mixed in the mixer with the binder at a ratio of 20%-25%. The binder and rubber mixture is poured onto the previously cleaned surface primed with PU binder and spread evenly with a finisher or trowel. Final adjustments are made by hand, and the surface is left to dry. After the SBR layer has dried, the EPDM layer is applied with the same system, completing the application.

On request, a single spray of steam can be applied to accelerate the curing of the product.

Packaging & storage

Packaging

200 kg steel drum

Where it is used

Used together with

PUR 900 · One-Component Cold-Applied Spray-Type Binder
FLOOR AF · Two-Component Polyurethane-Based Self-Levelling Floor Coating for Athletics Tracks
PUR 700 · One-Component Hot-Applied Press-Type Binder

Documents

Technical data sheet (TDS)

Review the recorded specifications, packaging and storage information.

View technical data sheet ↗

Safety & lot documents

Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.

SDS available on request.

Request Sample

Product Information

One-Component Cold-Applied Pour-Type Binder Typical specifications: Density, g/cm³: 1.05-1.08; Drying Time, h: ~24; Usage Amount, SBR: SBR 100% + binder 18%-23%. KORKİMYA supplies PUR 800 in 200 kg steel drum.

PUR 800 is a one-component, polyurethane-based, multi-purpose binder developed for in-situ casting applications. It has a structure resistant to physical stresses and minor substrate movements.

One-Component Cold-Applied Pour-Type Binder

Category: BINDERS AND BONDING AGENTS

Frequently asked questions

What are the key specifications of PUR 800?

The recorded supply specification for PUR 800 includes Density, g/cm³: 1.05-1.08; Drying Time, h: ~24; Usage Amount, SBR: SBR 100% + binder 18%-23%; Viscosity, mPa·s: 4500; Packing: 200 kg steel drum. The full table is listed on this page.

How is PUR 800 packaged and stored?

Packaging: 200 kg steel drum.

Is PUR 800 KKDİK registered, and which documents are available?

Yes. PUR 800 supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.