- Density, g/cm³
- A: 1.80 / B: 1.22
- Drying Time, h
- ~48
- Packing
- A: 21 kg + B: 3 kg (total 24 kg)
- Consumption, kg/m²
- 1.2-2
Technical Specifications
| Parameter | Value |
|---|---|
| Density, g/cm³ | A: 1.80 / B: 1.22 |
| Drying Time, h | ~48 |
| Packing | A: 21 kg + B: 3 kg (total 24 kg) |
| Consumption, kg/m² | 1.2-2 |
| Mixing Ratio, % | A/B: 7/1 |
| Hardness, Shore D | 75-80 |
| Shelf Life, months | 12 |
| Application Equipment | Applied with brush or roller. |
Product Description
A two-component, solvent-free, polyurethane-based multi-purpose rubber adhesive. It is used as an adhesive in rubber floor covering systems.
Product Features
It is a strong parquet adhesive with thixotropic properties, resistant to moisture, water and chemicals. Since it contains no solvents, it is completely non-flammable. It is resistant to abrasion, water, moisture, impact, acids and alkalis, seawater and most chemical and corrosive materials. After hardening it forms a very solid layer. It hardens without any significant volume change even at low temperatures. The drying time can be shortened by means of catalysts. It is a polyurethane parquet adhesive with high adhesion to the surface it is applied to. It exceeds the elongation and elasticity coefficients of the surface it is applied to.
Application Areas
It is a strong polyurethane adhesive used for bonding rubber coverings, ceramics and granite to floors, and for bonding rubber coverings to playgrounds, other floors and walls. It is used for bonding all kinds of rubber and parquet. PK40 gives much better results than other types of adhesive when bonding wood to concrete. As a heat-resistant polyurethane, it can be used in underfloor heating systems. Since it is not affected by sunlight and water, its bonding performance lasts up to 20 years. It is also used for multiple purposes in various sectors, for example in the white goods sector for bonding plastic parts to chipboard in the manufacture of top panels. It is used for bonding plastic to sandpaper in sanders with and without handles. Polyethylene and similar materials excepted, it is applied to all kinds of surfaces such as concrete, stone, wood, metal and eternit. It is a liquid-tight, antibacterial adhesive resistant to chemicals, impact and friction. It forms a smooth surface on the floor it is applied to and increases and reinforces the surface strength.
Packaging & storage
Packaging
A: 21 kg + B: 3 kg (total 24 kg)
Shelf Life
12 months
Where it is used
Used together with
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
Two-Component Polyurethane-Based Rubber Flooring Adhesive Typical specifications: Density, g/cm³: A: 1.80 / B: 1.22; Drying Time, h: ~48; Packing: A: 21 kg + B: 3 kg (total 24 kg). KORKİMYA supplies PK 40 in A: 21 kg + B: 3 kg (total 24 kg). Shelf life: 12 months.
A two-component, solvent-free, polyurethane-based multi-purpose rubber adhesive. It is used as an adhesive in rubber floor covering systems.
Two-Component Polyurethane-Based Rubber Flooring Adhesive
- Category
- ADHESIVES AND MASTICS
Frequently asked questions
What is PK 40 used for?
It is a strong polyurethane adhesive used for bonding rubber coverings, ceramics and granite to floors, and for bonding rubber coverings to playgrounds, other floors and walls. It is used for bonding all kinds of rubber and parquet. PK40 gives much better results than other types of adhesive when bonding wood to concrete. As a heat-resistant polyurethane, it can be used in underfloor heating systems. Since it is not affected by sunlight and water, its bonding performance lasts up to 20 years. It is also used for multiple purposes in various sectors, for example in the white goods sector for bonding plastic parts to chipboard in the manufacture of top panels. It is used for bonding plastic to sandpaper in sanders with and without handles. Polyethylene and similar materials excepted, it is applied to all kinds of surfaces such as concrete, stone, wood, metal and eternit. It is a liquid-tight, antibacterial adhesive resistant to chemicals, impact and friction. It forms a smooth surface on the floor it is applied to and increases and reinforces the surface strength.
What are the key specifications of PK 40?
The recorded supply specification for PK 40 includes Density, g/cm³: A: 1.80 / B: 1.22; Drying Time, h: ~48; Packing: A: 21 kg + B: 3 kg (total 24 kg); Consumption, kg/m²: 1.2-2; Mixing Ratio, %: A/B: 7/1. The full table is listed on this page.
How is PK 40 packaged and stored?
Packaging: A: 21 kg + B: 3 kg (total 24 kg). Shelf life: 12 months.
Is PK 40 KKDİK registered, and which documents are available?
Yes. PK 40 supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com