- Density, g/cm³
- 1.45
- Drying Time, h
- ~24
- Packing
- A: 16 kg + B: 2 kg (total 18 kg)
- Application Equipment
- Applied with brush or roller.
Technical Specifications
| Parameter | Value |
|---|---|
| Density, g/cm³ | 1.45 |
| Drying Time, h | ~24 |
| Packing | A: 16 kg + B: 2 kg (total 18 kg) |
| Application Equipment | Applied with brush or roller. |
| Mixing Ratio, % | A/B: 8/1 |
| Elongation at Break, % | 350 |
| Shelf Life, months | 12 |
Product Description
SEAL 2K H is a polyurethane-based, two-component, cold-applied, chemically curing elastomeric joint filler and insulation material that gives a smooth surface, has high working flexibility and adhesion strength, is resistant to dynamic movements and is suitable for heavy traffic conditions. It is resistant to organic and inorganic acids and alkalis, oil, fuel and antifreeze, and many chemicals.
Advantages
- Polyurethane-based, two-component.
- Cold-applied. Adhesion strength is very high.
- Can be used in indoor and outdoor applications.
- Has a structure resistant to dynamic movements.
- Resistant to oil, fuel and many chemicals.
- Faster or slower curing can be achieved according to user requirements.
Application Areas
Manufactured to provide a smooth surface for horizontal joints, SEAL 2K H has a very wide range of use indoors and outdoors where load-bearing resistance and elasticity are required together. With its various colour options, it can also meet requirements where visual appearance is important. Highways, bridge connections, stadiums, floors in industrial facilities, warehouses, bonded warehouses, port areas, dam platforms, markets, bazaars, pedestrian areas, pavements, airport runways, car parks, terminals and ramps, cargo areas and similar open or closed areas and roads exposed to all kinds of traffic are some of its areas of use. It is likewise used to provide sealing and adhesion at the edges of and under manhole covers on urban roads. In short, it is suitable for all kinds of horizontal joints or joints with a slope of less than 2% and connection points in indoor and outdoor areas.
Application
Joint surfaces must be clean and dry. Oil, grease, bitumen or old joint materials must be completely removed. Loose material at the joint edges must be removed and broken joint edges must be repaired. Like all other polyurethane-based materials, SEAL 2K H is affected by water before it cures. For this reason, the joints must be dry and the filler must not come into contact with water until chemical curing has taken place.
Packaging & storage
Packaging
A: 16 kg + B: 2 kg (total 18 kg)
Shelf Life
12 months
Where it is used
Used together with
- JOINT 60 · Two-Component Polysulfide-Based Self-Levelling Sealant
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
Two-Component Polyurethane-Based Sealant Developed for Horizontal Surfaces Typical specifications: Density, g/cm³: 1.45; Drying Time, h: ~24; Packing: A: 16 kg + B: 2 kg (total 18 kg). KORKİMYA supplies SEAL 2K H in A: 16 kg + B: 2 kg (total 18 kg). Shelf life: 12 months.
SEAL 2K H is a polyurethane-based, two-component, cold-applied, chemically curing elastomeric joint filler and insulation material that gives a smooth surface, has high working flexibility and adhesion strength, is resistant to dynamic movements and is suitable for heavy traffic conditions. It is resistant to organic and inorganic acids and alkalis, oil, fuel and antifreeze, and many chemicals.
Two-Component Polyurethane-Based Sealant Developed for Horizontal Surfaces
- Category
- ADHESIVES AND MASTICS
Frequently asked questions
What is SEAL 2K H used for?
Manufactured to provide a smooth surface for horizontal joints, SEAL 2K H has a very wide range of use indoors and outdoors where load-bearing resistance and elasticity are required together. With its various colour options, it can also meet requirements where visual appearance is important. Highways, bridge connections, stadiums, floors in industrial facilities, warehouses, bonded warehouses, port areas, dam platforms, markets, bazaars, pedestrian areas, pavements, airport runways, car parks, terminals and ramps, cargo areas and similar open or closed areas and roads exposed to all kinds of traffic are some of its areas of use. It is likewise used to provide sealing and adhesion at the edges of and under manhole covers on urban roads. In short, it is suitable for all kinds of horizontal joints or joints with a slope of less than 2% and connection points in indoor and outdoor areas.
What are the key specifications of SEAL 2K H?
The recorded supply specification for SEAL 2K H includes Density, g/cm³: 1.45; Drying Time, h: ~24; Packing: A: 16 kg + B: 2 kg (total 18 kg); Application Equipment: Applied with brush or roller.; Mixing Ratio, %: A/B: 8/1. The full table is listed on this page.
How is SEAL 2K H packaged and stored?
Packaging: A: 16 kg + B: 2 kg (total 18 kg). Shelf life: 12 months.
Is SEAL 2K H KKDİK registered, and which documents are available?
Yes. SEAL 2K H supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com