- Density, g/cm³
- 1.45
- Drying Time, h
- ~24
- Packing
- A: 4 kg + B: 2.5 kg (total 6.5 kg)
- Consumption, kg/m²
- -
Technical Specifications
| Parameter | Value |
|---|---|
| Density, g/cm³ | 1.45 |
| Drying Time, h | ~24 |
| Packing | A: 4 kg + B: 2.5 kg (total 6.5 kg) |
| Consumption, kg/m² | - |
| Mixing Ratio, % | A/B: 4/1 |
| Hardness, Shore A | 40 |
| Shelf Life, months | 12 |
| Application Equipment | Applied with brush or roller. |
Product Description
A polysulfide-based, two-component, chemically curing, elastomeric, self-levelling joint filler with high adhesion strength, suitable for heavy traffic conditions, designed for use in horizontal areas and accommodating permanent movements.
Advantages
- Suitable for heavy-duty and traffic conditions
- Easy application in horizontal areas thanks to its self-levelling structure
- High adhesion strength
- Resistance to static and dynamic movements
- Resistance to chemicals
Application Areas
It is especially suitable for applications that will remain under water and for places where chemical resistance is important. It is used as a joint material on roads and concrete areas in highways exposed to all kinds of traffic, car parks, secondary roads, bridge connections, stadiums, industrial floors, pavements, fuel stations, and petrochemical and other industrial facilities. It is suitable for all horizontal joints in open and closed areas.
Application
- Component A of JOINT 60 is mixed on its own with a low-speed mixer for 2-3 minutes. Component B is then added to the mixture and mixing is continued for a further 3-5 minutes.
- The mixture must be prepared taking into account the application area and the capacity of the application equipment. Material that has exceeded its pot life must not be used.
- The prepared material is applied by pouring it into the joint without leaving any voids.
- After application, the sealant must be smoothed with a spatula. It can also be applied directly with a spatula.
- After application, all tools used must be cleaned with synthetic thinner before the sealant hardens.
Packaging & storage
Packaging
A: 4 kg + B: 2.5 kg (total 6.5 kg)
Shelf Life
12 months
Where it is used
Used together with
- SEAL 2K H · Two-Component Polyurethane-Based Sealant Developed for Horizontal Surfaces
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
Two-Component Polysulfide-Based Self-Levelling Sealant Typical specifications: Density, g/cm³: 1.45; Drying Time, h: ~24; Packing: A: 4 kg + B: 2.5 kg (total 6.5 kg). KORKİMYA supplies JOINT 60 in A: 4 kg + B: 2.5 kg (total 6.5 kg). Shelf life: 12 months.
A polysulfide-based, two-component, chemically curing, elastomeric, self-levelling joint filler with high adhesion strength, suitable for heavy traffic conditions, designed for use in horizontal areas and accommodating permanent movements.
Two-Component Polysulfide-Based Self-Levelling Sealant
- Category
- ADHESIVES AND MASTICS
Frequently asked questions
What is JOINT 60 used for?
It is especially suitable for applications that will remain under water and for places where chemical resistance is important. It is used as a joint material on roads and concrete areas in highways exposed to all kinds of traffic, car parks, secondary roads, bridge connections, stadiums, industrial floors, pavements, fuel stations, and petrochemical and other industrial facilities. It is suitable for all horizontal joints in open and closed areas.
What are the key specifications of JOINT 60?
The recorded supply specification for JOINT 60 includes Density, g/cm³: 1.45; Drying Time, h: ~24; Packing: A: 4 kg + B: 2.5 kg (total 6.5 kg); Consumption, kg/m²: -; Mixing Ratio, %: A/B: 4/1. The full table is listed on this page.
How is JOINT 60 packaged and stored?
Packaging: A: 4 kg + B: 2.5 kg (total 6.5 kg). Shelf life: 12 months.
Is JOINT 60 KKDİK registered, and which documents are available?
Yes. JOINT 60 supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com