- Density, g/cm³
- 1.45
- Drying Time, h
- ~24
- Adhesion Strength, N/mm²
- > 1.5
- Packing
- A: 12 kg + B: 2 kg (total 14 kg)
Technical Specifications
| Parameter | Value |
|---|---|
| Density, g/cm³ | 1.45 |
| Drying Time, h | ~24 |
| Adhesion Strength, N/mm² | > 1.5 |
| Packing | A: 12 kg + B: 2 kg (total 14 kg) |
| Consumption, kg/m² | 0.600-0.650 |
| Viscosity, mPa·s | 2500-3000 |
| Hardness, Shore D | 80 ± 5 |
| Abrasion Resistance, mg | 70 |
| Mixing Ratio, % | A/B: 6/1 |
| Shelf Life, months | 12 |
Product Description
POX 050 is a two-component, epoxy-based, solvent-free, coloured, orange peel textured, hygienic, easy-to-clean, economical, thixotropic floor coating material with excellent mechanical abrasion and chemical resistance.
Advantages
- Does not create dust.
- Forms a hard film.
- Creates a jointless surface.
- Easy to clean, hygienic, requires no maintenance for a long time.
- Easy to apply.
- Solvent-free.
Application Areas
- Ramps and floors where a non-slip surface is required
- Factories, warehouses
- Shopping centres, workshops
- Aircraft hangars, schools
- Hospitals, pharmaceutical industry
- Chemical plants, food industry
- Laboratories, car parks, treatment plants
- Areas where heavy forklifts and corrosive chemicals are used
Application
POX 050 is produced in ready-to-use sets according to the mixing ratios. Component A is mixed with an industrial mixer at 300-400 rpm fitted with a suitable mixing paddle, then hardener component B is added and mixing is continued. Care must be taken that the A and B components are mixed very well at the walls and bottom of the container and that the mixture is homogeneous. Otherwise, unmixed A or B components may form a soft, sticky film on the surface after application and cause a defective application. The mixture is then transferred to another clean container and mixed for a further 2-3 minutes. No more material should be prepared than can be applied within the pot life. POX 050 is applied with a texture (coral) roller.
Packaging & storage
Packaging
A: 12 kg + B: 2 kg (total 14 kg)
Shelf Life
12 months
Where it is used
Used together with
- POX 040 · Two-Component, Reaction-Curing, Epoxy Resin-Based Epoxy Top Coat Floor and Wall Paint Cured with Polyamide Hardener
- PUR 890 · Antistatic Polyurea Floor Coating System
- AQUATEX · Two-Component, Solvent-Based Epoxy Primer and Impregnation System
- POX 020 · Two-Component, Reaction-Curing Epoxy Self-Levelling Coating
- PUR 021 · Two-Component Polyurethane-Based Self-Levelling Floor Coating
- POX 030 · Two-Component, Epoxy-Based High-Strength Intermediate Coating
- FLOOR SL · Two-Component Flexible Self-Levelling Coating Developed for Indoor Sports Halls
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
Orange Peel Textured Epoxy Floor Coating Material Typical specifications: Density, g/cm³: 1.45; Drying Time, h: ~24; Adhesion Strength, N/mm²: > 1.5. KORKİMYA supplies POX 050 in A: 12 kg + B: 2 kg (total 14 kg). Shelf life: 12 months.
POX 050 is a two-component, epoxy-based, solvent-free, coloured, orange peel textured, hygienic, easy-to-clean, economical, thixotropic floor coating material with excellent mechanical abrasion and chemical resistance.
Orange Peel Textured Epoxy Floor Coating Material
- Category
- FLOOR COATINGS
Frequently asked questions
What are the key specifications of POX 050?
The recorded supply specification for POX 050 includes Density, g/cm³: 1.45; Drying Time, h: ~24; Adhesion Strength, N/mm²: > 1.5; Packing: A: 12 kg + B: 2 kg (total 14 kg); Consumption, kg/m²: 0.600-0.650. The full table is listed on this page.
How is POX 050 packaged and stored?
Packaging: A: 12 kg + B: 2 kg (total 14 kg). Shelf life: 12 months.
Is POX 050 KKDİK registered, and which documents are available?
Yes. POX 050 supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com