- Density, g/cm³
- 1.10
- Drying Time, h
- ~24
- Compressive Strength, N/mm²
- ~50
- Packing
- A: 10 kg + B: 6 kg (total 16 kg)
Technical Specifications
| Parameter | Value |
|---|---|
| Density, g/cm³ | 1.10 |
| Drying Time, h | ~24 |
| Compressive Strength, N/mm² | ~50 |
| Packing | A: 10 kg + B: 6 kg (total 16 kg) |
| Consumption, kg/m²/mm | 1.1 |
| Viscosity, mPa·s | 300-500 |
| Hardness, Shore D | 75±5 |
| Tensile Strength, N/mm² | 12 |
| Mixing Ratio, % | A/B: 10/6 |
| Shelf Life, months | 12 |
Product Description
POX 007 is a two-component, solvent-free, transparent epoxy coating material for decorative casting.
Application Areas
- General-purpose adhesives
- As a binder in cement and mortars.
- 3D floor coatings for bathrooms and terraces.
- Non-slip coatings.
- Industrial coatings.
- Fibre-reinforced plastics
- Art and hobby applications
- Wooden tables, decorative items, ornaments, log casting
Advantages
- Does not yellow
- Excellent resistance thanks to an extra UV additive
- Does not form air bubbles
- Forms a hard film.
- Does not dust
- Has excellent gloss.
- Waterproof.
- Chemically and mechanically resistant.
- Transparent.
- Antibacterial.
Application
First, a suitable clean container is prepared according to the quantity to be mixed. Component A of POX 007 is weighed into the container according to the mixing ratio, then component B of POX 007 is added to it in small portions, observing the required mixing ratio. The mixture is stirred with a stick or hand drill at low speed without excessive foaming. After the mixture has rested for 3-5 minutes, wait for the foam on its surface to disappear; if the bubbles have not dissipated, wait a few more minutes. Then pour slowly at a suitable angle, starting from one corner of the mould to be filled. The product becomes touch-hard within a maximum of 72 hours and reaches 90% hardness within 7 days.
Packaging & storage
Packaging
A: 10 kg + B: 6 kg (total 16 kg)
Shelf Life
12 months
Where it is used
Used together with
- T GLASS · Two-Component, UV-Resistant Transparent Waterproofing Material with High Chemical and Physical Resistance
- FLOOR AL S · Two-Component Polyurethane-Based Aliphatic Top Coat Paint
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
Ultra-Clear, High-Gloss Casting Epoxy Resin Typical specifications: Density, g/cm³: 1.10; Drying Time, h: ~24; Compressive Strength, N/mm²: ~50. KORKİMYA supplies POX 007 in A: 10 kg + B: 6 kg (total 16 kg). Shelf life: 12 months.
POX 007 is a two-component, solvent-free, transparent epoxy coating material for decorative casting.
Ultra-Clear, High-Gloss Casting Epoxy Resin
- Category
- FLOOR COATINGS
Frequently asked questions
What are the key specifications of POX 007?
The recorded supply specification for POX 007 includes Density, g/cm³: 1.10; Drying Time, h: ~24; Compressive Strength, N/mm²: ~50; Packing: A: 10 kg + B: 6 kg (total 16 kg); Consumption, kg/m²/mm: 1.1. The full table is listed on this page.
How is POX 007 packaged and stored?
Packaging: A: 10 kg + B: 6 kg (total 16 kg). Shelf life: 12 months.
Is POX 007 KKDİK registered, and which documents are available?
Yes. POX 007 supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com