T GLASS
Two-Component, UV-Resistant Transparent Waterproofing Material with High Chemical and Physical Resistance
- Density, g/cm³
- 0.90 ± 0.10
- Drying Time, h
- ~18-24
- Packing
- A: 7 kg + B: 1 kg (total 8 kg)
- Consumption, kg/m²
- 0.150-0.200
Technical Specifications
| Parameter | Value |
|---|---|
| Density, g/cm³ | 0.90 ± 0.10 |
| Drying Time, h | ~18-24 |
| Packing | A: 7 kg + B: 1 kg (total 8 kg) |
| Consumption, kg/m² | 0.150-0.200 |
| Viscosity, mPa·s | 60-100 |
| Gloss (60° angle), Class G1 | > 60 |
| Mixing Ratio, % | A/B: 7/1 |
| Application Equipment | Applied with brush or roller |
Product Description
T-GLASS is a two-component product used for waterproofing and also for decorative purposes. It adheres excellently to surfaces such as glass, mosaic, tiles, porcelain, ceramics, marble, granite, natural stone, wood, concrete, screed, galvanised sheet and aluminium, has high resistance to atmospheric conditions and can be produced transparent or coloured; in addition to its excellent water resistance, it has high chemical and physical resistance. It is not affected by UV and outdoor weather conditions. It does not yellow, fade or peel over time. It is easily applied without disturbing or damaging the existing coating, especially for solving waterproofing problems on floors such as balconies, terraces, bathrooms and pools.
Advantages
- UV-resistant.
- Does not yellow.
- Easy to apply because it is single-component.
- Dries quickly.
- By increasing water impermeability, it prevents cracks that may form in plasters as a result of freezing.
- Protects concrete against atmospheric effects that can penetrate it in the form of salts or gases.
- Reduces dirt retention, and the colour of the concrete does not change under the effect of rain.
Application Areas
- On glass, glass blocks, mosaic, tile mosaic,
- On tile, ceramic, marble, granite, natural stone and porcelain surfaces
- On pressed bricks,
- On wooden surfaces,
- On balconies, terraces, bathrooms, kitchens and stone-clad exterior facades.
- In decorative pools clad with ceramics or glass mosaic. Helps prevent dusting on absorbent surfaces.
Application
Before application, the two components must be mixed thoroughly in the given proportions by weight. The two components can only undergo the desired reaction once they have formed a homogeneous and complete mixture.
Packaging & storage
Packaging
A: 7 kg + B: 1 kg (total 8 kg)
Where it is used
Used together with
- FLOOR AL S · Two-Component Polyurethane-Based Aliphatic Top Coat Paint
- POX 007 · Ultra-Clear, High-Gloss Casting Epoxy Resin
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
Two-Component, UV-Resistant Transparent Waterproofing Material with High Chemical and Physical Resistance Typical specifications: Density, g/cm³: 0.90 ± 0.10; Drying Time, h: ~18-24; Packing: A: 7 kg + B: 1 kg (total 8 kg). KORKİMYA supplies T GLASS in A: 7 kg + B: 1 kg (total 8 kg).
T-GLASS is a two-component product used for waterproofing and also for decorative purposes. It adheres excellently to surfaces such as glass, mosaic, tiles, porcelain, ceramics, marble, granite, natural stone, wood, concrete, screed, galvanised sheet and aluminium, has high resistance to atmospheric conditions and can be produced transparent or coloured; in addition to its excellent water resistance, it has high chemical and physical resistance. It is not affected by UV and outdoor weather conditions. It does not yellow, fade or peel over time. It is easily applied without disturbing or damaging the existing coating, especially for solving waterproofing problems on floors such as balconies, terraces, bathrooms and pools.
Two-Component, UV-Resistant Transparent Waterproofing Material with High Chemical and Physical Resistance
- Category
- WATERPROOFING MATERIALS
Frequently asked questions
What are the key specifications of T GLASS?
The recorded supply specification for T GLASS includes Density, g/cm³: 0.90 ± 0.10; Drying Time, h: ~18-24; Packing: A: 7 kg + B: 1 kg (total 8 kg); Consumption, kg/m²: 0.150-0.200; Viscosity, mPa·s: 60-100. The full table is listed on this page.
How is T GLASS packaged and stored?
Packaging: A: 7 kg + B: 1 kg (total 8 kg).
Is T GLASS KKDİK registered, and which documents are available?
Yes. T GLASS supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com