- Density, g/cm³
- 1.40
- Drying Time, h
- ~24
- Packing
- A: 27 kg + B: 3 kg (total 30 kg)
- Consumption, kg/m²
- 0.150-0.200
Technical Specifications
| Parameter | Value |
|---|---|
| Density, g/cm³ | 1.40 |
| Drying Time, h | ~24 |
| Packing | A: 27 kg + B: 3 kg (total 30 kg) |
| Consumption, kg/m² | 0.150-0.200 |
| Mixing Ratio, % | A/B: 9/1 |
| Shelf Life, months | 12 |
| Application Equipment | - |
Product Description
FLOOR AL S is a polyurethane-based, two-component, coloured, UV-resistant surface protection material with high abrasion and chemical resistance.
Application Areas
- On polyurea coatings
- In children's playgrounds
- In fitness centres
- On sports field floors
- In outdoor and indoor swimming pools
- On PU, PUR and epoxy-coated surfaces
- In hospitals
- Used on surfaces that require UV resistance.
Advantages
- Easy to apply.
- Completely resistant to outdoor conditions.
- Not affected by UV rays.
- Protects the applied surface against water, rain and sunlight and prevents its wear.
- Can be used to waterproof all kinds of horizontal and vertical surfaces.
- Covers cracks, substrate defects and joint points, forming a smooth, seamless layer.
- Ideal for terraces, balconies and wet floors.
- Easy to clean, dries quickly, does not dust.
- Long-lasting; does not lose its flexibility or change colour.
- High scratch and abrasion resistance.
- Semi-elastic.
- High abrasion and chemical resistance.
- Easy to apply.
- Contains no bacteria.
- Does not dust.
Application
FLOOR AL S should be applied with a brush or roller. After drying, it should be applied in one or more coats until a homogeneous glossy film remains on the surface.
Waiting Time Between Coats
Between coats of FLOOR AL S, wait 14-16 hours at 20ºC; for the final coats to be applied on top, wait at least 24 and at most 48 hours.
Packaging & storage
Packaging
A: 27 kg + B: 3 kg (total 30 kg)
Shelf Life
12 months
Where it is used
Used together with
- T GLASS · Two-Component, UV-Resistant Transparent Waterproofing Material with High Chemical and Physical Resistance
- POX 007 · Ultra-Clear, High-Gloss Casting Epoxy Resin
- FLOOR M200 · Two-Component Polyurethane Resin-Based Pore-Filling Putty
- FLOOR AF · Two-Component Polyurethane-Based Self-Levelling Floor Coating for Athletics Tracks
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
Two-Component Polyurethane-Based Aliphatic Top Coat Paint Typical specifications: Density, g/cm³: 1.40; Drying Time, h: ~24; Packing: A: 27 kg + B: 3 kg (total 30 kg). KORKİMYA supplies FLOOR AL S in A: 27 kg + B: 3 kg (total 30 kg). Shelf life: 12 months.
FLOOR AL S is a polyurethane-based, two-component, coloured, UV-resistant surface protection material with high abrasion and chemical resistance.
Two-Component Polyurethane-Based Aliphatic Top Coat Paint
- Category
- WATERPROOFING MATERIALS
Frequently asked questions
What are the key specifications of FLOOR AL S?
The recorded supply specification for FLOOR AL S includes Density, g/cm³: 1.40; Drying Time, h: ~24; Packing: A: 27 kg + B: 3 kg (total 30 kg); Consumption, kg/m²: 0.150-0.200; Mixing Ratio, %: A/B: 9/1. The full table is listed on this page.
How is FLOOR AL S packaged and stored?
Packaging: A: 27 kg + B: 3 kg (total 30 kg). Shelf life: 12 months.
Is FLOOR AL S KKDİK registered, and which documents are available?
Yes. FLOOR AL S supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com