- Density, g/cm³
- 1.42
- Drying Time, h
- ~24
- Packing
- A: 21 kg + B: 3 kg (total 24 kg)
- Consumption, kg/m²
- 0.700-1.00
Technical Specifications
| Parameter | Value |
|---|---|
| Density, g/cm³ | 1.42 |
| Drying Time, h | ~24 |
| Packing | A: 21 kg + B: 3 kg (total 24 kg) |
| Consumption, kg/m² | 0.700-1.00 |
| Hardness, Shore A | 65-70 |
| Tensile Strength, N/mm² | 4 |
| Mixing Ratio, % | A/B: 7/1 |
| Shelf Life, months | 12 |
Product Description
FLOOR M 200 is a two-component, polyurethane-based, highly thixotropic, 100% solids, solvent-free putty with mastic properties. It cures at ambient temperature by chemical reaction.
Advantages
- 100% solids. Solvent-free.
- Flexible.
- Thixotropic and easy to apply.
Areas of Use
FLOOR M 200 is a flexible putty used to ensure the impermeability of sports floors formed by casting rubber granules in situ or by laying the granules after they have been made into mats, by filling their pores and voids, and to make the rubber mat floor suitable for a PU self-levelling coating.
Application
Maximum ambient humidity should be 80%. Ambient temperature should be between 10-30 °C. In open areas it should not rain 24 hours before the start of application, during application or 24 hours after application. The floor temperature should be 3 °C above the current dew point. The temperature of FLOOR M 200 should be between 15-25 °C. Immediately after making sure that the A and B components are mixed homogeneously, FLOOR M 200 is poured onto the prepared floor and spread with a metal or rubber squeegee. During spreading, pressure is applied with the squeegee to scrape off excess FLOOR M 200 from the surface and to ensure that the pores are thoroughly filled. As two-component polyurethane systems are more reactive to moisture, contact of the surface with water must be prevented for 24 hours after application. Otherwise, foaming may occur.
Packaging & storage
Packaging
A: 21 kg + B: 3 kg (total 24 kg)
Shelf Life
12 months
Where it is used
Used together with
- FLOOR AL S · Two-Component Polyurethane-Based Aliphatic Top Coat Paint
- FLOOR AF · Two-Component Polyurethane-Based Self-Levelling Floor Coating for Athletics Tracks
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
Two-Component Polyurethane Resin-Based Pore-Filling Putty Typical specifications: Density, g/cm³: 1.42; Drying Time, h: ~24; Packing: A: 21 kg + B: 3 kg (total 24 kg). KORKİMYA supplies FLOOR M200 in A: 21 kg + B: 3 kg (total 24 kg). Shelf life: 12 months.
FLOOR M 200 is a two-component, polyurethane-based, highly thixotropic, 100% solids, solvent-free putty with mastic properties. It cures at ambient temperature by chemical reaction.
Two-Component Polyurethane Resin-Based Pore-Filling Putty
- Category
- SPORTS FLOOR COATINGS
Frequently asked questions
What is FLOOR M200 used for?
FLOOR M 200 is a flexible putty used to ensure the impermeability of sports floors formed by casting rubber granules in situ or by laying the granules after they have been made into mats, by filling their pores and voids, and to make the rubber mat floor suitable for a PU self-levelling coating.
What are the key specifications of FLOOR M200?
The recorded supply specification for FLOOR M200 includes Density, g/cm³: 1.42; Drying Time, h: ~24; Packing: A: 21 kg + B: 3 kg (total 24 kg); Consumption, kg/m²: 0.700-1.00; Hardness, Shore A: 65-70. The full table is listed on this page.
How is FLOOR M200 packaged and stored?
Packaging: A: 21 kg + B: 3 kg (total 24 kg). Shelf life: 12 months.
Is FLOOR M200 KKDİK registered, and which documents are available?
Yes. FLOOR M200 supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com