- Density, g/cm³
- 1.30
- Drying Time, h
- ~24-48
- Wear Resistance, mg
- 20
- Packing
- A: 20 kg + B: 5 kg (total 25 kg)
Technical Specifications
| Parameter | Value |
|---|---|
| Density, g/cm³ | 1.30 |
| Drying Time, h | ~24-48 |
| Wear Resistance, mg | 20 |
| Packing | A: 20 kg + B: 5 kg (total 25 kg) |
| Consumption, kg/m² | 1.30 kg / 1 mm |
| Viscosity, mPa·s | 1000-1200 |
| Hardness, Shore A | 65-70 |
| Elongation, % | 90 |
| Mixing Ratio, % | A/B: 4/1 |
| Shelf Life, months | 12 |
Product Description
FLOOR SL is a two-component, polyurethane-based, self-levelling, solvent-free floor coating. It cures by chemical reaction to form a medium-hard, abrasion-resistant monolithic coating that requires no joints. It is easy to clean and maintain. Thanks to its elastomeric structure, it bridges cracks.
Advantages
- Resistant to friction and abrasion
- Has an elastic structure
- Creates a jointless surface
- Easy to clean, hygienic, requires no maintenance for a long time
- Easy to apply
- Solvent-free
Application Areas
- Factories, cold stores, warehouses
- Shopping centres, workshops
- Aircraft hangars, schools
- On EPDM sheets in indoor sports halls
- Hospitals, pharmaceutical industry
- Food industry, laboratories
- Car parks, areas with forklift traffic
Application
Immediately after making sure that the A and B components are mixed homogeneously, FLOOR SL is poured in a suitable quantity onto the prepared floor and spread with a notched trowel selected according to the desired thickness. Spiked roller application starts within 5-10 minutes after spreading is completed. Spiked rolling is continued until all the air trapped in the material has escaped. Paying attention to when the material starts to lose its fluidity, spiked rolling is stopped after a suitable time. If spiked rolling is continued, there is a risk of spiked roller marks remaining on the surface.
Packaging & storage
Packaging
A: 20 kg + B: 5 kg (total 25 kg)
Shelf Life
12 months
Where it is used
Used together with
- POX 020 · Two-Component, Reaction-Curing Epoxy Self-Levelling Coating
- POX 030 · Two-Component, Epoxy-Based High-Strength Intermediate Coating
- PUR 021 · Two-Component Polyurethane-Based Self-Levelling Floor Coating
- FLOOR AF · Two-Component Polyurethane-Based Self-Levelling Floor Coating for Athletics Tracks
- POX 040 · Two-Component, Reaction-Curing, Epoxy Resin-Based Epoxy Top Coat Floor and Wall Paint Cured with Polyamide Hardener
- POX 050 · Orange Peel Textured Epoxy Floor Coating Material
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
Two-Component Flexible Self-Levelling Coating Developed for Indoor Sports Halls Typical specifications: Density, g/cm³: 1.30; Drying Time, h: ~24-48; Wear Resistance, mg: 20. KORKİMYA supplies FLOOR SL in A: 20 kg + B: 5 kg (total 25 kg). Shelf life: 12 months.
FLOOR SL is a two-component, polyurethane-based, self-levelling, solvent-free floor coating. It cures by chemical reaction to form a medium-hard, abrasion-resistant monolithic coating that requires no joints. It is easy to clean and maintain. Thanks to its elastomeric structure, it bridges cracks.
Two-Component Flexible Self-Levelling Coating Developed for Indoor Sports Halls
- Category
- SPORTS FLOOR COATINGS
Frequently asked questions
What are the key specifications of FLOOR SL?
The recorded supply specification for FLOOR SL includes Density, g/cm³: 1.30; Drying Time, h: ~24-48; Wear Resistance, mg: 20; Packing: A: 20 kg + B: 5 kg (total 25 kg); Consumption, kg/m²: 1.30 kg / 1 mm. The full table is listed on this page.
How is FLOOR SL packaged and stored?
Packaging: A: 20 kg + B: 5 kg (total 25 kg). Shelf life: 12 months.
Is FLOOR SL KKDİK registered, and which documents are available?
Yes. FLOOR SL supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com