PUR 021

Two-Component Polyurethane-Based Self-Levelling Floor Coating

AI-generated illustrative studio still-life for Floor coatings, on a transparent background: a concrete slab with an illustrative floor coating and a smaller satin-coated coupon. Not a photograph of an actual project, job site, or product package.
Illustrative application image; not a photograph of the actual product or package.
Density, g/cm³
1.25 ± 0.05
Drying Time, h
~24
Compressive Strength, N/mm²
30
Packing
A: 16 kg + B: 4 kg (total 20 kg)

Technical Specifications

ParameterValue
Density, g/cm³1.25 ± 0.05
Drying Time, h~24
Compressive Strength, N/mm²30
PackingA: 16 kg + B: 4 kg (total 20 kg)
Consumption, kg/m²1.2 kg / 1 mm
Viscosity, mPa·s1400-1600
Hardness, Shore D55 ± 5
Flexural Strength, N/mm²5.8
Mixing Ratio, %A/B: 4/1
Shelf Life, months12

Product Description

PUR 021 is a two-component, polyurethane-based, self-levelling, solvent-free floor coating. It cures by chemical reaction to form a medium-hard, abrasion-resistant, jointless monolithic coating. It is easy to clean and maintain. Thanks to its elastomeric structure it bridges cracks.

Advantages

  • Resistant to friction and abrasion.
  • Has an elastic structure.
  • Creates a jointless surface.
  • Easy to clean, hygienic, requires no maintenance for a long time.
  • Easy to apply.
  • Solvent-free.

Application Areas

  • Factories, cold stores, warehouses
  • Shopping centres, workshops
  • Aircraft hangars, schools
  • On EPDM sheets in indoor sports halls
  • In hospitals and the pharmaceutical industry
  • In the food industry and laboratories
  • In car parks and areas with forklift traffic

Application

Immediately after making sure that components A and B are mixed homogeneously, PUR 021 is poured in an appropriate amount onto the prepared substrate and spread over the floor with a notched trowel selected according to the desired thickness. PUR 021 is applied with a trowel. Spiked roller application is started within 5-10 minutes immediately after spreading is completed. Spiked rolling is continued until all the air trapped in the material has been released. Paying attention to the moment the material begins to lose its flowability, spiked rolling is stopped after a suitable time. If spiked rolling is continued, there is a risk of spiked roller marks remaining on the surface.

Packaging & storage

Packaging

A: 16 kg + B: 4 kg (total 20 kg)

Shelf Life

12 months

Where it is used

Used together with

  • POX 020 · Two-Component, Reaction-Curing Epoxy Self-Levelling Coating
  • POX 030 · Two-Component, Epoxy-Based High-Strength Intermediate Coating
  • FLOOR SL · Two-Component Flexible Self-Levelling Coating Developed for Indoor Sports Halls
  • AQUATEX · Two-Component, Solvent-Based Epoxy Primer and Impregnation System
  • POX 040 · Two-Component, Reaction-Curing, Epoxy Resin-Based Epoxy Top Coat Floor and Wall Paint Cured with Polyamide Hardener
  • POX 050 · Orange Peel Textured Epoxy Floor Coating Material
  • FLOOR AF · Two-Component Polyurethane-Based Self-Levelling Floor Coating for Athletics Tracks

Documents

Technical data sheet (TDS)

Review the recorded specifications, packaging and storage information.

View technical data sheet ↗

Safety & lot documents

Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.

SDS available on request.

Request Sample

Leave your email. Our sales team will get in touch about a sample and the certificate of analysis.

Response time · 24 hours

Product Information

Two-Component Polyurethane-Based Self-Levelling Floor Coating Typical specifications: Density, g/cm³: 1.25 ± 0.05; Drying Time, h: ~24; Compressive Strength, N/mm²: 30. KORKİMYA supplies PUR 021 in A: 16 kg + B: 4 kg (total 20 kg). Shelf life: 12 months.

PUR 021 is a two-component, polyurethane-based, self-levelling, solvent-free floor coating. It cures by chemical reaction to form a medium-hard, abrasion-resistant, jointless monolithic coating. It is easy to clean and maintain. Thanks to its elastomeric structure it bridges cracks.

Two-Component Polyurethane-Based Self-Levelling Floor Coating

Category
FLOOR COATINGS

Frequently asked questions

What are the key specifications of PUR 021?

The recorded supply specification for PUR 021 includes Density, g/cm³: 1.25 ± 0.05; Drying Time, h: ~24; Compressive Strength, N/mm²: 30; Packing: A: 16 kg + B: 4 kg (total 20 kg); Consumption, kg/m²: 1.2 kg / 1 mm. The full table is listed on this page.

How is PUR 021 packaged and stored?

Packaging: A: 16 kg + B: 4 kg (total 20 kg). Shelf life: 12 months.

Is PUR 021 KKDİK registered, and which documents are available?

Yes. PUR 021 supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.

Related Products

Last updated: 10/11/2026

MSDS Available on Request · Export Registered · korkimya.com

New products, capacity news, and KORKİMYA announcements - straight to your inbox.

Be the first to hear about new hydrocarbon resin launches, certifications, and industry events. No spam.

By subscribing, you accept our Privacy Policy.

PUR 021