POX 040
Two-Component, Reaction-Curing, Epoxy Resin-Based Epoxy Top Coat Floor and Wall Paint Cured with Polyamide Hardener
- Density, g/cm³
- 1.35
- Drying Time, h
- ~24-48
- Compressive Strength, N/mm²
- ~55
- Packing
- A: 20 kg + B: 4 kg (total 24 kg)
Technical Specifications
| Parameter | Value |
|---|---|
| Density, g/cm³ | 1.35 |
| Drying Time, h | ~24-48 |
| Compressive Strength, N/mm² | ~55 |
| Packing | A: 20 kg + B: 4 kg (total 24 kg) |
| Consumption, kg/m² | 0.400-0.600 |
| Viscosity, mPa·s | 1200-1500 |
| Hardness, Shore D | 80±5 |
| Bending Strength, N/mm² | ~25 |
| Mixing Ratio, % | A/B: 5/1 |
| Shelf Life, months | 12 |
Product Description
POX 040 is a two-component top coat paint that can be applied by roller. Its distinctive features are high surface hardness, water and chemical resistance, high mechanical resistance and easy cleaning.
Advantages
- Dust-free
- Forms a hard film.
- Forms a seamless surface
- Easy to clean, hygienic, requires no maintenance for a long time
- Easy to apply
- Solvent-free
Areas of Use
- Factories, warehouses
- Shopping centres, workshops
- Aircraft hangars, schools
- Hospitals, pharmaceutical sector
- Chemical plants, food sector
- Laboratories, car parks
- Treatment plants, areas where heavy forklifts and corrosive chemicals are used
Application
POX 040 is supplied in ready-to-use sets according to the mixing ratios. Before application, care must be taken that the material temperature is at least +15°C. Component A is mixed with an industrial mixer fitted with a suitable mixing paddle at 300-400 rpm, the hardener component B is added and mixing is continued. Care must be taken that the material at the walls and bottom of the container is mixed very thoroughly and that the mixture is homogeneous. Otherwise, unmixed A or B components may form a soft, tacky film on the surface after application and cause a defective application. An important point here is that the mixing paddle touches the bottom of the container.
This will minimise air entrainment into the mixture and give a sounder, problem-free surface. The mixture is then transferred to another clean container and mixed for a further 2-3 minutes. No more material should be prepared than can be applied within the pot life.
Packaging & storage
Packaging
A: 20 kg + B: 4 kg (total 24 kg)
Shelf Life
12 months
Where it is used
Used together with
- POX 050 · Orange Peel Textured Epoxy Floor Coating Material
- PUR 890 · Antistatic Polyurea Floor Coating System
- AQUATEX · Two-Component, Solvent-Based Epoxy Primer and Impregnation System
- POX 020 · Two-Component, Reaction-Curing Epoxy Self-Levelling Coating
- PUR 021 · Two-Component Polyurethane-Based Self-Levelling Floor Coating
- POX 030 · Two-Component, Epoxy-Based High-Strength Intermediate Coating
- FLOOR SL · Two-Component Flexible Self-Levelling Coating Developed for Indoor Sports Halls
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
Two-Component, Reaction-Curing, Epoxy Resin-Based Epoxy Top Coat Floor and Wall Paint Cured with Polyamide Hardener Typical specifications: Density, g/cm³: 1.35; Drying Time, h: ~24-48; Compressive Strength, N/mm²: ~55. KORKİMYA supplies POX 040 in A: 20 kg + B: 4 kg (total 24 kg). Shelf life: 12 months.
POX 040 is a two-component top coat paint that can be applied by roller. Its distinctive features are high surface hardness, water and chemical resistance, high mechanical resistance and easy cleaning.
Two-Component, Reaction-Curing, Epoxy Resin-Based Epoxy Top Coat Floor and Wall Paint Cured with Polyamide Hardener
- Category
- FLOOR COATINGS
Frequently asked questions
What are the key specifications of POX 040?
The recorded supply specification for POX 040 includes Density, g/cm³: 1.35; Drying Time, h: ~24-48; Compressive Strength, N/mm²: ~55; Packing: A: 20 kg + B: 4 kg (total 24 kg); Consumption, kg/m²: 0.400-0.600. The full table is listed on this page.
How is POX 040 packaged and stored?
Packaging: A: 20 kg + B: 4 kg (total 24 kg). Shelf life: 12 months.
Is POX 040 KKDİK registered, and which documents are available?
Yes. POX 040 supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com