- Density, g/cm³
- 1.0±0.05
- Drying Time, h
- ~24
- Packing
- A: 15 kg + B: 5 kg (total 20 kg)
- Consumption, kg/m²
- 0.250
Technical Specifications
| Parameter | Value |
|---|---|
| Density, g/cm³ | 1.0±0.05 |
| Drying Time, h | ~24 |
| Packing | A: 15 kg + B: 5 kg (total 20 kg) |
| Consumption, kg/m² | 0.250 |
| Mixing Ratio, % | A/B: 3/1 |
| Viscosity, mPa·s | 200-300 |
| Shelf Life, months | 12 |
| Application Equipment | Applied with brush and roller |
Product Description
AQUATEX is a two-component, water-based, unfilled epoxy concrete impregnation primer.
Areas of Use
- Hospitals (especially operating theatre walls)
- Hygienic environments such as laboratories
- Industries such as food and chemicals
- Drinking water tanks, terminals
- Shopping centres, schools
- Tunnels and enclosed car parks
Advantages
- Easy to apply.
- Contains no fillers or pigments.
- Thanks to its low viscosity, it easily penetrates capillary voids.
- Forms an adhesion bridge for water-based epoxy systems to be applied on the concrete surface.
- Prevents water and oil from permeating the floor.
- Its long pot life makes application easy.
- Can be used safely on damp surfaces.
Application
- The surface must be cleaned of all dirt that could impair adhesion.
- It must be confirmed that the substrate is dry.
- The temperature of the surface to be treated must be between +5°C and +30°C.
- Component B of AQUATEX is added slowly into component A and mixed using a 300 rpm mixer.
- Mixing is continued for an average of 4 minutes until a homogeneous mixture is obtained.
- AQUATEX is applied by brush or roller in one or more coats until, after drying, a homogeneous, glossy, very thin film remains on the surface.
Packaging & storage
Packaging
A: 15 kg + B: 5 kg (total 20 kg)
Shelf Life
12 months
Where it is used
Used together with
- POX 020 · Two-Component, Reaction-Curing Epoxy Self-Levelling Coating
- POX 040 · Two-Component, Reaction-Curing, Epoxy Resin-Based Epoxy Top Coat Floor and Wall Paint Cured with Polyamide Hardener
- POX 050 · Orange Peel Textured Epoxy Floor Coating Material
- PUR 021 · Two-Component Polyurethane-Based Self-Levelling Floor Coating
- PROOF 2K Y · Two-Component Polyurethane-Based Insulation Membrane Developed for Pool Waterproofing
- POX 003 · Two-Component Epoxy Primer with Extra Moisture Tolerance
- POX 006 · Two-Component, Solvent-Based Epoxy Primer and Impregnation System
- POX 070 · Two-Component, Solvent-Free Epoxy Resin-Based Antistatic Epoxy Floor Coating System
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
Two-Component, Solvent-Based Epoxy Primer and Impregnation System Typical specifications: Density, g/cm³: 1.0±0.05; Drying Time, h: ~24; Packing: A: 15 kg + B: 5 kg (total 20 kg). KORKİMYA supplies AQUATEX in A: 15 kg + B: 5 kg (total 20 kg). Shelf life: 12 months.
AQUATEX is a two-component, water-based, unfilled epoxy concrete impregnation primer.
Two-Component, Solvent-Based Epoxy Primer and Impregnation System
- Category
- PRIMERS
Frequently asked questions
What are the key specifications of AQUATEX?
The recorded supply specification for AQUATEX includes Density, g/cm³: 1.0±0.05; Drying Time, h: ~24; Packing: A: 15 kg + B: 5 kg (total 20 kg); Consumption, kg/m²: 0.250; Mixing Ratio, %: A/B: 3/1. The full table is listed on this page.
How is AQUATEX packaged and stored?
Packaging: A: 15 kg + B: 5 kg (total 20 kg). Shelf life: 12 months.
Is AQUATEX KKDİK registered, and which documents are available?
Yes. AQUATEX supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com