- Density, g/cm³
- 1.20
- Drying Time, h
- ~24
- Compressive Strength, N/mm²
- ~55
- Packing
- A: 20 kg + B: 5 kg (total 25 kg)
Technical Specifications
| Parameter | Value |
|---|---|
| Density, g/cm³ | 1.20 |
| Drying Time, h | ~24 |
| Compressive Strength, N/mm² | ~55 |
| Packing | A: 20 kg + B: 5 kg (total 25 kg) |
| Consumption, kg/m² | 1.2 kg / 1 mm |
| Viscosity, mPa·s | 1200-1500 |
| Hardness, Shore D | 80 ± 5 |
| Flexural Strength, N/mm² | ~25 |
| Mixing Ratio, % | A/B: 4/1 |
| Shelf Life, months | 12 |
Product Description
POX 070 is the conductive (charge-carrying) top coat of a two-component, solvent-free, epoxy resin-based antistatic epoxy floor coating system.
Application Areas
- Hospitals
- Operating theatres
- Laboratories
- Factories
- Industrial facilities where floor dusting affects production, such as the textile industry
- Laboratories
Advantages
- Electrostatically conductive.
- Easy to apply.
- Forms a hard film.
- The film surface is glossy and smooth and prevents water and oil penetration.
- Easy to clean.
- Does not harbour bacteria.
- Does not create dust.
Application
Observing the mixing ratios, components A and B must be mixed with a low-speed mixer for at least 3-4 minutes until a homogeneous mixture is obtained. After mixing, the material is ready for application.
- Application below 10°C and in very humid environments should be avoided.
Packaging & storage
Packaging
A: 20 kg + B: 5 kg (total 25 kg)
Shelf Life
12 months
Where it is used
Used together with
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
Two-Component, Solvent-Free Epoxy Resin-Based Antistatic Epoxy Floor Coating System Typical specifications: Density, g/cm³: 1.20; Drying Time, h: ~24; Compressive Strength, N/mm²: ~55. KORKİMYA supplies POX 070 in A: 20 kg + B: 5 kg (total 25 kg). Shelf life: 12 months.
POX 070 is the conductive (charge-carrying) top coat of a two-component, solvent-free, epoxy resin-based antistatic epoxy floor coating system.
Two-Component, Solvent-Free Epoxy Resin-Based Antistatic Epoxy Floor Coating System
- Category
- FLOOR COATINGS
Frequently asked questions
What are the key specifications of POX 070?
The recorded supply specification for POX 070 includes Density, g/cm³: 1.20; Drying Time, h: ~24; Compressive Strength, N/mm²: ~55; Packing: A: 20 kg + B: 5 kg (total 25 kg); Consumption, kg/m²: 1.2 kg / 1 mm. The full table is listed on this page.
How is POX 070 packaged and stored?
Packaging: A: 20 kg + B: 5 kg (total 25 kg). Shelf life: 12 months.
Is POX 070 KKDİK registered, and which documents are available?
Yes. POX 070 supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com