- Density, g/cm³
- 1.08
- Drying Time, h
- ~24
- Packing
- A: 12 kg + B: 6 kg (total 18 kg)
- Consumption, kg/m²
- 0.300-0.500
Technical Specifications
| Parameter | Value |
|---|---|
| Density, g/cm³ | 1.08 |
| Drying Time, h | ~24 |
| Packing | A: 12 kg + B: 6 kg (total 18 kg) |
| Consumption, kg/m² | 0.300-0.500 |
| Mixing Ratio, % | A/B: 100/50 |
| Hardness, Shore D | 75-80 |
| Shelf Life, months | 12 |
| Application Equipment | Applied with brush and roller |
Product Description
POX 003 is an epoxy-based, two-component, low-viscosity, solvent-free primer and impregnation material with high adhesion capability to damp concrete and mineral surfaces.
Application Areas
- Chemical and pharmaceutical industry
- Food and beverage industry
- Laboratories
- Hospitals
- Textile industry and similar,
- Industrial facilities where floor dusting affects production
- Used as a primer/intermediate coat on concrete floors of terraces and roofs.
Advantages
- Easy to apply.
- Forms a hard film.
- Contains no fillers or pigments.
- The film surface is glossy and smooth and prevents water and oil permeation.
- Provides adhesion strength on damp surfaces.
- Easy to clean.
- Does not harbour bacteria; dust-free.
Application
- The surface must be free of all dirt that would impair adhesion.
- It must be verified that the floor is dry.
- The temperature of the surface to be treated must be between +5°C and +30°C.
- Component B of POX 003 is added slowly to component A and mixed with a 300 rpm mixer.
- Mixing continues for an average of 4 minutes until a homogeneous mixture is obtained.
Packaging & storage
Packaging
A: 12 kg + B: 6 kg (total 18 kg)
Shelf Life
12 months
Where it is used
Used together with
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
Two-Component Epoxy Primer with Extra Moisture Tolerance Typical specifications: Density, g/cm³: 1.08; Drying Time, h: ~24; Packing: A: 12 kg + B: 6 kg (total 18 kg). KORKİMYA supplies POX 003 in A: 12 kg + B: 6 kg (total 18 kg). Shelf life: 12 months.
POX 003 is an epoxy-based, two-component, low-viscosity, solvent-free primer and impregnation material with high adhesion capability to damp concrete and mineral surfaces.
Two-Component Epoxy Primer with Extra Moisture Tolerance
- Category
- PRIMERS
Frequently asked questions
What are the key specifications of POX 003?
The recorded supply specification for POX 003 includes Density, g/cm³: 1.08; Drying Time, h: ~24; Packing: A: 12 kg + B: 6 kg (total 18 kg); Consumption, kg/m²: 0.300-0.500; Mixing Ratio, %: A/B: 100/50. The full table is listed on this page.
How is POX 003 packaged and stored?
Packaging: A: 12 kg + B: 6 kg (total 18 kg). Shelf life: 12 months.
Is POX 003 KKDİK registered, and which documents are available?
Yes. POX 003 supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com