- Density, g/cm³
- 1.35
- Drying Time, h
- ~4-6
- Packing, kg
- 70
- Consumption, kg/m²
- 0.400-0.450
Technical Specifications
| Parameter | Value |
|---|---|
| Density, g/cm³ | 1.35 |
| Drying Time, h | ~4-6 |
| Packing, kg | 70 |
| Consumption, kg/m² | 0.400-0.450 |
| Solid Content, % | 80 |
| Hardness, Shore A | 35-40 |
| Shelf Life, months | 12 |
| Application Equipment | Rubber squeegee |
Product Description
FLEX RC is a pore-filling material used on concrete or asphalt floors to increase the adhesion of the upper layers, close the pores and obtain a level surface.
Advantages
- Ready to use, can be easily applied with a brush or roller.
- Low labour cost.
- Effective water vapour permeability.
- Highly resistant to UV rays.
- Retains its flexibility at low temperatures.
- Can be painted over
Application
For FLEX RC application, new hot asphalt surfaces must have cured for a minimum of 14 days and new concrete surfaces for a minimum of 28 days. After mortar residues etc. on the cured surface have been removed by light sandblasting or brushing, the selected primer is applied. Loose particles such as old paint, dirt and dust on old concrete and cement plaster surfaces are removed by sandblasting, scraping or brushing. Oil and grease residues are cleaned with detergent water; if neutralisation is required, the surface is wiped with a 3-4% hydrochloric acid or acetic acid solution and washed with pressurised water. Before FLEX RC is applied, care must be taken that the floor is completely dry.
Priming asphalt surfaces with FLEX AST is required if the existing asphalt is exposed to very severe weather conditions. When FLEX RC is applied to new concrete surfaces, FLEX AST is required for adhesion.
Packaging & storage
Packaging
70 kg
Shelf Life
12 months
Where it is used
Used together with
- FLEX AST · One-Component, Water-Based Elastomeric Resin Primer
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
Acrylic Resin-Based Pore Filler with Thixotropic Properties Typical specifications: Density, g/cm³: 1.35; Drying Time, h: ~4-6; Packing, kg: 70. KORKİMYA supplies FLEX RC in 70 kg. Shelf life: 12 months.
FLEX RC is a pore-filling material used on concrete or asphalt floors to increase the adhesion of the upper layers, close the pores and obtain a level surface.
Acrylic Resin-Based Pore Filler with Thixotropic Properties
- Category
- SPORTS FLOOR COATINGS
Frequently asked questions
What are the key specifications of FLEX RC?
The recorded supply specification for FLEX RC includes Density, g/cm³: 1.35; Drying Time, h: ~4-6; Packing, kg: 70; Consumption, kg/m²: 0.400-0.450; Solid Content, %: 80. The full table is listed on this page.
How is FLEX RC packaged and stored?
Packaging: 70 kg. Shelf life: 12 months.
Is FLEX RC KKDİK registered, and which documents are available?
Yes. FLEX RC supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com