- Density, g/cm³
- 1.36
- Drying Time, h
- ~4-6
- Packing, kg
- 20
- Consumption, kg/m²
- 0.25
Technical Specifications
| Parameter | Value |
|---|---|
| Density, g/cm³ | 1.36 |
| Drying Time, h | ~4-6 |
| Packing, kg | 20 |
| Consumption, kg/m² | 0.25 |
| Solid Content, % | 90 |
| Hardness, Shore A | 40-45 |
| Shelf Life, months | 12 |
| Application Equipment | Applied with brush or roller |
Product Description
An acrylic resin-based, cold-applied road marking paint with high hiding power, which does not change colour over time, adheres well to the surfaces it is applied to, is resistant to abrasion and friction, has a long service life and high UV resistance.
Areas of Use
On all kinds of urban and intercity highways, pedestrian crossings, airports and similar areas, on asphalt and concrete surfaces, it provides good performance and durability, especially at pedestrian crossings where traffic safety is important and under very heavy vehicle and pedestrian traffic. Thanks to its fast drying after application, it allows pedestrian and vehicle traffic to resume.
Application Method
Before applying any of the tennis court systems, new hot asphalt surfaces must have cured for a minimum of 14 days and new concrete surfaces for a minimum of 28 days. Loose particles such as old paint, dirt and dust, as well as oil and grease residues, must be removed from the surface. Before applying LINE PAINT, make sure that the floor is completely dry. LINE PAINT can be applied to the floor with a brush, roller, airless spray gun or special marking equipment. The areas where the lines are to be marked should be masked with paper tape. Before applying LINE PAINT, one coat of FLEX AST primer must be applied. In this way, LINE PAINT applied on top is prevented from spreading outside the masked area. One coat generally gives the best result. If the floor is hot, it should be moistened with a water spray for a good application. Water must not be allowed to collect on the applied floor.
Packaging & storage
Packaging
20 kg
Shelf Life
12 months
Where it is used
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
One-Component Flexible Line Marking Paint for Sports Surfaces Typical specifications: Density, g/cm³: 1.36; Drying Time, h: ~4-6; Packing, kg: 20. KORKİMYA supplies LINE PAINT in 20 kg. Shelf life: 12 months.
An acrylic resin-based, cold-applied road marking paint with high hiding power, which does not change colour over time, adheres well to the surfaces it is applied to, is resistant to abrasion and friction, has a long service life and high UV resistance.
One-Component Flexible Line Marking Paint for Sports Surfaces
- Category
- SPORTS FLOOR COATINGS
Frequently asked questions
What is LINE PAINT used for?
On all kinds of urban and intercity highways, pedestrian crossings, airports and similar areas, on asphalt and concrete surfaces, it provides good performance and durability, especially at pedestrian crossings where traffic safety is important and under very heavy vehicle and pedestrian traffic. Thanks to its fast drying after application, it allows pedestrian and vehicle traffic to resume.
What are the key specifications of LINE PAINT?
The recorded supply specification for LINE PAINT includes Density, g/cm³: 1.36; Drying Time, h: ~4-6; Packing, kg: 20; Consumption, kg/m²: 0.25; Solid Content, %: 90. The full table is listed on this page.
How is LINE PAINT packaged and stored?
Packaging: 20 kg. Shelf life: 12 months.
Is LINE PAINT KKDİK registered, and which documents are available?
Yes. LINE PAINT supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com