- Density, g/cm³
- 0.90-1.00
- Drying Time, h
- ~4-6
- Packing, kg
- 60
- Consumption, kg/m²
- 0.350-0.450
Technical Specifications
| Parameter | Value |
|---|---|
| Density, g/cm³ | 0.90-1.00 |
| Drying Time, h | ~4-6 |
| Packing, kg | 60 |
| Consumption, kg/m² | 0.350-0.450 |
| Solid Content, % | 85 |
| Hardness, Shore A | 35-40 |
| Shelf Life, months | 12 |
| Application Equipment | Rubber squeegee |
Product Description
FLEX CS is an unpigmented sports-ground base material containing special granulometric rubber and a 100% high-performance latex binder. Acrylic cushion (flexible) coating. Cushion is a water-based material with an acrylic binder, prepared with two types of rubber granules, for a 0.5 mm-1.0 mm thin layer or a 1.0 mm-2.0 mm coarse layer, and used to give the surface flexibility.
Advantages
- Ready to use.
- Easy to apply.
- Effective water vapour permeability.
- High resistance to UV rays.
- Retains its flexibility at low temperatures.
- Can be painted over.
- Resistant to changing environmental conditions.
Application
Before applying any of the tennis court systems, new hot asphalt surfaces must have cured for a minimum of 14 days and new concrete surfaces for a minimum of 28 days. Loose particles such as old paint, dirt and dust, as well as oil and grease residues, must be removed from the surface. Before applying FLEX CS, make sure that the floor is completely dry. FLEX CS is mixed with water in a clean container, at a maximum dilution ratio of 5:1, with a low-speed drill mixer until a homogeneous mixture is obtained. In very hot application conditions, more water may be added. It is applied with a rubber squeegee from one end of the floor to the other in parallel layers. If the application is carried out in hot weather, water should be sprayed to keep the surface damp. When the first coat is completely dry, the second coat must be applied at an angle of 90 degrees to the previous one.
Packaging & storage
Packaging
60 kg
Shelf Life
12 months
Where it is used
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
Acrylic Resin-Based Flexible Layer with Special Granulometric Rubber Typical specifications: Density, g/cm³: 0.90-1.00; Drying Time, h: ~4-6; Packing, kg: 60. KORKİMYA supplies FLEX CS in 60 kg. Shelf life: 12 months.
FLEX CS is an unpigmented sports-ground base material containing special granulometric rubber and a 100% high-performance latex binder. Acrylic cushion (flexible) coating. Cushion is a water-based material with an acrylic binder, prepared with two types of rubber granules, for a 0.5 mm-1.0 mm thin layer or a 1.0 mm-2.0 mm coarse layer, and used to give the surface flexibility.
Acrylic Resin-Based Flexible Layer with Special Granulometric Rubber
- Category
- SPORTS FLOOR COATINGS
Frequently asked questions
What are the key specifications of FLEX CS?
The recorded supply specification for FLEX CS includes Density, g/cm³: 0.90-1.00; Drying Time, h: ~4-6; Packing, kg: 60; Consumption, kg/m²: 0.350-0.450; Solid Content, %: 85. The full table is listed on this page.
How is FLEX CS packaged and stored?
Packaging: 60 kg. Shelf life: 12 months.
Is FLEX CS KKDİK registered, and which documents are available?
Yes. FLEX CS supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com