- Density, g/cm³
- 0.98±0.3
- Drying Time, h
- ~2-3
- Packing
- 15 kg
- Consumption, kg/m²
- 0.100-0.200
Technical Specifications
| Parameter | Value |
|---|---|
| Density, g/cm³ | 0.98±0.3 |
| Drying Time, h | ~2-3 |
| Packing | 15 kg |
| Consumption, kg/m² | 0.100-0.200 |
| Shelf Life, months | 12 |
| Application Equipment | Applied with brush and roller |
Product Description
An acrylic resin-based, transparent, glossy concrete curing and polishing material that does not wear off the surface, provides impermeability to concrete and is used for curing concrete.
Advantages
- Prevents dusting by increasing the abrasion resistance of the surface.
- Easy to apply, as it is one-component.
- Dries very quickly, as the solvent it contains evaporates very fast.
- By increasing water impermeability, it prevents cracks that may form in plasters as a result of freezing.
- Thanks to the glossy film it forms, it can also be used as a polish.
- Protects concrete against atmospheric effects that can penetrate it in the form of salts or gases, reduces dirt pick-up, and the colour of the concrete does not change under the effect of rain.
Application Areas
- Protection of concrete and other cementitious surfaces in buildings and infrastructure
- Extending the service life of concrete
- Suitable for exposed-aggregate concrete surfaces: glossy, colourless, gives the surface a vivid appearance
- Surfaces treated with a surface hardener
- Screed concrete
- No special curing process is required; it only needs to be protected from rain for at least 1 hour at a temperature of approx. +23°C (it becomes dust-resistant within 30 minutes in summer and within 45 minutes in winter).
Application
- POX 090 is ready to use. Mix thoroughly before application.
- Can be applied with a brush or a short-pile lambswool roller.
- Do not apply when rain is expected.
- Splashes of solvent, salt or sea water may cause loss of gloss or discolouration.
- No special curing process is required; it only needs to be protected from rain for at least 1 hour at a temperature of approx. +23°C (it becomes dust-resistant within 30 minutes in summer and within 45 minutes in winter).
Packaging & storage
Packaging
15 kg
Shelf Life
12 months
Where it is used
Used together with
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
One-Component Acrylic-Based Concrete Polish Typical specifications: Density, g/cm³: 0.98±0.3; Drying Time, h: ~2-3; Packing: 15 kg. KORKİMYA supplies POX 090 in 15 kg. Shelf life: 12 months.
An acrylic resin-based, transparent, glossy concrete curing and polishing material that does not wear off the surface, provides impermeability to concrete and is used for curing concrete.
One-Component Acrylic-Based Concrete Polish
- Category
- PRIMERS
Frequently asked questions
What are the key specifications of POX 090?
The recorded supply specification for POX 090 includes Density, g/cm³: 0.98±0.3; Drying Time, h: ~2-3; Packing: 15 kg; Consumption, kg/m²: 0.100-0.200; Shelf Life, months: 12. The full table is listed on this page.
How is POX 090 packaged and stored?
Packaging: 15 kg. Shelf life: 12 months.
Is POX 090 KKDİK registered, and which documents are available?
Yes. POX 090 supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com