AI-generated illustrative application scene for Waterproofing materials. Not a photograph of an actual project or job site.

WATERPROOFING MATERIALS.

The PROOF liquid membranes, the bitumen-rubber compounds KB and IZOBITUM 2K, the SB membrane, the transparent waterproofing material T GLASS, the hybrid polyurea PUR 450, the top coat FLOOR AL S and the repair and filling compounds EPOXAN 300, EPOXAN 500 and GROUT 500. The category lists 15 products; each product page gives the description and technical data.

Roofs · Terraces · Foundations · Pools15 PRODUCTS

WATERPROOFING MATERIALS industry — 15 optimised products.

AI-generated illustrative studio still-life for Waterproofing materials, on a transparent background: concrete with a liquid-membrane film, a bitumen-membrane offcut, and a ceramic tile. Not a photograph of an actual project, job site, or product package.
Illustrative application image; not a photograph of the actual product or package.

KB

KB is a rubber-bitumen-based, one-component, solvent-free waterproofing product. Applied by brushing, after drying it forms a seamless and waterproof coating on the surfaces to which it is applied. It does not lose its properties over a wide temperature range. It is fully resistant to UV rays and outdoor weather conditions. It is suitable for use in areas exposed to sunlight such as terraces, flat roofs and roof valleys. It has high elasticity (1000%) and crack-bridging properties. It is suitable for use below ground and is not affected by microorganisms or aggressive groundwater. It adheres strongly to many dry and slightly damp, absorbent and non-absorbent surfaces, and does not detach or blister over time.

Details →

AI-generated illustrative studio still-life for Waterproofing materials, on a transparent background: concrete with a liquid-membrane film, a bitumen-membrane offcut, and a ceramic tile. Not a photograph of an actual project, job site, or product package.
Illustrative application image; not a photograph of the actual product or package.

FLEXAL

An acrylic-based, one-component liquid plastic coating and elastic waterproofing material.

Details →

AI-generated illustrative studio still-life for Waterproofing materials, on a transparent background: concrete with a liquid-membrane film, a bitumen-membrane offcut, and a ceramic tile. Not a photograph of an actual project, job site, or product package.
Illustrative application image; not a photograph of the actual product or package.

SB

SB is an extremely abrasion-resistant waterproofing coating material consisting of special mineral filler and polymer components, with strong adhesion capability, excellent water resistance and high UV resistance.

Details →

AI-generated illustrative studio still-life for Waterproofing materials, on a transparent background: concrete with a liquid-membrane film, a bitumen-membrane offcut, and a ceramic tile. Not a photograph of an actual project, job site, or product package.
Illustrative application image; not a photograph of the actual product or package.

IZOBITUM 2K

IZOBITUM 2K is a rubber-bitumen-based, polymer-modified waterproofing product. It is two-component, consisting of a liquid component of bitumen emulsion and a cement-based powder component enriched with chemical additives. It can be used for foundation tanking and curtain (retaining) wall waterproofing of buildings, as well as for waterproofing balconies and terraces. It is applied to mineral-based substrates such as concrete, screed, plaster and mortar.

Details →

AI-generated illustrative studio still-life for Waterproofing materials, on a transparent background: concrete with a liquid-membrane film, a bitumen-membrane offcut, and a ceramic tile. Not a photograph of an actual project, job site, or product package.
Illustrative application image; not a photograph of the actual product or package.

PROOF

PROOF is a one-component, low-viscosity, polyurethane-based liquid waterproofing and protection material. It is an economical system. It cures with atmospheric moisture and adheres strongly to almost any type of surface, forming a highly elastic film. Its formulation is based on pure elastomeric hydrophobic polyurethane resin and special inorganic fillers, which give the material excellent chemical, mechanical and thermal resistance. It is applied in two coats by brush, roller or airless spray machine. The minimum total consumption is 1.2-1.5 kg/m².

Details →

AI-generated illustrative studio still-life for Waterproofing materials, on a transparent background: concrete with a liquid-membrane film, a bitumen-membrane offcut, and a ceramic tile. Not a photograph of an actual project, job site, or product package.
Illustrative application image; not a photograph of the actual product or package.

PROOF MY

PROOF MY cures with the moisture in the air and adheres strongly to almost any type of surface, forming a highly elastic film. It is a UV-resistant product. It is based on pure elastomeric hydrophobic polyurethane resin and special inorganic fillers, which give the material excellent chemical, mechanical and thermal resistance. It is applied in two coats by brush, roller or airless spray machine. The minimum total consumption is 1.2-1.5 kg/m².

Details →

AI-generated illustrative studio still-life for Waterproofing materials, on a transparent background: concrete with a liquid-membrane film, a bitumen-membrane offcut, and a ceramic tile. Not a photograph of an actual project, job site, or product package.
Illustrative application image; not a photograph of the actual product or package.

FLOOR AL S

FLOOR AL S is a polyurethane-based, two-component, coloured, UV-resistant surface protection material with high abrasion and chemical resistance.

Details →

AI-generated illustrative studio still-life for Waterproofing materials, on a transparent background: concrete with a liquid-membrane film, a bitumen-membrane offcut, and a ceramic tile. Not a photograph of an actual project, job site, or product package.
Illustrative application image; not a photograph of the actual product or package.

T GLASS

T-GLASS is a two-component product used for waterproofing and also for decorative purposes. It adheres excellently to surfaces such as glass, mosaic, tiles, porcelain, ceramics, marble, granite, natural stone, wood, concrete, screed, galvanised sheet and aluminium, has high resistance to atmospheric conditions and can be produced transparent or coloured; in addition to its excellent water resistance, it has high chemical and physical resistance. It is not affected by UV and outdoor weather conditions. It does not yellow, fade or peel over time. It is easily applied without disturbing or damaging the existing coating, especially for solving waterproofing problems on floors such as balconies, terraces, bathrooms and pools.

Details →

AI-generated illustrative studio still-life for Waterproofing materials, on a transparent background: concrete with a liquid-membrane film, a bitumen-membrane offcut, and a ceramic tile. Not a photograph of an actual project, job site, or product package.
Illustrative application image; not a photograph of the actual product or package.

PROOF 2K Y

PROOF 2K Y is a two-component thixotropic coating material made of high-quality elastomeric polyurethane resins. It is solvent-free. After polymerisation it forms a hydrophobic, elastic and strong membrane. It is especially recommended for waterproofing water tanks. PROOF 2K Y also provides a continuous, integral coating on surfaces with details such as chimneys, antennas or pipes. When the surfaces of the tanks are exposed to direct sunlight, the colour of the material fades. However, this is purely a matter of appearance; waterproofing and protection performance are not affected in any way.

Details →

AI-generated illustrative studio still-life for Waterproofing materials, on a transparent background: concrete with a liquid-membrane film, a bitumen-membrane offcut, and a ceramic tile. Not a photograph of an actual project, job site, or product package.
Illustrative application image; not a photograph of the actual product or package.

PROOF RC 1K

PROOF RC 1K is thixotropic. It adheres very strongly to almost any type of surface, including bituminous substrates, forming a hydrophobic and elastic film. Its resistance to chemicals and mechanical effects is excellent. Ideal for vertical surface applications; it does not sag or blister. It is based entirely on elastomeric hydrophobic polyurethane resin, supplemented with chemically polymerised pure bitumen.

Details →

AI-generated illustrative studio still-life for Waterproofing materials, on a transparent background: concrete with a liquid-membrane film, a bitumen-membrane offcut, and a ceramic tile. Not a photograph of an actual project, job site, or product package.
Illustrative application image; not a photograph of the actual product or package.

PROOF RC 2K

PROOF RC 2K is a fast-curing, two-component, bitumen-enriched, polyurethane-based liquid material. It adheres strongly to almost all types of surfaces, forming a highly elastic film. Its chemical and mechanical resistance is excellent. It is based entirely on elastomeric hydrophobic polyurethane resin, supplemented with chemically polymerised pure bitumen.

Details →

AI-generated illustrative studio still-life for Waterproofing materials, on a transparent background: concrete with a liquid-membrane film, a bitumen-membrane offcut, and a ceramic tile. Not a photograph of an actual project, job site, or product package.
Illustrative application image; not a photograph of the actual product or package.

PUR 450

PUR 450 is a two-component, fast-curing, spread-applied hybrid polyurea system. It has been specially developed for application by roller or trowel. It has excellent elasticity. It also has a polymerised profile specially formulated to strengthen adhesion. It is an ideal product for commercial and industrial applications that require a high level of abrasion resistance and impact strength.

Details →

AI-generated illustrative studio still-life for Waterproofing materials, on a transparent background: concrete with a liquid-membrane film, a bitumen-membrane offcut, and a ceramic tile. Not a photograph of an actual project, job site, or product package.
Illustrative application image; not a photograph of the actual product or package.

EPOXAN 300

Epoxy-based anchoring, installation and repair mortar.

Details →

AI-generated illustrative studio still-life for Waterproofing materials, on a transparent background: concrete with a liquid-membrane film, a bitumen-membrane offcut, and a ceramic tile. Not a photograph of an actual project, job site, or product package.
Illustrative application image; not a photograph of the actual product or package.

EPOXAN 500

Two-component, solvent-free, thixotropic epoxy repair and bonding putty.

Details →

AI-generated illustrative studio still-life for Waterproofing materials, on a transparent background: concrete with a liquid-membrane film, a bitumen-membrane offcut, and a ceramic tile. Not a photograph of an actual project, job site, or product package.
Illustrative application image; not a photograph of the actual product or package.

GROUT 500

A solvent-free, three-component casting mortar consisting of a combination of specially graded aggregates and high-strength epoxy resins. It is a self-levelling, flowing epoxy mortar that can be applied on concrete, stone, mortar, steel, aluminium, asbestos cement, polyester, wood and epoxy-based materials.

Details →

View All →
PRIMERSFLOOR COATINGSINJECTION MATERIALSSPRAY INSULATIONSPORTS FLOOR COATINGSBINDERS AND BONDING AGENTSADHESIVES AND MASTICS

New products, capacity news, and KORKİMYA announcements - straight to your inbox.

Be the first to hear about new hydrocarbon resin launches, certifications, and industry events. No spam.

By subscribing, you accept our Privacy Policy.