GROUT 500

Three-Component, Solvent-Free Repair and Filling Mortar

AI-generated illustrative studio still-life for Waterproofing materials, on a transparent background: concrete with a liquid-membrane film, a bitumen-membrane offcut, and a ceramic tile. Not a photograph of an actual project, job site, or product package.
Illustrative application image; not a photograph of the actual product or package.
Compressive Strength, N/mm²
80
Drying Time, h
~24
Packing
A: 2.7 kg + B: 1.3 kg + C: 16 kg (total 20 kg)
Shelf Life, months
12

Technical Specifications

ParameterValue
Compressive Strength, N/mm²80
Drying Time, h~24
PackingA: 2.7 kg + B: 1.3 kg + C: 16 kg (total 20 kg)
Shelf Life, months12
Bending Strength, N/mm²32
Density, g/cm³1.85 ± 0.05
Mixing Ratio, %A/B/C: 2.7/1.3/16

Product Description

A solvent-free, three-component casting mortar consisting of a combination of specially graded aggregates and high-strength epoxy resins. It is a self-levelling, flowing epoxy mortar that can be applied on concrete, stone, mortar, steel, aluminium, asbestos cement, polyester, wood and epoxy-based materials.

Application Areas

  • Anchoring works
  • Installation under crane rails
  • Bridge bearings
  • Repair of aircraft runways and helipads
  • Fixing of steel columns and poles
  • Foundations of all kinds of industrial machinery, under bearings
  • Engineering structures such as metro lines, motorways and dams
  • Repair, restoration and strengthening projects at locations where reinforced concrete shear walls join beams
  • Assembly of prefabricated elements

Advantages

  • Does not shrink; shows high fluidity.
  • Resistant to oils and acids.
  • Non-toxic. Waterproof.
  • Resistant to freezing and thawing.
  • Resistant to various chemicals.

Application

Pour component B into component A. Mix with a low-speed electric mixer until the cloudy-looking mixture reaches a completely homogeneous appearance. Then pour the mixture into a suitable container and add component C slowly and continuously; continue mixing for at least 3 minutes until a homogeneous, flowing mortar is obtained.

Depending on air temperature and ambient conditions, the prepared mixture must be poured into place and placed within 5 minutes. To fill the underside of cavities enclosed on all four sides and covered on top, GROUT 500 must be poured from one side only. In this way, air is expelled and the formation of voids is prevented. To accelerate the flow during pouring, the material can be pushed from one side with a long piece of iron.

Packaging & storage

Packaging

A: 2.7 kg + B: 1.3 kg + C: 16 kg (total 20 kg)

Shelf Life

12 months

Where it is used

Used together with

  • EPOXAN 300 · Epoxy-Based, Two-Component Anchoring, Installation and Repair Mortar

Documents

Technical data sheet (TDS)

Review the recorded specifications, packaging and storage information.

View technical data sheet ↗

Safety & lot documents

Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.

SDS available on request.

Request Sample

Leave your email. Our sales team will get in touch about a sample and the certificate of analysis.

Response time · 24 hours

Product Information

Three-Component, Solvent-Free Repair and Filling Mortar Typical specifications: Compressive Strength, N/mm²: 80; Drying Time, h: ~24; Packing: A: 2.7 kg + B: 1.3 kg + C: 16 kg (total 20 kg). KORKİMYA supplies GROUT 500 in A: 2.7 kg + B: 1.3 kg + C: 16 kg (total 20 kg). Shelf life: 12 months.

A solvent-free, three-component casting mortar consisting of a combination of specially graded aggregates and high-strength epoxy resins. It is a self-levelling, flowing epoxy mortar that can be applied on concrete, stone, mortar, steel, aluminium, asbestos cement, polyester, wood and epoxy-based materials.

Three-Component, Solvent-Free Repair and Filling Mortar

Category
WATERPROOFING MATERIALS

Frequently asked questions

What are the key specifications of GROUT 500?

The recorded supply specification for GROUT 500 includes Compressive Strength, N/mm²: 80; Drying Time, h: ~24; Packing: A: 2.7 kg + B: 1.3 kg + C: 16 kg (total 20 kg); Shelf Life, months: 12; Bending Strength, N/mm²: 32. The full table is listed on this page.

How is GROUT 500 packaged and stored?

Packaging: A: 2.7 kg + B: 1.3 kg + C: 16 kg (total 20 kg). Shelf life: 12 months.

Is GROUT 500 KKDİK registered, and which documents are available?

Yes. GROUT 500 supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.

Related Products

Last updated: 10/11/2026

MSDS Available on Request · Export Registered · korkimya.com

New products, capacity news, and KORKİMYA announcements - straight to your inbox.

Be the first to hear about new hydrocarbon resin launches, certifications, and industry events. No spam.

By subscribing, you accept our Privacy Policy.

GROUT 500