SB

Technical Specifications

Product Description

SB is an extremely abrasion-resistant waterproofing coating material consisting of special mineral filler and polymer components, with strong adhesion capability, excellent water resistance and high UV resistance.

Application Areas

• Indoors and outdoors, in vertical and horizontal applications, on the side from which the water comes
• In concrete terrace and roof waterproofing
• On bituminous, slate-surfaced and coloured sand-surfaced roofing membranes
• On Betopan (cement-bonded particle board), Eternit (fibre cement), MDF and OSB surfaces
• In wet area waterproofing, provided that it is covered with ceramic tiles
• On concrete roads, parks and gardens, and asphalt surfaces
• In concealed gutters, gutters and eaves
• In renewing the waterproofing of bituminous or similar surfaces
• Ceramic-tiled surfaces are waterproofed using AST PU primer (PROVIDED THAT THEY ARE TILED OVER AGAIN WITH CERAMICS)

Advantages

• Easy to apply.
• Its elastomeric structure enables it to bridge shrinkage cracks.
• Resistant to freeze-thaw.
• Resistant to ageing, water, various salt solutions and weak acids.
• Used in areas subject to movement and vibration.
• High adhesion and formation of an elastic film layer.
• High UV and abrasion resistance.
• Economical and long-lasting.
• Environmentally friendly, not harmful to human health.
• Should not be applied on wet and frozen surfaces or when precipitation is likely.

Application Method

Before application, the substrate should be primed to reduce surface absorbency and increase bond strength. When priming the substrate, the product should be worked well into the substrate using a roller or a stiff brush. Allow the applied primer to dry for 2-3 hours. After the primer application is completed, SB is applied in 2 coats at 4-hour intervals.

Packaging & storage

Where it is used

• Roofs
• Terraces and balconies
• Wet areas

Used together with

• KB · One-Component, Bitumen-Rubber-Based, UV-Resistant, Elastic Waterproofing Material
• FLEXAL · Elastomeric Resin-Based, UV-Resistant, One-Component, Elastic Waterproofing Material
• FLEX AST · One-Component, Water-Based Elastomeric Resin Primer
• PROOF · One-Component, Polyurethane-Based, Easy-to-Apply Liquid Membrane Developed for Waterproofing and Protection
• PROOF MY · One-Component Polyurethane-Based, Easy-to-Apply, UV-Resistant Liquid Membrane Developed for Waterproofing and Protection
• PROOF RC 1K · One-Component Polyurethane-Bitumen-Based Liquid Membrane Developed for Waterproofing and Protection
• PROOF RC 2K · Two-Component Polyurethane-Bitumen-Based Liquid Membrane Developed for Waterproofing and Protection
• PUR 450 · Two-Component, Cold-Applied Hybrid Polyurea Coating Material Applied by Roller or Trowel, Developed for Waterproofing

Documents

Request Sample

Frequently asked questions

Related Products