SB Technical Data Sheet
Supply specifications, test methods and typical values for your technical assessment.
Technical Specifications
| Parameter | Value |
|---|---|
| Density, g/cm³ | 1.45 |
| Drying Time, h | ~24 |
| Packing | 20 kg |
| Consumption, kg/m² | 1.00 |
| Viscosity, mPa·s | 10000-12000 |
| Solid Content, % | 75 |
| Shelf Life, months | 12 |
| Application Equipment | Applied with brush or roller |
Application Areas
- Indoors and outdoors, in vertical and horizontal applications, on the side from which the water comes
- In concrete terrace and roof waterproofing
- On bituminous, slate-surfaced and coloured sand-surfaced roofing membranes
- On Betopan (cement-bonded particle board), Eternit (fibre cement), MDF and OSB surfaces
- In wet area waterproofing, provided that it is covered with ceramic tiles
- On concrete roads, parks and gardens, and asphalt surfaces
- In concealed gutters, gutters and eaves
- In renewing the waterproofing of bituminous or similar surfaces
- Ceramic-tiled surfaces are waterproofed using AST PU primer (PROVIDED THAT THEY ARE TILED OVER AGAIN WITH CERAMICS)
Packaging & storage
Packaging
20 kg
Shelf Life
12 months
Documents & product information
Technical Data Sheet
For the complete product record, applications and related products, review the product details.
Full product details ↗Safety & lot documents
Request the current SDS and the certificate of analysis for the lot under assessment.
Document date:
This document shows the applicable KORKİMYA supply specification for SB supplied by KORKİMYA. This document is not a lot analysis result. A lot-specific certificate of analysis is issued with every shipment.
For full product information, see the SB product page.
SB