FLEXAL
Elastomeric Resin-Based, UV-Resistant, One-Component, Elastic Waterproofing Material
- Density, g/cm³
- 1.35
- Drying Time, h
- ~24
- Packing
- 20 kg
- Flexibility, %
- 450
Technical Specifications
| Parameter | Value |
|---|---|
| Density, g/cm³ | 1.35 |
| Drying Time, h | ~24 |
| Packing | 20 kg |
| Flexibility, % | 450 |
| Consumption, kg/m² | 1.50 |
| Shelf Life, months | 12 |
| Application Equipment | Applied with brush or roller |
Product Description
An acrylic-based, one-component liquid plastic coating and elastic waterproofing material.
Areas of Use
- Concrete, plaster, cement board, galvanised steel, zinc, aluminium, PVC, polyester and wood-clad sloped
- roofs and terraces: in their waterproofing
- In the waterproofing of building exterior facades
- Used for waterproofing details such as cracks, eaves and chimney bases
Advantages
- Ready to use, can be easily applied with a brush or roller.
- Low labour cost.
- 600% elastic.
- Has effective water vapour permeability.
- Highly resistant to UV rays.
- Retains its flexibility at low temperatures.
- Can be painted over.
Application
Care must be taken that the cement-based surfaces of the structure that come into contact with water are sound, dry, load-bearing, dust-free and clean, and at the same time level. The surface must be thoroughly cleaned of all oil, grease, rust and paraffin residues that would weaken adhesion, and there must be no loose particles on the surface.
Before application, the substrate should be primed to reduce surface absorbency and increase bond strength. When priming the substrate, the product should be worked well into the substrate using a roller or a stiff brush. Allow the applied primer to dry for 2-3 hours. After the primer application is completed, SB is applied in 2 coats at 4-hour intervals.
Packaging & storage
Packaging
20 kg
Shelf Life
12 months
Where it is used
Used together with
- KB · One-Component, Bitumen-Rubber-Based, UV-Resistant, Elastic Waterproofing Material
- SB · UV-Resistant Waterproofing Membrane Consisting of Special Mineral Filler and Polymer Components
- FLEX AST · One-Component, Water-Based Elastomeric Resin Primer
- PROOF · One-Component, Polyurethane-Based, Easy-to-Apply Liquid Membrane Developed for Waterproofing and Protection
- PROOF MY · One-Component Polyurethane-Based, Easy-to-Apply, UV-Resistant Liquid Membrane Developed for Waterproofing and Protection
- PROOF RC 1K · One-Component Polyurethane-Bitumen-Based Liquid Membrane Developed for Waterproofing and Protection
- PROOF RC 2K · Two-Component Polyurethane-Bitumen-Based Liquid Membrane Developed for Waterproofing and Protection
- PUR 450 · Two-Component, Cold-Applied Hybrid Polyurea Coating Material Applied by Roller or Trowel, Developed for Waterproofing
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
Elastomeric Resin-Based, UV-Resistant, One-Component, Elastic Waterproofing Material Typical specifications: Density, g/cm³: 1.35; Drying Time, h: ~24; Packing: 20 kg. KORKİMYA supplies FLEXAL in 20 kg. Shelf life: 12 months.
An acrylic-based, one-component liquid plastic coating and elastic waterproofing material.
Elastomeric Resin-Based, UV-Resistant, One-Component, Elastic Waterproofing Material
- Category
- WATERPROOFING MATERIALS
Frequently asked questions
What are the key specifications of FLEXAL?
The recorded supply specification for FLEXAL includes Density, g/cm³: 1.35; Drying Time, h: ~24; Packing: 20 kg; Flexibility, %: 450; Consumption, kg/m²: 1.50. The full table is listed on this page.
How is FLEXAL packaged and stored?
Packaging: 20 kg. Shelf life: 12 months.
Is FLEXAL KKDİK registered, and which documents are available?
Yes. FLEXAL supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com