- Compressive Strength, N/mm²
- (1 day) >30 - (7 days) >75
- Drying Time, h
- ~24
- Packing
- A: 3.75 kg + B: 1.25 kg (total 5 kg)
- Consumption, kg/m²
- 1.65
Technical Specifications
| Parameter | Value |
|---|---|
| Compressive Strength, N/mm² | (1 day) >30 - (7 days) >75 |
| Drying Time, h | ~24 |
| Packing | A: 3.75 kg + B: 1.25 kg (total 5 kg) |
| Consumption, kg/m² | 1.65 |
| Bending Strength, N/mm² | (1 day) >17 - (7 days) >25 |
| Density, g/cm³ | 1.8 |
| Mixing Ratio, % | A/B: 100/33 |
| Shelf Life, months | 12 |
Product Description
Epoxy-based anchoring, installation and repair mortar.
Application Areas
- Used for planting rebar in reinforced concrete structural elements such as columns, beams, shear walls, slabs, etc.
- Used for bonding all kinds of metal and steel components to concrete.
- Used for sealing outer surfaces and fixing packers before injection.
- Used for fixing guardrails and seismic dampers in structures such as bridges and viaducts.
Advantages
- Paste consistency. It can be used easily in horizontal and vertical applications and does not sag.
- Water- and gas-tight.
- High filler-loading capacity.
- Resistant to chemicals.
- Solvent-free.
Pre-Application Preparation
- The surface must be cleaned of all kinds of dirt that could prevent adhesion.
- It must be confirmed that the substrate is dry.
- The necessary precautions against water must be taken on the surface.
- The temperature of the surface to be treated must be between +5°C and +30°C.
- Component B of EPOXAN 300 is added slowly into component A and mixed with a 300 rpm mixer.
- Mixing continues for an average of 4 minutes until a homogeneous mixture is obtained.
Application
EPOXAN 300 can be applied with a spatula, trowel or cartridge gun. EPOXAN 300 is filled into the previously prepared holes starting from the bottom. The anchor rod of the dimensions specified in the project should be inserted into the filled hole while slowly rotating it, and it should be checked that the material overflows out of the anchor hole.
Packaging & storage
Packaging
A: 3.75 kg + B: 1.25 kg (total 5 kg)
Shelf Life
12 months
Where it is used
Used together with
- GROUT 500 · Three-Component, Solvent-Free Repair and Filling Mortar
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
Epoxy-Based, Two-Component Anchoring, Installation and Repair Mortar Typical specifications: Compressive Strength, N/mm²: (1 day) >30 - (7 days) >75; Drying Time, h: ~24; Packing: A: 3.75 kg + B: 1.25 kg (total 5 kg). KORKİMYA supplies EPOXAN 300 in A: 3.75 kg + B: 1.25 kg (total 5 kg). Shelf life: 12 months.
Epoxy-based anchoring, installation and repair mortar.
Epoxy-Based, Two-Component Anchoring, Installation and Repair Mortar
- Category
- WATERPROOFING MATERIALS
Frequently asked questions
What are the key specifications of EPOXAN 300?
The recorded supply specification for EPOXAN 300 includes Compressive Strength, N/mm²: (1 day) >30 - (7 days) >75; Drying Time, h: ~24; Packing: A: 3.75 kg + B: 1.25 kg (total 5 kg); Consumption, kg/m²: 1.65; Bending Strength, N/mm²: (1 day) >17 - (7 days) >25. The full table is listed on this page.
How is EPOXAN 300 packaged and stored?
Packaging: A: 3.75 kg + B: 1.25 kg (total 5 kg). Shelf life: 12 months.
Is EPOXAN 300 KKDİK registered, and which documents are available?
Yes. EPOXAN 300 supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com