- Compressive Strength, N/mm²
- 72
- Drying Time, h
- ~24
- Packing
- A: 5 kg + B: 5 kg (total 10 kg)
- Consumption, kg/m²
- 1.65
Technical Specifications
| Parameter | Value |
|---|---|
| Compressive Strength, N/mm² | 72 |
| Drying Time, h | ~24 |
| Packing | A: 5 kg + B: 5 kg (total 10 kg) |
| Consumption, kg/m² | 1.65 |
| Bending Strength, N/mm² | 37 |
| Density, g/cm³ | 1.6 |
| Mixing Ratio, % | A/B: 1/1 |
| Shelf Life, months | 12 |
Product Description
Two-component, solvent-free, thixotropic epoxy repair and bonding putty.
Application Areas
- For local repairs on concrete, cement plaster, asbestos-cement and metal surfaces,
- For solving osmosis problems of sheet metal, wooden and especially fibreglass boats,
- For repairing cracks and damaged areas in the substructure before self-levelling applications
- In the underground metal and concrete pipelines of cooling towers at power plants
- At pipe joints
- In the restoration of historic buildings
Advantages
- Easy to apply.
- High mechanical and chemical resistance.
- Harmless to health.
- Does not sag up to 2 cm.
- Excellent resistance to seawater.
- The surface must be cleaned of all kinds of dirt that could prevent adhesion.
- It must be confirmed that the substrate is dry.
- The necessary precautions against water must be taken on the surface.
- The temperature of the surface to be treated must be between +5°C and +30°C.
- Component B of EPOXAN 500 is added slowly into component A and mixed with a 300 rpm mixer.
- Mixing continues for an average of 4 minutes until a homogeneous mixture is obtained.
Application
EPOXAN 500 can be applied with a spatula, trowel or cartridge gun. EPOXAN 500 is filled into the previously prepared holes starting from the bottom. The anchor rod of the dimensions specified in the project should be inserted into the filled hole while slowly rotating it, and it should be checked that the material overflows out of the anchor hole.
It is recommended to consult the KORKİMYA technical department regarding the diameter of the hole to be drilled during anchoring, the reinforcement diameter and the consumption.
Packaging & storage
Packaging
A: 5 kg + B: 5 kg (total 10 kg)
Shelf Life
12 months
Where it is used
Used together with
- POX 005 · Two-Component, Solvent-Free, Epoxy-Based Filled Primer
- POX 006 · Two-Component, Solvent-Based Epoxy Primer and Impregnation System
- SEAL 2K-D · Two-Component Polyurethane-Based Thixotropic Sealant Developed for Vertical Surfaces
- PUR 770 · Two-Component Hot-Applied Flexible and Economical Polyurea Coating System
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
Two-Component, Solvent-Free, Thixotropic Lightweight Epoxy Filler Putty Typical specifications: Compressive Strength, N/mm²: 72; Drying Time, h: ~24; Packing: A: 5 kg + B: 5 kg (total 10 kg). KORKİMYA supplies EPOXAN 500 in A: 5 kg + B: 5 kg (total 10 kg). Shelf life: 12 months.
Two-component, solvent-free, thixotropic epoxy repair and bonding putty.
Two-Component, Solvent-Free, Thixotropic Lightweight Epoxy Filler Putty
- Category
- WATERPROOFING MATERIALS
Frequently asked questions
What are the key specifications of EPOXAN 500?
The recorded supply specification for EPOXAN 500 includes Compressive Strength, N/mm²: 72; Drying Time, h: ~24; Packing: A: 5 kg + B: 5 kg (total 10 kg); Consumption, kg/m²: 1.65; Bending Strength, N/mm²: 37. The full table is listed on this page.
How is EPOXAN 500 packaged and stored?
Packaging: A: 5 kg + B: 5 kg (total 10 kg). Shelf life: 12 months.
Is EPOXAN 500 KKDİK registered, and which documents are available?
Yes. EPOXAN 500 supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com