PUR K35
Polyurethane-Based Spray Foam System for Thermal Insulation, Applied with Special Pressure Machines, Available in Different Densities
- Density, g/cm³
- 1.00-1.05
- Cream Time
- 3-4 s
- Gel Time
- 4-6 s
- Tack-Free (Touch) Time
- 8-10 s
Technical Specifications
| Parameter | Value |
|---|---|
| Density, g/cm³ | 1.00-1.05 |
| Cream Time | 3-4 s |
| Gel Time | 4-6 s |
| Tack-Free (Touch) Time | 8-10 s |
| Consumption, kg/m²/mm | 1.1 |
| Free-Rise Density, kg/m³ | 40 |
| Closed Cell Content, % | ≥ 90 |
| Shelf Life, months | 12 |
Product Description
PUR K35 is suitable for interior wall, exterior wall, roof and floor applications. It is suitable for multi-layer applications.
PUR K35 has been developed with new-generation blowing agents with low GWP and ODP (= 0) values and does not contain HFCF.
It has high adhesion strength on various surfaces and diffusion values on different surfaces.
It is a two-component (A and B) spray polyurethane system consisting of polyol and isocyanate, providing high thermal and sound insulation.
Advantages
- Saves energy
- HFC blowing agents are used for better insulation
- Eliminates thermal bridges
- Provides flawless, uninterrupted thermal insulation.
- Provides sound insulation.
- Low cost in use.
- Quick and easy to apply
- Provides excellent adhesion to many surfaces.
- Fast drying.
- Prevents air infiltration
- Waterproof.
- High abrasion resistance.
- Prevents unwanted dust, pollen, allergens and similar substances from entering the environment.
Application Areas
- Terrace and roof applications
- Floor applications
- Sound insulation of walls
- Thermal insulation of walls
- Special uses
Packaging & storage
Shelf Life
12 months
Where it is used
Used together with
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
SDS available on request.
Request Sample
Product Information
Polyurethane-Based Spray Foam System for Thermal Insulation, Applied with Special Pressure Machines, Available in Different Densities Typical specifications: Density, g/cm³: 1.00-1.05; Cream Time: 3-4 s; Gel Time: 4-6 s. Shelf life: 12 months.
PUR K35 is suitable for interior wall, exterior wall, roof and floor applications. It is suitable for multi-layer applications. PUR K35 has been developed with new-generation blowing agents with low GWP and ODP (= 0) values and does not contain HFCF. It has high adhesion strength on various surfaces and diffusion values on different surfaces. It is a two-component (A and B) spray polyurethane system consisting of polyol and isocyanate, providing high thermal and sound insulation.
Polyurethane-Based Spray Foam System for Thermal Insulation, Applied with Special Pressure Machines, Available in Different Densities
- Category
- SPRAY INSULATION
Frequently asked questions
What are the key specifications of PUR K35?
The recorded supply specification for PUR K35 includes Density, g/cm³: 1.00-1.05; Cream Time: 3-4 s; Gel Time: 4-6 s; Tack-Free (Touch) Time: 8-10 s; Consumption, kg/m²/mm: 1.1. The full table is listed on this page.
How is PUR K35 packaged and stored?
Shelf life: 12 months.
Is PUR K35 KKDİK registered, and which documents are available?
Yes. PUR K35 supplied by KORKİMYA is KKDİK registered. The SDS and the certificate of analysis (CoA) for the lot you are evaluating are available on request through this page.
Related Products
Last updated: 10/11/2026
MSDS Available on Request · Export Registered · korkimya.com