Polypropylene RPG2350-34
Injection Moulding · Transparent Thin-Wall Products · High-Clarity Packaging
- Production method
- Gas-phase propylene-ethylene copolymerisation
- Melt flow index, g/10 min
- 30 – 40,3
- Within-batch melt flow index deviation, %, max.
- max ±10
- Tensile yield strength, MPa, min.
- min 24
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Production method | Gas-phase propylene-ethylene copolymerisation | — |
| Melt flow index, g/10 min | 30 – 40,3 | g/10 min |
| Within-batch melt flow index deviation, %, max. | max ±10 | % |
| Tensile yield strength, MPa, min. | min 24 | — |
| Elongation at yield, %, min. | min 8 | % |
| Mass fraction of volatile matter, %, max. | max 0,09 | % |
Detailed application areas
Injection moulding of high-clarity thin-wall products.
Use Cases
- Injection Moulding
- Transparent Thin-Wall Products
- High-Clarity Packaging
- Consumer Products
Packaging & storage
Packaging
Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road.
Shelf Life
3 years from the date of manufacture
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
Regulatory and compliance
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
Polypropylene RPG2350-34 is a grade used in injection moulding of high-clarity thin-wall products, with a melt flow index of 30-40.3 g/10 min. Other stated values: Tensile yield strength min 24 MPa; Elongation at yield min 8 %. Typical specifications: Production method: Gas-phase propylene-ethylene copolymerisation; Melt flow index, g/10 min 30–40,3; Within-batch melt flow index deviation, %, max. ±10. KORKİMYA supplies Polypropylene RPG2350-34 in Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road.. Shelf life: 3 years from the date of manufacture.
Injection moulding of high-clarity thin-wall products.
Polypropylene RPG2350-34 is a grade used in injection moulding of high-clarity thin-wall products, with a melt flow index of 30-40.3 g/10 min. Other stated values: Tensile yield strength min 24 MPa; Elongation at yield min 8 %.
- Category
- Thermoplastic Polymers
Frequently asked questions
Where is RPG2350-34 used?
Polypropylene RPG2350-34 is used in injection moulding of high-clarity thin-wall products. Areas of use: Injection Moulding, Transparent Thin-Wall Products, High-Clarity Packaging, Consumer Products. Production method: Gas-phase propylene-ethylene copolymerisation.
What are the melt flow index and batch deviation of RPG2350-34?
The melt flow index of RPG2350-34 is 30-40.3 g/10 min. Within-batch melt flow index deviation max ±10 %.
Which other values are stated for RPG2350-34?
Stated values for RPG2350-34: Tensile yield strength min 24 MPa; Elongation at yield min 8 %; Mass fraction of volatile matter max 0.09 %.
Related Products
Last updated: 04/10/2026
MSDS Available · Export Registered · korkimya.com