PP Homopolymer BOPP Film Grade HF 3 22

PP Homopolymer BOPP Film Grade HF 3 22 (CAS 9003-07-0) is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; Melt mass-flow rate: Typical: 3 g/10 min; Tensile stress at yield: Typical: 35 MPa. KORKİMYA supplies PP Homopolymer BOPP Film Grade HF 3 22 in 25 kg PE bags; shrink/stretch-wrapped pallets, 1375 kg polymer. Road or rail silo transport also available..

PP homopolymer

CAS

9003-07-0

TN-VED Code

3902 10

Category

Thermoplastic Polymers

Synonyms

Test Methods

ISO 1133-1 · ISO 527-1,2 · ISO 178 · ISO 180/A · ISO 75-1,2

Why this product?

• Combustible; observe warehouse fire safety rules. [2] Typical properties measured on standard injection moulded specimens according to ISO 294-1; not to be used as specification.
• [2] Typical properties measured on standard injection moulded test specimen according to ISO 294-1.
• Special molecular structure: broad processing window; stiff films, high elasticity during processing; stable uniform melt flow, very good outer-layer adhesion, no orientation breakage; low haze, high gloss and excellent mechanical properties.
• Polymers exempt from REACH registration; monomers and relevant additives registered.
• Producer commits to only REACH-compliant raw materials.
• As of August 2025, no specifically identified SVHC >0.1%.
• Compliance/safety: DDS.
• PP homopolymer; no slip or antiblocking agent or calcium stearate.
• If high humidity/fluctuating temperatures cause condensation in packaging, drying pellets before use is recommended.
• Suitable for recycling using modern methods.
• Keep in-house production waste clean to facilitate direct recycling.
• Heat-treated pooling pallets are collected for reuse; remain provider property.
• Homopolymer for high-speed BOPPF lines; special molecular structure provides a broad processing window.
• Films have very good stiffness, while the grade is very elastic during processing.
• Stable and uniform melt flow, very good adhesion to outer layers, no breakage during orientation, excellent optical properties: low haze and high gloss.
• Produced BOPPF have excellent mechanical properties.
• Contains neither slip nor antiblocking agent and calcium stearate.
• See DDS.
• See MSDS.
• High humidity and fluctuating temperatures can cause atmospheric moisture to condense inside packing.
• Heat-treated pooling pallets are collected after use for reuse and remain property of the pallet provider.
• MFR test conditions: 230 °C, 2.16 kg. [2] Tensile stress at yield, tensile strain at yield, flexural modulus, Izod impact strength (notched, 23 °C) and HDT (0.45 MPa, flatwise) are measured on standard injection-moulded test specimens according to ISO 294-1.