PP Homopolymer Thin Wall Injection Grade HM 50 46
CAS 9003-07-0
Generic registry number (not stated in the manufacturer TDS)
High-fluidity, controlled-rheology PP homopolymer
- Melt mass-flow rate
- Typical: 50 g/10 min
- Tensile stress at yield
- Typical: 36.5 MPa
- Tensile strain at yield
- Typical: 8 %
- Flexural modulus
- Typical: 1850 MPa
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Melt mass-flow rate | Typical: 50 g/10 min | ISO 1133-1 · g/10 min |
| Tensile stress at yield | Typical: 36.5 MPa | ISO 527-1,2 |
| Tensile strain at yield | Typical: 8 % | ISO 527-1,2 · % |
| Flexural modulus | Typical: 1850 MPa | ISO 178 |
| Izod impact strength (notched, 23 °C) | Typical: 3 kJ/m² | ISO 180/A · °C |
| HDT (0.45 MPa, flatwise) | Typical: 100 °C | ISO 75-1,2 · °C |
| Recommended processing temperature | Typical: 190–250 °C | °C |
Detailed application areas
Thin-wall injection moulding: household and garden articles; containers, storage boxes, bowls, buckets, lids, trays, caps, food packaging boxes, media boxes, flower pots, garden furniture and general-purpose articles. Can be used in mixtures with TATREN impact copolymers and for compounding.
Packaging & storage
Packaging
25 kg PE bags; shrink/stretch-wrapped pallets, 1375 kg polymer. Road/rail silo transport also available.
Storage
Protect from UV and temperatures above 40 °C. Drying pellets before use is recommended if condensation occurs.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
PP Homopolymer Thin Wall Injection Grade HM 50 46 (CAS 9003-07-0) is an industrial product in the thermoplastic polymers category. Typical specifications: Melt mass-flow rate: Typical: 50 g/10 min; Tensile stress at yield: Typical: 36.5 MPa; Tensile strain at yield: Typical: 8 %. KORKİMYA supplies PP Homopolymer Thin Wall Injection Grade HM 50 46 in 25 kg PE bags; shrink/stretch-wrapped pallets, 1375 kg polymer. Road/rail silo transport also available..
High-fluidity, controlled-rheology PP homopolymer; nucleating and antistatic agents
- CAS
- 9003-07-0
- TN-VED Code
- 3902 10
- Category
- Thermoplastic Polymers
Synonyms
Test Methods
ISO 1133-1 · ISO 527-1,2 · ISO 178 · ISO 180/A · ISO 75-1,2
Key features
Why this product?
- Can be processed on standard injection moulding machines. Combustible; observe fire rules for combustible materials in warehouses and store rooms. [2] Standard injection moulded specimens according to ISO 294-1.
- [2] Typical properties measured on standard injection moulded test specimen according to ISO 294-1.
- High-flow, narrow molecular-weight distribution, controlled-rheology PP homopolymer with nucleating/antistatic agents.
- Very good mechanical properties, good dimensional stability and excellent stiffness.
- Higher crystallisation temperature enables good demoulding at higher temperature and shorter cycles.
- Protect from UV and >40 °C.
- High humidity/temperature fluctuations may cause condensation inside packing; drying before use is recommended.
- 25 kg PE bags; shrink/stretch pallets, 1375 kg.
- Road/rail silo available.
- Heat-treated pallets are pooled, collected for reuse and remain the provider’s property.
- Product compliance: see DDS.
- Polymers exempt from REACH registration; monomers/relevant additives registered.
- Producer uses only REACH-compliant raw materials.
- August 2025 source reports no identified SVHC >0.1%.
- Recyclable by modern methods; keep production waste clean for direct recycling.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com