PP Impact Copolymer Injection Grade K 218
CAS 9010-79-1
Generic registry number (not stated in the manufacturer TDS)
Heterophase impact copolymer polypropylene
- MFR (230 °C, 2.16 kg)
- Typical: 16 g/10 min
- Tensile stress at yield [2]
- Typical: 30 MPa
- Tensile strain at yield [2]
- Typical: 8 %
- Modulus of elasticity in tension [2]
- Typical: 1450 MPa
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| MFR (230 °C, 2.16 kg) | Typical: 16 g/10 min | ISO 1133-1 · °C |
| Tensile stress at yield [2] | Typical: 30 MPa | ISO 527-1,2 |
| Tensile strain at yield [2] | Typical: 8 % | ISO 527-1,2 · % |
| Modulus of elasticity in tension [2] | Typical: 1450 MPa | ISO 527-1,2 |
| Izod impact strength (notched, 23 °C) [2] | Typical: 7.5 kJ/m² | ISO 180/A · °C |
| Izod impact strength (notched, −20 °C) [2] | Typical: 4 kJ/m² | ISO 180/A · °C |
| Recommended processing temperature | Typical: 190 – 240 °C | °C |
Detailed application areas
Injection moulding of boxes, pails and household articles. Not intended for medical and pharmaceutical applications. Can be used in conventional injection moulding machines.
Packaging & storage
Packaging
25 kg PE bags; 1375 kg polymer on shrink- or stretch-wrapped pallets.
Storage
Protect from UV radiation and temperatures above 40 °C.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
PP Impact Copolymer Injection Grade K 218 (CAS 9010-79-1) is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; MFR (230 °C, 2.16 kg): Typical: 16 g/10 min; Tensile stress at yield [2]: Typical: 30 MPa. KORKİMYA supplies PP Impact Copolymer Injection Grade K 218 in 25 kg PE bags; 1375 kg polymer on shrink- or stretch-wrapped pallets..
Heterophase impact copolymer polypropylene
- CAS
- 9010-79-1
- TN-VED Code
- 3902 30
- Category
- Thermoplastic Polymers
Synonyms
Test Methods
ISO 1133-1 · ISO 527-1,2 · ISO 180/A
Key features
Why this product?
- Observe fire safety rules for combustible materials. Lift adhesive-bound bags first without rotation. Drying pellets before use is recommended if moisture condenses inside packaging.
- [2] Typical properties measured on standard injection moulded test specimens according to ISO 294-1. Typical values are not to be used as specification.
- Heterophase impact copolymer with good flowability/processability; conventional injection moulding of boxes, pails and household articles.
- Not intended for medical/pharmaceutical use.
- Combustible; observe fire safety rules.
- Adhesive prevents bag slipping; lift bags first without rotation.
- Drying pellets before use is recommended if high humidity/fluctuating temperatures cause packaging condensation.
- REACH: polymers exempt; monomers/relevant additives registered, raw materials compliant; no specifically identified SVHC >0.1% at source date.
- Suitable for modern recycling; keep in-house production waste clean.
- Product compliance: DDS.
- 25 kg PE bags; shrink/stretch pallet: 1375 kg.
- Road/rail silo also available.
- Heat-treated pooled pallets are collected after use for reuse and remain the pallet provider’s property.
- Heterophase impact copolymer polypropylene for injection moulding; good flowability and processability.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com