Recycled PP GF20 Compound 50IHGF20-701
20% glass fiber filled PP (PPGF20)
- Melt flow rate
- Typical: 18 g/10 min
- Density
- Typical: 1.08 g/cm³
- Tensile modulus
- Typical: 5300 MPa
- Tensile stress at yield
- Typical: 70 MPa
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Melt flow rate | Typical: 18 g/10 min | ISO 1133 · g/10 min |
| Density | Typical: 1.08 g/cm³ | ISO 1183/A · g/cm³ |
| Tensile modulus | Typical: 5300 MPa | ISO 527-1,2 |
| Tensile stress at yield | Typical: 70 MPa | ISO 527-1,2 |
| Tensile strain at break | Typical: 3 % | ISO 527-1,2 · % |
| Charpy impact resistance (23 °C, notched) | Typical: 8 kJ/m² | ISO 179/1eA · °C |
| Heat deflection temperature | Typical: 140 °C | ISO 75-1,2 · °C |
Detailed application areas
Injection molding; automotive or general applications such as household appliances, building and construction, industrial and furniture. Must not be used for medical, pharmaceutical, food or drinking water applications.
Packaging & storage
Storage
Store dry, protected from direct sunlight. Avoid prolonged storage above 50 °C. Improper storage may deteriorate product performance.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
Recycled PP GF20 Compound 50IHGF20-701 is an industrial product in the recycled pp compounds category. Typical specifications: Melt flow rate: Typical: 18 g/10 min; Density: Typical: 1.08 g/cm³; Tensile modulus: Typical: 5300 MPa.
20% glass fiber filled PP (PPGF20); 50% post-industrial recyclate (PIR)
- Category
- Recycled PP Compounds
Synonyms
Test Methods
ISO 1133 · ISO 1183/A · ISO 527-1,2 · ISO 179/1eA · ISO 75-1,2
Key features
Why this product?
- TYPICAL PROPERTIES (NOT SPECIFICATIONS)
- Colour: Standard black
- Characteristics: High stiffness and tensile strength; long-term heat stability (LTHS)
- Easy processability on standard injection molding machines; recommended processing temperature 210–250 °C. Drying normally unnecessary; if wet during transport or storage, pre-drying for about 2 h at 80 °C is recommended. Mechanical values: several measurements on ISO 294-1 standard injection molded specimens, conditioned at room temperature for 72 h (ISO 291).
- MATERIAL: Recycling is possible with dedicated shredding / cleaning procedures. Clean in-house production waste can be directly recycled.
- Sustainable solution developed for injection molding.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com