HDPE Film Grade 7000F
Generic registry number (not stated in the manufacturer TDS)
Bimodal HDPE (butene-1)
- MFR (190 °C, 2.16 kg)
- Typical: 0.08 g/10 min
- MFR (190 °C, 5 kg)
- Typical: 0.3 g/10 min
- MFR (190 °C, 21.6 kg)
- Typical: 9 g/10 min
- Density
- Typical: 955 kg/m³
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| MFR (190 °C, 2.16 kg) | Typical: 0.08 g/10 min | ISO 1133-1 · °C |
| MFR (190 °C, 5 kg) | Typical: 0.3 g/10 min | ISO 1133-1 · °C |
| MFR (190 °C, 21.6 kg) | Typical: 9 g/10 min | ISO 1133-1 · °C |
| Density | Typical: 955 kg/m³ | ISO 1183-2 · kg/m³ |
| Tensile stress at yield | Typical: 27 / 24 MPa | ISO 527-3 |
| Tensile stress at break | Typical: 62 / 45 MPa | ISO 527-3 |
| Tensile strain at break | Typical: 500 / 550 % | ISO 527-3 · % |
| Flexural modulus | Typical: 1500 MPa | ISO 178 |
| Izod impact strength (notched) | Typical: 16 kJ/m² | ISO 180/A |
| Elmendorf tear resistance | Typical: 15 / 150 cN | ISO 6383-2 |
| Dart drop | Typical: 200 g | ISO 7765-1 method A |
| Hardness – Shore D | Typical: 64 | ISO 868 |
| Vicat softening temperature | Typical: 129 °C | ISO 306/A 120 · °C |
| Oxidation induction time | Typical: 50 min | EN 728 |
| Recommended film thickness | Typical: 0.006 – 0.06 mm | |
| Recommended processing temperature | Typical: 180 – 220 °C | °C |
Detailed application areas
Recommended: waste and storage bags, ultra-thin films. No guarantee; suitability and regulatory tests required. For conventional extrusion machines.
Packaging & storage
Packaging
25 kg PE bags; shrink/stretch-wrapped pallets, 1375 kg polymer.
Storage
Protect from UV and >40 °C. Dry pellets before use if condensation occurs.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
HDPE Film Grade 7000F is an industrial product in the thermoplastic polymers category. Typical specifications: MFR (190 °C, 2.16 kg): Typical: 0.08 g/10 min; MFR (190 °C, 5 kg): Typical: 0.3 g/10 min; MFR (190 °C, 21.6 kg): Typical: 9 g/10 min. KORKİMYA supplies HDPE Film Grade 7000F in 25 kg PE bags; shrink/stretch-wrapped pallets, 1375 kg polymer..
Bimodal HDPE (butene-1)
- TN-VED Code
- 3901 20
- Category
- Thermoplastic Polymers
Synonyms
Test Methods
ISO 1133-1 · ISO 1183-2 · ISO 527-3 · ISO 178 · ISO 180/A · ISO 6383-2 · ISO 7765-1 method A · ISO 868 · ISO 306/A 120 · EN 728
Key features
Why this product?
- Combustible; observe fire rules. Lift adhered bags without rotation first. [3] ISO 293 pressed specimens; ISO 291, room temperature. [14] Several measurements averaged; film 0.015 mm, blow-up 4:1; MD machine / TD transverse direction.
- [3] Standard pressed specimens (ISO 293), conditioned at room temperature (ISO 291).
- [14] Average mechanical values of several measurements on 0.015 mm film; blow up ratio 4:1. MD = machine direction, TD = transverse direction.
- Bimodal butene-1 HDPE: excellent mechanical strength, good stiffness and high-speed processability; antioxidant/acid scavenger.
- Waste/storage bags, ultra-thin films; conventional extrusion.
- Recommendations not guaranteed; user must test application suitability and final-article regulatory compliance (e.g. food contact).
- Product compliance: DDS.
- Avoid UV and >40 °C.
- If high humidity/temperature changes cause condensation in packaging, dry pellets.
- Modern recycling suitable; keep in-house waste clean for direct recycling.
- 25 kg PE bags; shrink/stretch pallets, 1375 kg polymer.
- Heat-treated pooling pallets belong to provider; collected after use for reuse.
- Polymers registration-exempt; monomers/relevant additives registered.
- Only REACH-compliant raw materials.
- No identified SVHC >0.1% at publication.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com