HDPE Injection Moulding Grade 3100J
Generic registry number (not stated in the manufacturer TDS)
Unimodal HDPE copolymer
- MFR (190 °C, 2.16 kg)
- Typical: 2 g/10 min
- Density (23 °C)
- Typical: 952 kg/m³
- Tensile stress at yield
- Typical: 25 MPa
- Tensile strain at yield
- Typical: 12 %
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| MFR (190 °C, 2.16 kg) | Typical: 2 g/10 min | ISO 1133-1 · °C |
| Density (23 °C) | Typical: 952 kg/m³ | ISO 1183-2 · °C |
| Tensile stress at yield | Typical: 25 MPa | ISO 527-1,2 |
| Tensile strain at yield | Typical: 12 % | ISO 527-1,3 · % |
| Tensile stress at break | Typical: 25 MPa | ISO 527-1,3 |
| Tensile strain at break | Typical: 1100 % | ISO 527-1,2 · % |
| Flexural modulus | Typical: 1000 MPa | ISO 178 |
| Izod impact strength (notched, 23 °C) | Typical: 11.5 kJ/m² | ISO 180/A · °C |
| Hardness – Shore D | Typical: 62 | ISO 868 |
| Vicat softening temperature | Typical: 127 °C | ISO 306/A 120 · °C |
| ESCR F50 B (100% Igepal CO-630) | Typical: 20 h | ASTM D1693 · % |
| OIT (200 °C) | Typical: 60 min | EN 728 · °C |
| Recommended injection melt temperature | Typical: 210 – 250 °C | °C |
| Recommended compression moulding temperature | Typical: 170 – 200 °C | °C |
Detailed application areas
Caps and closures, overcaps, engineering and technical parts. Users must test suitability and final articles for regulatory compliance.
Packaging & storage
Packaging
25 kg polyethylene bag
Storage
Do not expose to UV radiation or temperatures above 40 °C.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
HDPE Injection Moulding Grade 3100J is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; MFR (190 °C, 2.16 kg): Typical: 2 g/10 min; Density (23 °C): Typical: 952 kg/m³. KORKİMYA supplies HDPE Injection Moulding Grade 3100J in 25 kg polyethylene bag.
Unimodal HDPE copolymer; butene-1
- TN-VED Code
- 3901 20
- Category
- Thermoplastic Polymers
Synonyms
Test Methods
ISO 1133-1 · ISO 1183-2 · ISO 527-1,2 · ISO 527-1,3 · ISO 178 · ISO 180/A · ISO 868 · ISO 306/A 120 · ASTM D1693 · EN 728
Key features
Why this product?
- Combustible; observe fire rules. Lift bags without rotation first. Dry pellets if moisture condenses.
- 25 kg polyethylene bags; 1375 kg polymer on shrink- or stretch-wrapped pallets.
- [3] Standard pressed specimens (ISO 293), conditioned at room temperature (ISO 291).
- [13] Average of several measurements on standard injection moulded specimens (ISO 294-1), conditioned at room temperature (ISO 291).
- Anti-slip adhesive: lift bags without rotation first.
- Offers good organoleptic properties and environmental stress crack resistance; slip agent free, contains antioxidant and acid scavenger.
- Suitable for conventional injection and compression moulding machines.
- Recyclable by modern methods; keep in-house production waste clean for direct recycling.
- Protect from UV and >40 °C.
- High humidity and temperature changes may cause condensation in packaging; dry before use.
- 25 kg PE bags; 1375 kg/pallet, shrink/stretch wrapped.
- Heat-treated PRS pallets remain PRS property; the pooling system collects them after use for reuse.
- Product compliance: see DDS.
- Polymers exempt from REACH registration; monomers/relevant additives registered.
- Only REACH-compliant raw materials used; no identified SVHC >0.1%.
- [3] ISO 293 pressed; [13] ISO 294-1 injection, average of several measurements.
- Both: ISO 291 room-temperature conditioning.
- ISO 293 pressed specimens, ISO 291 room-temperature conditioning.
- Average of several measurements on ISO 294-1 injection specimens, ISO 291 room-temperature conditioning.
- SDS available on request.
- Adhesive is used between bags to prevent slipping.
- Only REACH-compliant raw materials are used.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com