LDPE Film Grade FB 2-51
CAS 9002-88-4
Generic registry number (not stated in the manufacturer TDS)
Low density polyethylene
- MFR (190 °C, 2.16 kg)
- Typical: 2 g/10 min
- Density (23 °C) [1]
- Typical: 923 kg/m³
- Tensile stress at break (MD/TD) [7]
- Typical: 20 / 19 MPa
- Tensile strain at break (MD/TD) [7]
- Typical: 450 / 580 %
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| MFR (190 °C, 2.16 kg) | Typical: 2 g/10 min | ISO 1133-1 · °C |
| Density (23 °C) [1] | Typical: 923 kg/m³ | ISO 1183-1 · °C |
| Tensile stress at break (MD/TD) [7] | Typical: 20 / 19 MPa | ISO 527-1,3 |
| Tensile strain at break (MD/TD) [7] | Typical: 450 / 580 % | ISO 527-1,3 · % |
| Dart drop [7] | Typical: 160 g | ISO 7765-1 method A |
| Haze [7] | Typical: 6 % | ASTM D1003 · % |
| Vicat softening temperature [2] | Typical: 93 °C | ISO 306/A 50 · °C |
| Antiblock agent content | Typical: 1000 ppm | ppm |
| Slip agent content | Typical: 500 ppm | ppm |
| Recommended film thickness | Typical: 0.02 – 0.06 mm | |
| Recommended processing temperature | Typical: 160 – 200 °C | °C |
Detailed application areas
Thin slip films for automatic packaging; bags, pouches, shrink and cast films. Can be used in conventional extrusion machines. Users must conduct their own tests for suitability and final article regulatory compliance.
Packaging & storage
Packaging
25 kg PE bags; 1375 kg polymer on shrink- or stretch-wrapped pallets. Road or rail silo transport is also available.
Storage
Protect from UV radiation and temperatures above 40 °C.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
LDPE Film Grade FB 2-51 (CAS 9002-88-4) is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; MFR (190 °C, 2.16 kg): Typical: 2 g/10 min; Density (23 °C) [1]: Typical: 923 kg/m³. KORKİMYA supplies LDPE Film Grade FB 2-51 in 25 kg PE bags; 1375 kg polymer on shrink- or stretch-wrapped pallets. Road or rail silo transport is also available..
Low density polyethylene
- CAS
- 9002-88-4
- TN-VED Code
- 3901 10
- Category
- Thermoplastic Polymers
Synonyms
Test Methods
ISO 1133-1 · ISO 1183-1 · ISO 527-1,3 · ISO 7765-1 method A · ASTM D1003 · ISO 306/A 50
Key features
Why this product?
- Observe fire safety rules for combustible materials. Drying pellets before use is recommended if moisture condenses inside packaging under high humidity and fluctuating temperatures.
- Contains erucamide slip agent and antiblocking agent. [1] Pressed mould specimen, internal method. [2] ISO 294-1 injection specimen. [7] 50 µm blown film; melt 180 °C, blow up ratio 2.5:1.
- Combustible; observe fire safety rules.
- Drying pellets before use is recommended if high humidity/fluctuating temperatures cause packaging condensation.
- REACH: polymers exempt; monomers/relevant additives registered, raw materials compliant; no specifically identified SVHC >0.1% at source date.
- Suitable for modern recycling; keep in-house production waste clean.
- Product compliance: DDS.
- 25 kg PE bags; shrink/stretch pallet: 1375 kg.
- Road/rail silo also available.
- Heat-treated pooled pallets are collected after use for reuse and remain the pallet provider’s property.
- Only REACH-compliant raw materials are used.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com