LDPE Foamed Sheet Grade FD 244-55
CAS 9002-88-4
Generic registry number (not stated in the manufacturer TDS)
Low density polyethylene
- MFR (190 °C / 2.16 kg)
- Typical: 4.75 g/10 min
- Density (23 °C) [3]
- Typical: 922 kg/m³
- Tensile stress at break (MD/TD) [11]
- Typical: 20 / 14 MPa
- Tensile strain at break (MD/TD) [11]
- Typical: 313 / 532 %
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| MFR (190 °C / 2.16 kg) | Typical: 4.75 g/10 min | ISO 1133-1 · °C |
| Density (23 °C) [3] | Typical: 922 kg/m³ | ISO 1183-2 · °C |
| Tensile stress at break (MD/TD) [11] | Typical: 20 / 14 MPa | ISO 527-3 |
| Tensile strain at break (MD/TD) [11] | Typical: 313 / 532 % | ISO 527-3 · % |
| Dart drop [11] | Typical: 86 g | ISO 7765-1 method A |
| Haze [11] | Typical: 9 % | ISO 14782 · % |
| Vicat softening temperature [3] | Typical: 90 °C | ISO 306/A 120 · °C |
| Antiblock agent content | Typical: 800 ppm | Internal method · ppm |
| Slip agent content | Typical: 400 ppm | Internal method · ppm |
| Recommended film thickness | Typical: 0.015 – 0.04 mm | |
| Recommended processing temperature | Typical: 170 – 190 °C | °C |
Detailed application areas
All types of foam produced with chemical blowing agents or physical gases, crosslinked and non crosslinked; high clarity fine films and caps. Suitability and regulatory compliance, including food contact, require user testing.
Packaging & storage
Packaging
25 kg PE bags; shrink- or stretch-wrapped pallets, 1375 kg polymer.
Storage
Protect from UV radiation and temperatures above 40 °C.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
LDPE Foamed Sheet Grade FD 244-55 (CAS 9002-88-4) is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; MFR (190 °C / 2.16 kg): Typical: 4.75 g/10 min; Density (23 °C) [3]: Typical: 922 kg/m³. KORKİMYA supplies LDPE Foamed Sheet Grade FD 244-55 in 25 kg PE bags; shrink- or stretch-wrapped pallets, 1375 kg polymer..
Low density polyethylene
- CAS
- 9002-88-4
- TN-VED Code
- 3901 10
- Category
- Thermoplastic Polymers
Synonyms
Test Methods
ISO 1133-1 · ISO 1183-2 · ISO 527-3 · ISO 7765-1 method A · ISO 14782 · ISO 306/A 120 · Internal method
Key features
Why this product?
- Use conventional extrusion machines. Observe combustible-material rules; lift adhesive-secured bags without rotation. Dry pellets if condensation occurs.
- Density and Vicat values measured on standard pressed specimens (ISO 293), conditioned at room temperature (ISO 291).
- Film properties in MD/TD: thickness 0.07 mm for MFR = 0.3 g/10 min and 0.04 mm for MFR > 0.3 g/10 min; blow-up ratio 2:1.
- Foamed-sheet grade; films have good mechanical properties; contains slip and antiblock agents.
- Crosslinked/non-crosslinked foams with chemical blowing agents/physical gases, high-clarity fine films and caps.
- User tests must verify suitability and regulatory compliance, including food contact.
- Compliance: DDS.
- Combustible-material warehouse rules; lift bags first without rotation due to anti-slip adhesive.
- [3] ISO 293 pressed specimens; ISO 291 room-temperature conditioning.
- [11] MD/TD film: 0.07 mm at MFR=0.3; 0.04 mm at MFR>0.3 g/10 min; blow-up ratio 2:1.
- Protect from UV and >40 °C.
- High humidity/temperature changes may cause condensation inside packaging; dry pellets before use.
- 25 kg PE bags; shrink/stretch pallets, 1375 kg.
- Road/rail silo also available.
- Heat-treated pooled pallets are collected after use for reuse; remain provider property.
- Polymer registration exemption; monomers/relevant additives registered; only REACH-compliant raw materials.
- August 2025: no identified SVHC >0.1%.
- Modern recycling methods; keep in-house waste clean for direct recycling.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com