Polyethylene PE4BP-30
Supply specifications, test methods and typical values for your technical assessment.
Technical Specifications
| Parameter | Value | Test method |
|---|---|---|
| Production method | Gas-phase polymerisation using Unipol technology | — |
| Processing method | Extrusion, blow moulding | — |
| Density (at 23°C), g/cm³ | 0,930 - 0,935 | ASTM D 1505 / ISO 1183 · °C |
| Melt flow index, g/10 min, 190°C/5,0 kgf | 1,1 - 1,5 | ASTM D 1238 / ISO 1133 · g/10 min |
| MFI21,6/MFI5 ratio, min. | min 18 | ASTM D 1238 / ISO 1133 |
| Within-batch MFI deviation, %, max. | ±10 | ASTM D 1238 / ISO 1133 · % |
| Purity grade, min. | min 90 | — |
| Tensile yield strength, MPa (kgf/cm²), min. | min 13,7 (140) | ASTM D 638 / ISO 527 |
| Tensile strength, MPa (kgf/cm²), min. | min 24,5 (250) | ASTM D 638 / ISO 527 |
| Elongation at break, %, min. | min 600 | ASTM D 638 / ISO 527 · % |
| Film appearance test, points, min. | min +30 | — |
| Tensile test, min, min. | min 20 | — |
| Cracking resistance (ESCR), hours, min. | min 1000 | ASTM D 1693 |
| Brittleness temperature, °C, max. | max -70 | ASTM D 746 / ISO 974 · °C |
| Thermostability (210°C), min, min. | min 20 | ASTM D 3895 / ISO 11357-6 · °C |
Application Areas
General-purpose pipes and fittings; blow-moulded containers up to 20 litres; various films from 15 microns. Corresponds to PE 63 class according to ISO 9080:2003.
- Pipe Manufacturing
- Fittings Manufacturing
- Blow Moulding
- Film Production
- General Polymer Manufacturing
Packaging & storage
Packaging
Polyethylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road.
Shelf Life
5 years from the date of manufacture
Documents & product information
Technical Data Sheet
For the complete product record, applications and related products, review the product details.
Full product details ↗Safety & lot documents
Request the current SDS and the certificate of analysis for the lot under assessment.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Document date:
This document shows the applicable KORKİMYA supply specification for Polyethylene PE4BP-30 supplied by KORKİMYA. This document is not a lot analysis result. A lot-specific certificate of analysis is issued with every shipment.
For full product information, see the Polyethylene PE4BP-30 product page.