Polypropylene RPG2019-25
Blow Moulding · Transparent Container Manufacturing · Multilayer Sheet Extrusion
- Production method
- Gas-phase propylene-ethylene copolymerisation
- Melt flow index, g/10 min
- 1,6 – 2,2
- Within-batch melt flow index deviation, %, max.
- max ±10
- Tensile yield strength, MPa, min.
- min 26
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Production method | Gas-phase propylene-ethylene copolymerisation | — |
| Melt flow index, g/10 min | 1,6 – 2,2 | g/10 min |
| Within-batch melt flow index deviation, %, max. | max ±10 | % |
| Tensile yield strength, MPa, min. | min 26 | — |
| Elongation at yield, %, min. | min 9 | % |
| Mass fraction of volatile matter, %, max. | max 0,09 | % |
Detailed application areas
For blow moulding of transparent containers and extrusion of multilayer sheets.
Use Cases
- Blow Moulding
- Transparent Container Manufacturing
- Multilayer Sheet Extrusion
- Packaging Industry
Packaging & storage
Packaging
Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road.
Shelf Life
3 years from the date of manufacture
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
View technical data sheet ↗Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
Regulatory and compliance
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
Polypropylene RPG2019-25 is a grade used in blow moulding of transparent containers and multilayer sheet extrusion, with a melt flow index of 1.6-2.2 g/10 min. Other stated values: Tensile yield strength min 26 MPa; Elongation at yield min 9 %. Typical specifications: Production method: Gas-phase propylene-ethylene copolymerisation; Melt flow index, g/10 min 1,6–2,2; Within-batch melt flow index deviation, %, max. ±10. KORKİMYA supplies Polypropylene RPG2019-25 in Polypropylene is packed in 25 kg polyethylene or polypropylene bags and transported by rail and road.. Shelf life: 3 years from the date of manufacture.
For blow moulding of transparent containers and extrusion of multilayer sheets.
Polypropylene RPG2019-25 is a grade used in blow moulding of transparent containers and multilayer sheet extrusion, with a melt flow index of 1.6-2.2 g/10 min. Other stated values: Tensile yield strength min 26 MPa; Elongation at yield min 9 %.
- Category
- Thermoplastic Polymers
Frequently asked questions
Where is RPG2019-25 used?
Polypropylene RPG2019-25 is used in blow moulding of transparent containers and multilayer sheet extrusion. Areas of use: Blow Moulding, Transparent Container Manufacturing, Multilayer Sheet Extrusion, Packaging Industry. Production method: Gas-phase propylene-ethylene copolymerisation.
What are the melt flow index and batch deviation of RPG2019-25?
The melt flow index of RPG2019-25 is 1.6-2.2 g/10 min. Within-batch melt flow index deviation max ±10 %.
Which other values are stated for RPG2019-25?
Stated values for RPG2019-25: Tensile yield strength min 26 MPa; Elongation at yield min 9 %; Mass fraction of volatile matter max 0.09 %.
Related Products
Last updated: 04/10/2026
MSDS Available · Export Registered · korkimya.com