PP Homopolymer Injection Grade H 218
CAS 9003-07-0
Generic registry number (not stated in the manufacturer TDS)
Low molecular weight polypropylene homopolymer
- MFR (230 °C, 2.16 kg)
- Typical: 22 g/10 min
- Tensile stress at yield [2]
- Typical: 36 MPa
- Tensile strain at yield [2]
- Typical: 9 %
- Modulus of elasticity in tension [2]
- Typical: 1600 MPa
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| MFR (230 °C, 2.16 kg) | Typical: 22 g/10 min | ISO 1133-1 · °C |
| Tensile stress at yield [2] | Typical: 36 MPa | ISO 527-1,2 |
| Tensile strain at yield [2] | Typical: 9 % | ISO 527-1,2 · % |
| Modulus of elasticity in tension [2] | Typical: 1600 MPa | ISO 527-1,2 |
| Izod impact strength (notched, 23 °C) [2] | Typical: 4 kJ/m² | ISO 180/A · °C |
| Ethylene content | Typical: 0–3 % | Internal method · % |
| Recommended processing temperature | Typical: 190 – 240 °C | °C |
Detailed application areas
Injection moulding of thin-walled containers, household articles, cups and closures. Can be used in conventional injection moulding machines. Not intended for medical & pharmaceutical applications.
Packaging & storage
Packaging
25 kg PE bags; 1375 kg polymer on shrink- or stretch-wrapped pallets. Road or rail silo transport is also available.
Storage
Protect from UV radiation and temperatures above 40 °C.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
PP Homopolymer Injection Grade H 218 (CAS 9003-07-0) is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; MFR (230 °C, 2.16 kg): Typical: 22 g/10 min; Tensile stress at yield [2]: Typical: 36 MPa. KORKİMYA supplies PP Homopolymer Injection Grade H 218 in 25 kg PE bags; 1375 kg polymer on shrink- or stretch-wrapped pallets. Road or rail silo transport is also available..
Low molecular weight polypropylene homopolymer
- CAS
- 9003-07-0
- TN-VED Code
- 3902 10
- Category
- Thermoplastic Polymers
Synonyms
Test Methods
ISO 1133-1 · ISO 527-1,2 · ISO 180/A · Internal method
Key features
Why this product?
- Observe fire safety rules for combustible materials. Lift adhesive-held bags first without rotation. If moisture condenses inside packaging, drying pellets before use is recommended.
- [2] Typical properties measured on standard injection-moulded specimens according to ISO 294-1. Values are not to be used as specification.
- Low molecular weight PP homopolymer with narrow molecular weight distribution and high melt flow; may contain 0–3% ethylene due to production technology.
- Suitable for modern recycling methods; keep in-house production waste clean for direct recycling.
- [2] Typical properties measured on standard injection-moulded specimens per ISO 294-1.
- Protect from UV and temperatures above 40 °C.
- High humidity and fluctuating temperatures may cause condensation inside packaging; drying pellets before use is then recommended.
- Heat-treated pooled pallets are collected after use for reuse and remain the pallet provider’s property.
- Product compliance: see DDS.
- Polymers are exempt from REACH registration; monomers and relevant additives are registered, raw materials are REACH compliant.
- At source revision, no specifically identified SVHC >0.1%.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com