PP Impact Copolymer Injection Grade IM 15 79
CAS 9010-79-1
Generic registry number (not stated in the manufacturer TDS)
Controlled-rheology PP impact copolymer
- Melt mass-flow rate (230 °C, 2.16 kg)
- Typical: 15 g/10 min
- Tensile stress at yield [2]
- Typical: 20 MPa
- Tensile strain at yield [2]
- Typical: 10 %
- Flexural modulus [2]
- Typical: 1050 MPa
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| Melt mass-flow rate (230 °C, 2.16 kg) | Typical: 15 g/10 min | ISO 1133-1 · °C |
| Tensile stress at yield [2] | Typical: 20 MPa | ISO 527-1,2 |
| Tensile strain at yield [2] | Typical: 10 % | ISO 527-1,2 · % |
| Flexural modulus [2] | Typical: 1050 MPa | ISO 178 |
| Izod impact (notched, 23 °C) [12] | Typical: 43 kJ/m² | ISO 180/A · °C |
| Izod impact (notched, −20 °C) [12] | Typical: 6.5 kJ/m² | ISO 180/A · °C |
| Shore D hardness [2] | Typical: 55 | ISO 868 |
| HDT (0.45 MPa, flatwise) [2] | Typical: 74 °C | ISO 75-1,2 · °C |
| Recommended processing temperature | Typical: 190 – 250 °C | °C |
Detailed application areas
Injection moulding of heavy-duty products requiring high impact resistance and good stiffness: storage and transport containers, medical containers, luggage, pails, car parts and technical articles. Matrix for automotive and other industrial compounds. Suitability and regulatory compliance require user tests.
Packaging & storage
Packaging
25 kg PE bags; 1375 kg polymer on shrink- or stretch-wrapped pallets. Road or rail silo transport is also available.
Storage
Protect from UV radiation and temperatures above 40 °C.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
PP Impact Copolymer Injection Grade IM 15 79 (CAS 9010-79-1) is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; Melt mass-flow rate (230 °C, 2.16 kg): Typical: 15 g/10 min; Tensile stress at yield [2]: Typical: 20 MPa. KORKİMYA supplies PP Impact Copolymer Injection Grade IM 15 79 in 25 kg PE bags; 1375 kg polymer on shrink- or stretch-wrapped pallets. Road or rail silo transport is also available..
Controlled-rheology PP impact copolymer; nucleating and antistatic agents
- CAS
- 9010-79-1
- TN-VED Code
- 3902 30
- Category
- Thermoplastic Polymers
Synonyms
Test Methods
ISO 1133-1 · ISO 527-1,2 · ISO 178 · ISO 180/A · ISO 868 · ISO 75-1,2
Key features
Why this product?
- Can be processed on standard injection moulding machines. Observe warehouse fire safety rules for combustible materials. If moisture condenses in packaging, drying pellets before use is recommended.
- [2] ISO 294-1 injection specimens; [12] injection specimens per internal method. FMVSS302 (1998): 36.5 mm/min; horizontal, 356 × 74 × 2.2–2.7 mm press-moulded specimens.
- Good flow, improved stiffness.
- Excellent room-temperature and very good subzero impact resistance.
- Compliance: see DDS.
- Recyclable by modern methods; keep production waste clean for direct recycling.
- Polymers exempt from registration; monomers/relevant additives registered.
- Only REACH-compliant raw materials.
- August 2025 source: no identified SVHC >0.1%.
- Controlled-rheology PP impact copolymer; nucleating/antistatic agents.
- 25 kg PE bags; shrink/stretch-wrapped 1375 kg pallets.
- Road/rail silo transport available.
- Heat-treated pooled pallets are collected for reuse; owned by provider.
- [2] ISO 294-1 injection specimens; [12] internal-method injection specimens.
- FMVSS302 (1998): 36.5 mm/min, horizontal; press-moulded specimen 356 × 74 × 2.2–2.7 mm.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com