HDPE Recycled Blow Molding Grade 30CHDUF00-2D11
Bimodal HDPE
- MFR (190 °C / 2.16 kg)
- Typical: 0.3 g/10 min
- MFR (190 °C / 5 kg)
- Typical: 1.3 g/10 min
- MFR (190 °C / 21.6 kg)
- Typical: 30 g/10 min
- Density
- Typical: 0.957 g/cm³
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| MFR (190 °C / 2.16 kg) | Typical: 0.3 g/10 min | ISO 1133 · °C |
| MFR (190 °C / 5 kg) | Typical: 1.3 g/10 min | ISO 1133 · °C |
| MFR (190 °C / 21.6 kg) | Typical: 30 g/10 min | ISO 1133 · °C |
| Density | Typical: 0.957 g/cm³ | ISO 1183/A · g/cm³ |
| Flexural modulus | Typical: 1450 MPa | ISO 178 |
| Tensile stress at yield | Typical: 28 MPa | ISO 527-1,2 |
| Tensile strain at break (MD/TD) | Typical: 600 % | ISO 527-1,2 · % |
| Izod impact resistance (23 °C, notched) | Typical: 10 kJ/m² | ISO 180/A · °C |
| ESCR F50 B (100% Igepal CO-630) | Typical: 225 h | ASTM D1693 · % |
| Oxidation induction time | Typical: 33 min | EN 728 |
Detailed application areas
Extrusion blow molding; alternative to 6000B. Bottles and cans up to 5 litres for non-aggressive household chemicals, cosmetics and oils; non-pressure and corrugated pipes. Must not be used for medical, pharmaceutical, food, drinking water or toy applications.
Packaging & storage
Packaging
Big-bags or 25 kg PE bags; shrink/stretch-wrapped pallets.
Storage
Protect from UV and temperatures above 40 °C. High humidity and fluctuating temperatures may cause condensation inside packing; dry before use.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
HDPE Recycled Blow Molding Grade 30CHDUF00-2D11 is an industrial product in the pe compounds category. Typical specifications: MFR (190 °C / 2.16 kg): Typical: 0.3 g/10 min; MFR (190 °C / 5 kg): Typical: 1.3 g/10 min; MFR (190 °C / 21.6 kg): Typical: 30 g/10 min. KORKİMYA supplies HDPE Recycled Blow Molding Grade 30CHDUF00-2D11 in Big-bags or 25 kg PE bags; shrink/stretch-wrapped pallets..
Bimodal HDPE; 30% post-consumer recyclate (PCR)
- Category
- PE Compounds
Synonyms
Test Methods
ISO 1133 · ISO 1183/A · ISO 178 · ISO 527-1,2 · ISO 180/A · ASTM D1693 · EN 728
Key features
Why this product?
- TYPICAL PROPERTIES (NOT SPECIFICATIONS)
- Appearance: Grey or white pellets
- Processing: 180–220 °C; drying normally unnecessary. If wet, pre-dry for about 2 h at 80 °C. Combustible; observe fire safety rules. Lift adhered bags first without rotation. Mechanical values: ISO 293 compression molded specimens; ISO 291, conditioned at room temperature for 72 h.
- Recycling is possible using dedicated shredding/cleaning procedures; clean in-house production waste can be directly recycled.
- Lowered carbon footprint; special additivation enables repeated recycling.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com