HDPE Blow Moulding Grade BS 479-02
Generic registry number (not stated in the manufacturer TDS)
High density polyethylene copolymer with hexen-1 comonomer and antioxidants
- MFR - Melt Mass-Flow Rate (190 °C, 2.16 kg)
- Typical: 0.15 g/10 min
- Density (23 °C) [3]
- Typical: 947 kg/m³
- Flexural Modulus [3]
- Typical: 1100 MPa
- Hardness - Shore D [4]
- Typical: 65
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| MFR - Melt Mass-Flow Rate (190 °C, 2.16 kg) | Typical: 0.15 g/10 min | ISO 1133-1 · °C |
| Density (23 °C) [3] | Typical: 947 kg/m³ | ISO 1183-2 · °C |
| Flexural Modulus [3] | Typical: 1100 MPa | ISO 178 |
| Hardness - Shore D [4] | Typical: 65 | ISO 868 |
| Vicat Softening Temperature [4] | Typical: 127 °C | ISO 306/A 120 · °C |
| ESCR F50 B (100% Igepal CO-630) [3] | Typical: 350 h | ASTM D1693 · % |
| Recommended Processing Temperature | Typical: 170 – 220 °C | °C |
Detailed application areas
Blow moulding of bottles and cans for packaging detergents and aggressive household chemicals; sheets, non-pressure protective pipes and corrugated pipes. For products requiring good environmental stress cracking resistance (ESCR) and high rigidity.
Packaging & storage
Packaging
25 kg polyethylene bags
Storage
Do not expose to UV radiation or temperatures above 40 °C. High humidity and fluctuating temperatures may cause condensation inside packaging.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
HDPE Blow Moulding Grade BS 479-02 is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; MFR - Melt Mass-Flow Rate (190 °C, 2.16 kg): Typical: 0.15 g/10 min; Density (23 °C) [3]: Typical: 947 kg/m³. KORKİMYA supplies HDPE Blow Moulding Grade BS 479-02 in 25 kg polyethylene bags.
High density polyethylene copolymer with hexen-1 comonomer and antioxidants
- TN-VED Code
- 3901 20
- Category
- Thermoplastic Polymers
Synonyms
Test Methods
ISO 1133-1 · ISO 1183-2 · ISO 178 · ISO 868 · ISO 306/A 120 · ASTM D1693
Key features
Why this product?
- Can be used in conventional extrusion machines. Adhesive is used between bags; first lift without rotation when removing from pallets. Observe fire safety rules for combustible materials. Dry pellets before use if moisture condenses inside packaging. SDS available on request. [3] ISO 293 pressed specimens conditioned at room temperature (ISO 291). [4] Average of several measurements on specimens under the same conditions.
- 25 kg polyethylene bags; shrink-wrapped or stretch-wrapped pallets with 1375 kg polymer load.
- [3] Values measured on standard pressed specimens (ISO 293) conditioned at room temperature (ISO 291).
- [4] Average mechanical property values of several measurements carried out on standard pressed specimens (ISO 293) conditioned at room temperature (ISO 291).
- Heat-treated PRS pallets are pooled, collected after use and reused; ownership remains with PRS.
- Polymers are exempt from REACH registration; monomers and relevant additives have been registered.
- The producer commits to using only REACH-compliant raw materials.
- No specifically identified SVHC at levels greater than 0.1% at the time of the source statement.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com