HDPE Blow Moulding Grade BS 529-17
Generic registry number (not stated in the manufacturer TDS)
HDPE copolymer with hexen-1 comonomer
- MFR (190 °C, 2.16 kg)
- Typical: 0.13 g/10 min
- Density at 23 °C [3]
- Typical: 950 kg/m³
- Flexural Modulus [3]
- Typical: 1400 MPa
- Hardness – Shore D [4]
- Typical: 64
Technical Specifications
| Parameter | Value | Method / unit |
|---|---|---|
| Appearance | Pellets | |
| MFR (190 °C, 2.16 kg) | Typical: 0.13 g/10 min | ISO 1133-1 · °C |
| Density at 23 °C [3] | Typical: 950 kg/m³ | ISO 1183-2 · °C |
| Flexural Modulus [3] | Typical: 1400 MPa | ISO 178 |
| Hardness – Shore D [4] | Typical: 64 | ISO 868 |
| Vicat Softening Temperature [3] | Typical: 127 °C | ISO 306/A 120 · °C |
| ESCR F50 B (100% Igepal CO-630) [3] | Typical: 100 h | ASTM D1693 · % |
| Recommended Processing Temperature | Typical: 170 – 220 °C | °C |
Detailed application areas
Blow moulding of bottles and cans for packaging detergents and aggressive household chemicals; sheets, non-pressure protective pipes and corrugated pipes. Can be processed in conventional extrusion machines.
Packaging & storage
Packaging
25 kg polyethylene bags; shrink-wrapped or stretch-wrapped pallets with 1375 kg polymer load.
Storage
Avoid UV radiation and temperatures above 40 °C. High humidity and fluctuating temperatures may cause condensation inside packaging.
Documents
Technical data sheet (TDS)
Review the recorded specifications, packaging and storage information.
Safety & lot documents
Request the current SDS and the certificate of analysis (CoA) for the lot you are evaluating.
KORKİMYA supply assurance
Stock in Türkiye
Current availability is confirmed by product and lot with your quote.
KKDİK registered
Every catalog product is KKDİK registered for Türkiye.
CoA for every lot
Verify technical values against the lot's certificate of analysis.
TL invoicing
Turkish lira invoicing is available for domestic purchases.
Payment terms
Discuss terms for your quantity and supply plan when requesting a quote.
Request Sample
Product Information
HDPE Blow Moulding Grade BS 529-17 is an industrial product in the thermoplastic polymers category. Typical specifications: Appearance: Pellets; MFR (190 °C, 2.16 kg): Typical: 0.13 g/10 min; Density at 23 °C [3]: Typical: 950 kg/m³. KORKİMYA supplies HDPE Blow Moulding Grade BS 529-17 in 25 kg polyethylene bags; shrink-wrapped or stretch-wrapped pallets with 1375 kg polymer load..
HDPE copolymer with hexen-1 comonomer; contains antioxidants
- TN-VED Code
- 3901 20
- Category
- Thermoplastic Polymers
Synonyms
Test Methods
ISO 1133-1 · ISO 1183-2 · ISO 178 · ISO 868 · ISO 306/A 120 · ASTM D1693
Key features
Why this product?
- Adhesive prevents bags from slipping; lift bags from pallets first without rotation. Observe fire safety rules for combustible materials. Dry pellets before use if moisture has condensed inside the packaging.
- Values measured on standard pressed specimens (ISO 293) conditioned at room temperature (ISO 291).
- Average mechanical property values of several measurements on standard pressed specimens (ISO 293) conditioned at room temperature (ISO 291).
- [3] ISO 293 pressed specimens; ISO 291, room temperature.
- [4] Mechanical averages of several measurements under the same conditions.
- HDPE copolymer with hexen-1; antioxidants; good ESCR and high rigidity.
- Heat-treated pooling pallets are collected after use for reuse and remain the pallet provider’s property.
- Polymers are REACH-exempt; monomers/relevant additives are registered.
- Only REACH-compliant raw materials are used.
- At source revision, no identified SVHC >0.1%.
- Product compliance: DDS.
- Suitable for modern recycling; keep in-house waste clean for direct recycling.
Related Products
Last updated: 11/10/2026
MSDS Available · Export Registered · korkimya.com